User Manual

Helpful Hints for Programme Card.

Move the little black plastic jumpers to line up with the setting you require,ie,battery type,if using

a nicad/nimh line it up with NiXX,for lipo line it up with LiXX etc.When you have made your

selections plug your ESC Rx plug onto the socket marked "Controller",connect your ESC to your

battery and it should programme those settings into it.If it is an "Opto" type ESC then you will also

need to plug a 4.8v-6v battery onto the socket marked "External power for Opto".

Gary Product Specialist.

PAGE 1
Helpful Hints for Programme Card. Move the little black plastic jumpers to line up with the setting you require,ie,battery type,if using a nicad/nimh line it up with NiXX,for lipo line it up with LiXX etc.When you have made your selections plug your ESC Rx plug onto the socket marked "Controller",connect your ESC to your battery and it should programme those settings into it.If it is an "Opto" type ESC then you will also need to plug a 4.8v-6v battery onto the socket marked "External power for Opto".