PARTS AND OPERATION MANUAL © COPYRIGHT 2001, MULTIQUIP INC. PLASTER / MORTAR MIXERS WM-120P Series (Polyethylene Drum Hydraulic) WM-120S Series (Steel-Drum Hydraulic) Revision #3 (05/25/05) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 WHITEMAN WM-120P/S HYDRAULIC MIXER — PARTS & OPERATION MANUAL — REV.
TABLE OF CONTENTS Here's How To Get Help ........................................... 3 Table Of Contents .................................................... 4 Parts Ordering Procedures ...................................... 5 Operation and Safety Decals ................................... 6 Rules For Safe Operation ..................................... 7-8 Specifications ........................................................... 9 General Information ...............................................
PARTS ORDERING PROCEDURES ■ ■ ■ ■ ■ ■ ■ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: • • • • UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* • • Airborne Express* Truck or parcel post *Normally shipped the same day the order
WM120P/S HYDRAULIC MIXER — OPERATION AND SAFETY DECALS Machine Safety Decals This Whiteman mixer is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. The illustration below shows these decals as they appear on the mixer. Should any of these decals become unreadable, replacements can be obtained from your dealer. SAFETY INSTRUCTIONS 1. Read owners manuals before operating. 2.
WM120P/S HYDRAULIC MIXER — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the EM-120PHD or EM-120SHD mixers: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
WM120P/S HYDRAULIC MIXER — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the WM120PHD or WM120SHD hydraulic mixers: GENERAL SAFETY ■ Stop the engine when leaving the mixer unattended. ■ Block the unit when leaving or when using on a slope.
WM120P/S HYDRAULIC MIXER — SPECIFICATIONS Table 1. WM120P/S Hydraulic Series Mixers WM120PHD (Poly) WM120SHD (Steel) Capacity - cu. ft (liters) 12 (340) 12 (340) Bag capacity - bags 3.5 to 4 3.5 to 4 Weight - lbs (kg.) 1,010 (458) 1,010 (458) Length w/Tow Bar x W x H - in. (cm.) 82 x 51 x 60 (208 x 130 x 152) 82 x 51 x 60 (208 x 130 x 152) Height W/Dump Handle - in (cm.) 75 (191) 75 (191) Discharge Height - in (cm.
WM120P/S HYDRAULIC MIXER — GENERAL INFORMATION GENERAL GASOLINE ENGINE CARE The Whiteman series WM-120PHD and WM120SHD plaster and mortar hydraulic mixers are shipped completely assembled and have been factory tested. For care and operation of the gasoline engine, refer to the engine manufacturer’s operating instructions furnished with the engine. We recommend draining and refilling the engine crankcase at least every thirty hours of operation. Check the engine oil level daily.
WM-120P/S HYDRAULIC MIXER — CONTROLS Figure 1. Mixer Safety Grill — Provided for operator safety. This safety grill is designed to keep hands and solid objects out of the mixing drum when in use. This grill should be closed at all times when mixer is in use. DO NOT remove the grill or grill opening bar. Keep the grill clean by washing it down daily. Mixing Drum — Made of either polyethylene or steel. Mixing materials such as concrete, mortar, plaster are to be placed into this drum for mixing.
WM-120P/S HYDRAULIC MIXER — ELECTRIC MOTOR ELECTRIC MOTOR For lubrication care and operation of the electric motor, refer to your electric motor instruction booklet furnished with the motor. Protect the electric motor from dust as much as possible and keep ventilating openings clean. CAUTION: ■ DO NOT spray water at any time on the electric motor. ■ DO NOT operate electric motor in a explosive environment.
WM-120P/S HYDRAULIC MIXER — TOWING STEP 3 NOTE Before towing, check with local and state laws for proper compliance. The tow bar and chain must be properly attached to the mixer and towing vehicle prior to towing. Refer to the following installation instruction: VEHICLE CONNECTOR LINK DRAW BAR REMOVE EXCESS CHAIN (SLACK) BOTTOM CONNECTOR LINK Step 1. Insert the Draw Bar into the main frame. Secure, utilizing the 3/4" bolt (grade 5) and nylock nut. Tighten to 100 foot pounds.
WM-120P/S HYDRAULIC MIXER — PADDLE BLADE ADJUSTMENT Paddle blade adjustment is dependent on drum type, polyethylene or steel. Figure 3 illustrates the paddle blade adjustment when using a polyethylene drum. Figure 4 illustrates the paddle blade adjustment when using a steel drum. When using a polyethylene drum the paddle blade should come as close as possible to the drum end and side walls without making contact.
WM-120P/S HYDRAULIC MIXER — PADDLE BLADE ADJUSTMENT Figure 4. Paddle Blade Adjustment, Steel Drum WHITEMAN WM-120P/S HYDRAULIC MIXER — PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — INITIAL START-UP This section is intended to assist the operator with the initial start-up of the Whiteman WM-120P/S hydraulic mixer. It is extremely important that this section be read carefully before attempting to use the mixer in the field. DO NOT use your mixer until this section is thoroughly understood. STARTING THE ENGINE (gasoline only) The following steps outline the procedure for starting the engine.
WM-120P/S HYDRAULIC MIXER — INITIAL START-UP 4. Turn the engine switch (Figure 9) to the ON position. MIXING 1. The paddle shaft inside the drum should be rotating at this time. 2. Lift the mixing bag compound onto the steel grate over the bag cutter and let the contents fall into the drum. 3. Add water, and mix compound to desired consistency, then dump. NOTE Be sure to stand clear of the dump handle when the mixer is operational.
WM-120P/S HYDRAULIC MIXER — MAINTENANCE WHEEL BEARINGS PADDLE SHAFT BEARINGS After every 3 months of operation, remove the hub dust cap and inspect the wheel bearings. Once a year, or when required, disassemble the wheel hubs remove the old grease and repack the bearings forcing grease between rollers, cone and cage with a good grade of high speed wheel bearing grease (never use grease heavier than 265 A.S.T.M. penetration (“No. 2.
WM-120P/S HYDRAULIC MIXER — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 3) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service TABLE 3.
WM-120P/S HYDRAULIC MIXER — TROUBLESHOOTING (ENGINE/MIXER) TABLE 3. ENGINE TROUBLESHOOTING (CONTINUED)) SYMPTOM Insufficient power output "compression" and overheats Burns to much fuel Exhaust color is continiously "WHITE" Exhaust color is continiously "BLACK" POSSIBLE PROBLEM SOLUTION Malfunction in cooling fan? Check or replace cooling fan. Air in-take filter clogged? Clean or replace air in-take filter. Over accumulation of exhaust products? Clean and check valves.
WM-120P/S HYDRAULIC MIXER — NOTE PAGE WHITEMAN WM-120P/S HYDRAULIC MIXER — PARTS & OPERATION MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
WM-120P/S HYDRAULIC MIXER— SUGGESTED SPARE PARTS WM-120PS 1 TO 3 UNITS WM-120PS 5 TO 10 UNITS Qty. P/N Description 6 ............ 491010 ............ RUBBER LATCH ASSY. 1 ............ EM200293 ...... PADDLE ARM TOW SIDE 1 ............ EM200294 ...... PADDLE ARM CENTER TOW SIDE 1 ............ EM200295 ...... PADDLE ARM CENTER ENGINE SIDE 1 ............ EM200296 ...... PADDLE ARM ENGINE SIDE 3 ............ EM200863 ...... RUBBER BLADE KIT (STEEL DRUM) 3 ............ EM204625 ......
WM-120P/S HYDRAULIC MIXER — NAME PLATE AND DECALS NAME PLATE AND DECALS PAGE 24 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — NAME PLATE AND DECALS NAME PLATE AND DECALS NO PART NO 1 2 3 4 5 6 7 * * * * * * EM948423 EM948501 TBD DCL151 13238 511764 DCLWM120PS PART NAME DECAL : CAUTION DECAL : SAFETY INSTRUCTIONS PLATE, SERIAL NO. DECAL : MQ WHITEMAN DECAL : INSPECT TOWING DECAL : DUMP CONTROL DECAL : DRIVE CONTROL KIT, DECAL QTY. 2 1 1 1 2 1 1 1 REMARKS CONTACT MQ SERVICE DEPT. W/MODEL & S/N INCLUDES ITEMS W/ * SEE DECAL ILLUSTRATIONS ON PAGE 6.
WM-120P/S HYDRAULIC MIXER — ENGINE END PADDLE ASSY. ENGINE END PADDLE ASSY. USED IN POLYETHYLENE AND STEEL DRUMS PAGE 26 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
wM-120P/S HYDRAULIC MIXER — ENGINE END PADDLE ASSY. ENGINE END PADDLE ASSY.
WM-120P/S HYDRAULIC MIXER — TOW END PADDLE ASSY. TOW END PADDLE ASSY. USED IN POLYETHYLENE AND STEEL DRUMS PAGE 28 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — TOW END PADDLE ASSY. TOW END PADDLE ASSY.
WM-120P/S HYDRAULIC MIXER — PLASTIC MIXING DRUM ASSY. PLASTIC MIXING DRUM ASSY. PAGE 30 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — PLASTIC MIXING DRUM ASSY. PLASTIC MIXING DRUM ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 3309 1023 3308 10133 1665 1284 3006 3291 507719 3278 1284 10136 13209 1162A 2621 10024 0447 3242 10176 13228 3327 3413 3313 7170 8151 0205 3485 3382 2219 3249 13218 3500 3512 3101 3042 MOVEABLE GRATE 1 SCREW, HHCS 3/8-16 X 1-1/4 1 STATIONARY GRATE 1 LOCK NUT 3/8-16 18 SCREW, HHCS 3/8-16 X 2 ...................
WM-120P/S HYDRAULIC MIXER — STEEL MIXING DRUM ASSY. STEEL MIXING DRUM ASSY. PAGE 32 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — STEEL MIXING DRUM ASSY. STEEL MIXING DRUM ASSY.
WM-120P/S HYD. MIXER — PLASTIC/STEEL PADDLE SHAFT ASSY. PLASTIC/STEEL PADDLE SHAFT ASSY. PAGE 34 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYD. MIXER — PLASTIC/STEEL PADDLE SHAFT ASSY. PLASTIC/STEEL PADDLE SHAFT ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 16 3061 3494 3019 3024 13002 3131 EM902153 3347 13108 13156 3215 3047 8164 5028B 13282 13257 13156 3530 SPACER 14 OUTER SEAL 2 INNER SEAL 4 SPRING 2 BEARING SEAL 2 O-RING 2 BALL BEARING 2 SPECIAL NUT 1 SPACER 1 COUPLER 1 HHCS 1/2-13 X 3.1/2" 1 SPACER 1 CASTLE NUT 1-20 1 COTTER PIN 1 PADDLE SHAFT (PLASTIC) ................................... 1 ....
WM-120P/S HYDRAULIC MIXER — HYDRAULIC ASSY. HYDRAULIC ASSY. PAGE 36 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — HYDRAULIC ASSY. HYDRAULIC ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 PART NO 3323 3365 13243 3231 3242 10133 3327 0131A 0181B 3353 3369 10136 13198 13153 13196 3367 3462 0857 8051 8163 3461 3333 13219 13220 13210 13213 13147 3336 3215 13156 3322 1284 0166A 3316 13217 10176 3321 3314 13244 13216 510263 13225 13226 13212 3407 10477 PART NAME QTY.
WM-120P/S HYDRAULIC MIXER — COOLING FAN ASSY. COOLING FAN ASSY. USED ON ALL MACHINES UP TO S/N II27769 PAGE 38 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — COOLING FAN ASSY. COOLING FAN ASSY. USED ON ALL MACHINES UP TO S/N II27769 NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART NO 0131A 13251 11139 11150 13242 1578 1665 8151 13239 13248 13245 13249 13247 13246 10024 13256 13255 5065B 2203 10133 10284 13240 0655 0161C 0300B 13237 PART NAME HHCS 1/4-20 X 3/4" HHCS 1/4-20 X 3.
WM-120P/S HYDRAULIC MIXER — FRAME 1 ASSY. FRAME 1 ASSY. 4 LUG HUB AND WHEEL (1-1/16 AXLE SPINDLE) S/N KA26943 T0 HD27963 PAGE 40 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — FRAME 1 ASSY. FRAME 1 ASSY. 4 LUG HUB AND WHEEL (1-1/16 AXLE SPINDLE) S/N KA26943 T0 HD27963. NO PART NO PART NAME 1 2 3 3 4 5 6 7 8 9 10 11 12 13 14 15 15 15 16 17 18 19 20 21 22 23 24 25 26 27 28 13212 8115 13120 13365 10133 0447 10176 511493 1023 13280 3102 3469 3148 3028 3215 HLC-1 HPC-1 HBC-1 3400 5218 3043 3076 3018 3005 3068 0183 8151 3496 3067 3065 3504 GROMMET ............................................................. 1 .... WITH DUMP (HYDRAULIC DUMP CYL.
WM-120P/S HYDRAULIC MIXER — FRAME 2 ASSY. FRAME 2 ASSY. 5 LUG HUB AND WHEEL (1-1/16 AXLE SPINDLE) S/N HD27964 T0 GE210000. PAGE 42 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — FRAME 2 ASSY. FRAME 2 ASSY. 5 LUG HUB AND WHEEL (1-1/16 AXLE SPINDLE) S/N HD27964 T0 GE210000. NO PART NO PART NAME 1 3 3 4 5 6 7 8 9 10 12 13 14 15 15 15 16 17 18 19 20 21 13212 13120 13365 10133 0447 10176 511493 1023 13280 3102 3148 3028 3215 HLC-1 HPC-1 HBC-1 13382 5218 3043 3076 3018 19045 GROMMET ............................................................. 1 .... WITH DUMP (HYDRAULIC DUMP CYL.) MAIN FRAME .......................................................... 1 ..
WM-120P/S HYDRAULIC MIXER — FRAME 3 ASSY. FRAME 3 ASSY. 5 LUG HUB AND WHEEL (1-1/16 AXLE SPINDLE) S/N GE21000 - PAGE 44 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — FRAME 3 ASSY. FRAME 3 ASSY. 5 LUG HUB AND WHEEL (1-1/16 AXLE SPINDLE) S/N GE21000 NO PART NO PART NAME 1 2 3 3 4 5 6 7 8 9 10 11 12 13 14 15 15 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 13212 EM941280 13120 13365 10133 0447 10176 511493 1023 13280 3102 EM941278 3148 3028 3215 HLC-1 HPC-1 HBC-1 511699 5218 3043 3076 3018 19045 EM968302 0183 EM923161 EM903168 EM903169 EM914324 EM941277 EM903113 EM903012 GROMMET ...........................................................
WM-120P/S HYDRAULIC MIXER — PLASTIC ENGINE COVER ASSY. PLASTIC ENGINE COVER ASSY. S/N KA26943 TO GE 210000 PAGE 46 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — PLASTIC ENGINE COVER ASSY. PLASTIC ENGINE COVER ASSY. S/N KA26943 TO GE 210000 NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 13221 3089 8151 0183 3163 3162 10024 3164 0948 929025 5117 8167 0131A 3401 13287 1307 2203 ENGINE COVER ASSY. - PLASTIC ONLY .......... 1 .................
WM-120P/S HYDRAULIC MIXER — STEEL ENGINE COVER ASSY. STEEL ENGINE COVER ASSY. GE 210001 AND ABOVE PAGE 48 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — STEEL ENGINE COVER ASSY. STEEL ENGINE COVER ASSY. GE 210001 AND ABOVE NO PART NO PART NAME 1 2 3 4 5 6 511580 509726 491010 1284 4001 10133 ENGINE COVER-STEEL ............................................ 1 .......... S/N GE210001 AND ABOVE LATCH PIN ASSY. 2 RUBBER LATCH ASSY. 2 SCREW, HHCS 3/8-16 X 1.1/2” 4 FLAT WASHER 3/8” 8 LOCK NUT 3/8-16 4 QTY. REMARKS WHITEMAN WM-120P/S HYDRAULIC MIXER — PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — ENGINE ASSY. ENGINE ASSY. PAGE 50 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
WM-120P/S HYDRAULIC MIXER — ENGINE ASSY. ENGINE ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 11 12 13 14 15 16 17 PART NO GX390K1QX2 3396 10133 1475 1665 10136 0310 0622C 3325 2126 3324 13374 3419 3418 3420 0166A 1023 13315 18 19 20 21 300B 0161C 2299 EM203149 PART NAME QTY. REMARK HONDA ENGINE 13 HP 1 KILL BUTTON 1 LOCK NUT 3/8-16 4 WIRE CONNECTOR 1 HHCS 3/8-16 X 2" 4 FLAT WASHER 3/8" 4 SQ. KEY 1/4 X 1/4 X 1.1/2" 1 SHSS 5/16-18 X 1/2" ....................................................... 2 .....
φ- 5 HP ELECTRIC MOTOR ASSY. WM-120P/S HYDRAULIC MIXER — 1φ SINGLE PHASE, 5 HP ELECTRIC MOTOR ASSY. PAGE 52 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
φ- 5 HP ELECTRIC MOTOR ASSY. WM-120P/S HYDRAULIC MIXER — 1φ SINGLE PHASE, 5 HP ELECTRIC MOTOR ASSY. NO 1 2 3 4 5 6 7 8 9 * 10 11 12 13 14 15 16 17 17 18 19 20 21 22 23 PART NO 3414 1023 0166A 0205 13291 8133 0310 0622C EM98187 940198 13292 3421 3418 3420 3416 5054A 2691 3415 13375 2203 10019 8156 10136 1665 10133 PART NAME QTY.
φ- 5 HP ELECTRIC MOTOR ASSY. WM-120P/S HYDRAULIC MIXER — 3φ THREE PHASE, 5 HP ELECTRIC MOTOR ASSY. PAGE 54 — WHITEMAN WM-120P/S HYDRAULIC MIXER— PARTS & OPERATION MANUAL — REV.
φ- 5 HP ELECTRIC MOTOR ASSY. WM-120P/S HYDRAULIC MIXER — 3φ THREE PHASE, 5 HP ELECTRIC MOTOR ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 3481 1023 0166A 0205 13291 8133 0310 0622C EM98191 940198 13289 3421 3418 3420 3416 5054A 2691 3415 13375 2203 10019 5 HP ELECTRIC MOTOR (THREE PHASE) 1 SCREW, HHCS 3/8-16 X 1-1/4 2 LOCK WASHER 3/8 4 SCREW, HHCS 3/8-16 X 1 2 SWITCH MOUNTING PLATE 1 SCREW, RHMS 8-32 X 3/4 3 SQUARE KEY 1/4 X 1/4 X 1-1/2 1 SCREW, 5/16 -18 X 1/2 .........................................
TERMS AND CONDITIONS OF SALE — PARTS Effective: July 1, 2000 PAYMENT TERMS 4. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. Freight is at the sender’s expense.
NOTE PAGE WHITEMAN WM-120P/S HYDRAULIC MIXER — PARTS & OPERATION MANUAL — REV.
PARTS AND OPERATION MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 ^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 MULTIQUIP INC.
