Owner`s manual

CC1600-Series Owner's Manual

Introduction

Multi-Tech rackmount modems are generally used in a central

site computer environment (i.e., connected to a mini or

mainframe computer) to automatically answer incoming calls

from remote users.

Command mode should be disabled unless you wish to give

the modem commands. Leaving command mode enabled

offers the possibility of a user calling into the modem and

reconfiguring it, or causing it to dial out. Refer to the

appropriate modem owner’s manual to configure the modem

for your application.

Safety Warnings

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless the

jack is specifically designed for wet locations.

3. Never touch uninsulated telephone wires or terminals

unless the telephone line has been disconnected at the

network interface.

4. Use caution when installing or modifying telephone lines.

5. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk of

electrical shock from lightning.

6. Do not use the telephone to report a gas leak in the vicinity

of the leak.