Manualshelf

Owner`s manual

ManualsBrandsMultitech ManualsChassisCC4800
31323334353637383940
Chapter 4 - Commands
39
gettrap
Parameters:
None
Description: Display the configured trap address. The gettrap command displays the default trap IP
address (if one is set) for the MR4800E. This is the address to which the MR4800E generated traps
(i.e. fault/status traps) are sent.
Security: Guest
Example:
[0] A:\MMM # gettrap
Trap IP Address = 199.199.99.91
[1] A:\MMM #
getwritecommunity
Parameters:
None
Description: Displays the Write community settings.
Security: Supervisor
Example:
[0] A:\MMM # getwritecommunity
Write community = public
Enter SETWRITECOMMUNITY <community-string> to change it.
[1] A:\MMM #
history
Parameters:
None
Description: Displays the command history buffer.
Security: Guest
Example:
[4] A:\ # history
0 VER
1 CLOCK
2 VER
3 CLOCK
4 HISTORY
[5] A:\ #