OPERATION AND PARTS MANUAL SP2 StreetPro SERIES MODEL SP2S13H20A SELF-PROPELLED PROFESSIONAL PAVEMENT SAW (HONDA GX390K1QWT2 GASOLINE ENGINE) Revision #1 (05/17/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis.
TABLE OF CONTENTS SP2S13H20A StreetPro Saw Honda Gx390k1qwt2 Engine Proposition 65 Warning ........................................... 2 Silicosis/Respiratory Warnings ................................ 3 Table Of Contents ................................................... 4 Parts Ordering Procedures ..................................... 5 Specifications .......................................................... 6 Dimensions .............................................................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! N View Parts Diagrams N Order Parts N Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SPECIFICATIONS Table 1. Specifications Model SP2S13H20A Blade Capacity in. (mm) 20 in. (508 mm) Cutting Depth in. (mm) 7.5 in. (191 mm) Front Wheels in. (mm) 5 in. Dia x 2 in. Wide (127 mm x 51 mm) Rear Wheels in. (mm) 8 in. Dia x 2 in. Wide (203 mm x 51 mm) Weight lbs. (kg) 280 lbs. (127 kg) Honda 13 HP Engine GX390K1QWT2 Gasoline Engine Table 2. Engine Specifications Engine Model Honda GX390K1QWT2 Air-cooled 4-stroke Single Cylinder OHV Engine Type Horizontal Shaft Engine Bore x Stroke 3.5 in. x 2.5 in.
DIMENSIONS Figure 1. SP2S13H20A Dimensions TABLE 3. DIMENSIONS REFERENCE LETTER DESCRIPTION DIMENSIONS IN. (MM) A Max Height (Handle Bars fully lowered & Front Pointer raised) 36 in. (914 mm.) B Max Handle Bar Height (fully raised) 40 in. (1016 mm.) C Max Length (Handle Bars & Front Pointer fully raised) 43 in. (1092 mm.) D Max Length (Handle Bars fully raised & Front Pointer lowered) 68 in. (1727 mm.) E Max Handle Bar Width 24 in. (610 mm.) F Max Width G Rear Wheel Base 16 in.
SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and NOTE efficient operation of the SP2S13H20A Saws.
SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the ON/OFF switch in the OFF position, remove key and/or disconnect the spark plug lead before servicing the engine or equipment. Ground the lead to prevent sparks that could ignite a fire. Over Speed Conditions ALWAYS wear approved respiratory protection. Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor or settings.
RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION CAUTI CAUTION Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the SP2S13H20A Saw. SAFETY DO NOT operate or service this equipment before reading this entire manual.
RULES FOR SAFE OPERATION General Safety ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment. ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. NEVER leave the machine unattended while running. Block the unit when leaving or when using on a slope. ALWAYS check to make sure that the operating area is clear before starting the engine.
RULES FOR SAFE OPERATION Maintenance Safety NEVER lubricate components or attempt service on a running machine. ALWAYS allow the machine a proper amount of time to cool before servicing. Keep the machinery in proper running condition. Fix damage to the machine immediately and ALWAYS replace broken parts. Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters. DO NOT use food or plastic containers to dispose of hazardous waste.
NOTES SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
MAJOR COMPONENTS Figure 3. SP2S13H20A Saw Major Components 6. Water ON/OFF Valve – ON position opens valve and permits water to flow from source through saw water hose. OFF position closes valve and halts the flow of water. 7. Hydraulic Drive Transmission - Controls the saw's forward and reverse movement by using the forward/ reverse speed lever. 8. Forward/Reverse Speed Lever – Controls forward and reverse speeds for self-propelled operation. Provides positive neutral for engine start.
ON 13HP HON ONDA ENGINE COMPONENTS INITIAL SERVICING Figure 4. Engine Controls and Components (Honda GX390K1QWT2) The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.
GENERAL INFORMATION Familiarization Water System The SP2S13H20A saw is designed for wet or dry cutting of concrete or asphalt utilizing diamond blades. They have been engineered for general, industrial and high production flat cutting applications.The reinforced steel box frame design adds strength necessary to reduce vibrations while cutting. Minimizing vibrations enhances the performance of the blade and extends the life of the saw.
NOTES SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
INSPECTION Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the saw, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. 4. Check carburetor for external dirt and dust. Clean with dry compressed air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4.
INSPECTION Hydrostatic Transmission An EATON® Model 7 hydrostatic transmission (Figure 8) provides the power for the saw's propulsion system. The transmission drives a sprocket that directly connects the spline drive to the rear wheels. The no load forward/reverse speeds are approximately 80 ft/min. Battery - The 12-volt DC battery (Figure 10) is shipped dry, and will require a proper electrolyte level for operation. Figure 10.
INSPECTION -BLADE WARNING 4. Directional Arrow – Check to ensure that the blade is oriented properly on the blade shaft for sawing. Reference the directional arrow in the blade and place it so the direction of rotation “downcuts” with the turn of the shaft. 5. Diamond Segment or Rim – Ensure there are no cracks, dings, or missing portions of the diamond segment/rim. DO NOT use a blade that is missing a segment or a portion of the rim.
INSPECTION - BLADE PLACEMENT NOTE The following steps should be accomplished before placing the diamond blade on the blade shaft. ■ Set the engine ON/OFF switch to the OFF position. ■ Raise the saw to a high position by cranking the Raise/Lower handle in a counterclockwise direction. 3. Blade Nut – Remove the blade nut (4). For reassembly, DO NOT over tighten the blade nut against the outer flange. Tighten blade nut approximately 45-50 ft-lbs/62-69 N/m. 4.
INSPECTION -GUARDS, COVERS & BELTS Guards and Covers Check WARNING V-Belts and Covers D NEVER operate the saw without blade guards and covers (Figures 13, 14 and 15) in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operations. Adhere to the safety guidelines of the American National standards Institute (ANSI) B7.1 and B7.5. CAUTI CAUTION D NEVER attempt to check the V-belt with the engine running because severe injury can occur.
INSPECTION - BELTS & WATER TANK 3. Check V-belt tension (Figure 17) by using a tensionmeter (6.0 - 9.0 lbs.) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/8” (10 mm) - 1/2” (13 mm). Water Tank The SP2S13H20A Saw is equipped with a removable 5-gallon on-board water tank fitted in the top of the console which can be connected to the brass hose fitting on the rear of the operators console (Figure 18).
MANUAL START-UP CAUTI CAUTION D NOTE DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections have been read and understood. Depending on engine manufacturer, operating steps may vary. See engine operating manual. The following start-up procedure makes reference to a HONDA 13 HP Engine (Manual Start) WARNING The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine.
MANUAL START-UP 7. Place the throttle lever (Figure 23) halfway between FAST and SLOW for starting. All sawing is done at full throttle. The engine governor speed is factory set to ensure optimum blade operating speeds. 9. If the engine has started, slowly return the choke lever (Figure 22) to the CLOSED position. If the engine has not started repeat steps 1 through 8. 10. Before the saw is placed into operation, run the engine for several minutes.
SHUT-DOWN PROCEDURES Stopping the Engine (13 HP Honda Engine) WARNING Emergency Stop Procedure 1. Turn the console engine ON/OFF switch (Figure 31) to the OFF position. NEVER stop the engine while the blade is in the cut, except for extreme emergencies. A sudden stoppage of the engine at high speed while in a cut could damage the blade and/or saw, and may cause injury to the user or other in the operating area. 1. Place the forward/reverse speed lever in the NEUTRAL position (Self propelled models only).
NOTES SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
OPERATION CAUTI CAUTION NEVER stop the engine while cutting at high speeds, except for extreme emergencies. This can damage your SP2S13H20A Saw. Adjusting the Blade Height The SP2S13H20A saw uses a manual raise/lower crank handle located on the console with clockwise rotation providing lowering action, and counter-clockwise rotation providing raising and lowering action (Figure 37). Adjusting the Handle Bars To adjust the blade height: The SP2S13H20A has adjustable height handle bars.
OPERATION CAUTI CAUTION DO NOT force the blade into the cut any faster than its designed tendency is effective cut and remove material. This can damage your blade and/or your machine. 3. Move the travel lever towards the FORWARD position to increase forward travel speed during cutting (Figure 40). Placing the travel lever fully forward will move the saw at maximum speed.
OPERATION Cutting WARNING The operator MUST wear the appropriate protective equipment and clothing while engaged in sawing. Failure to do so can result in SERIOUS INJURY. DANGER DO NOT operate this machine without the Blade Guard or V-belt Guards in place.While the blade is spinning, DO NOT place hands, feet, or other body parts near the blade to avoid SERIOUS INJURY or DEATH. When cutting, determine the required cutting depth and use an appropriately sized blade.
OPERATION Finishing A Cut Diamond Blades 1. Raise the blade out of the cut by cranking the Raise/Lower handle COUNTER-CLOCKWISE (Figure 37). Raise the blade high enough out of the cut to clear the surface and allow the saw to be maneuvered. Diamond blade sawing consists of cutting WET (using water to cool the blade) or DRY (using the circulating air to cool the blade). Selecting the diamond blade TYPE and GRADE defines how the blade will perform both in cutting speed and blade life.
MAINTENANCE Maintenance Engine air filter: Clean air filter 2 to 3 times daily when DRY cutting. See Engine Owner’s Manual for detailed information. WARNING General maintenance practices are crucial to the performance and longevity of your saw. The extreme environments of sawing operations require routine cleaning, lubrication, belt tensioning, and inspection for wear and damage The following procedures devoted to maintenance can prevent serious saw damage or malfunctioning.
MAINTENANCE General Transmission Care All SP2S13H20A model saws utilize spline gear wheel design coupled with an EATON Model 7 Hydrostatic Transmission that provides forward/reverse propulsion. The simple design of the system keeps maintenance to a minimum. Transmission Reservoir Cup: Check every 8 hours of operation. When the transmission is cold (A), check oil level against the level indicator (see Figure 45). Spline Gear Wheels: Check every 25 hours and clean as necessary.
MAINTENANCE Drive V-Belt Check Adjust V-Belt Alignment/Replacement Pulleys The V-Belts of the SP2S13H20A saw have been factory set utilizing precision standards. Operating the saw with less than the specified number of V-belts (See Table 5), or belts that are slipping or are over-tensioned will significantly diminish the performance of the saw, and may cause damage to the blade. The V-belts and their respective pulleys have been professionally aligned at the factory.
MAINTENANCE Blade Shaft Bearing Replacement Reference Figure 50 & Figure 51 for steps 4-9 The SP2S13H20A saw is supported by “tapped base lock collar (w/set screw)" self-aligning Blade Shaft Bearings (Figures 51 and 52). These heavy duty bearings support the 1-1/4 blade shaft, and have grease (zerk) points conveniently located for service. 1. It is recommended to replace both left & right bearings at the same time. 4.
MAINTENANCE Battery Maintenance Mishandling of the battery shortens the service life of the battery and adds to maintenance cost. When handling the battery do the following: Be careful not to let the battery electrolyte come in contact with your body or clothing. Always wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing. Always check the battery terminals periodically to ensure that they are in good condition.
13HP ENGINE WIRING DIAGRAM (RECOIL START) Figure 52. 13HP Honda Engine Wiring Diagram SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 7) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 7.
TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTON "Weak in power" compression is proper and does not misfire. POSSIBLE CAUSE SOLUTION Air cleaner not clean? Clean or replace air cleaner Improper level in carburetor? Check float adjustment, re-build carbureator. Defective Spark plug? Clean or replace spark plug. Defective Spark plug? "Weak in power" compression is proper but misfires. Engine overheats. Rotational speed fluctuates. Recoil star ter malfunction.
TROUBLESHOOTING (BLADE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Blade Troubleshooting (Table 8) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
NOTES SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS SP2S13H20A SAW (13HP SELF-PROPELLED) 1 to 3 Units Qty. ..... P/N .................... Description 3 .......... 16052 ................ V-BELTS, DRIVE 1 .......... 07055-051 ......... V-BELTS, TRANSMISSION 1 .......... 29013-001 ......... WRENCH, BOX END 1-1/2 IN. 1 .......... 60087 ................ ROPE, FRONT POINTER 1/4 IN. 2 .......... 15081 ................ GRIPS, HANDLE BAR 1 IN. 1 .......... 06922-003 ......... BLADE SHAFT NUT, RIGHT SIDE 1 .......... 07038-016 .........
NAME PLATE AND DECALS NAME PLATE AND DECALS. PAGE 44 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
NAME PLATE AND DECALS NAME PLATE AND DECALS NO PART NO PART NAME QTY. REMARKS 1 38213 DECAL, MULTIQUIP 4 2 23596-001 DECAL, RECOMMENDED MAINTENANCE 1 3 38224 DECAL, SP2S13H20A 2 4 NAMEPLATE ................................................................... 1 ......... CONTACT MQ PARTS DEPT. 5 28853-001 DECAL, FORWARD/REVERSE LEVER 1 6 20525 DECAL, PROP.
UNDER CARRIAGE ASSY. UNDER CARRIAGE ASSY. 1 2 4 6 13 6 14 9 8 7 10 10 11 12 3 6 6 5 8 PAGE 46 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
UNDER CARRIAGE ASSY. UNDERCARRIAGE ASSY. NO PART NO 1 28777-352 2 28781-002 3 28782-351 4 28086-001 5 28085-001 6 8151 7 10065-090 8 25181-001 9 8081 10 0447 11 3216 12 0685 13 2621 14 1162 A PART NAME FRAME ASSY. 16”/18”/20” AXLE, REAR & FRONT FRAME, UNDERCARRIAGEE ASSY. WHEEL, 8 X 2 .75 ROLLER BEARING REAR WHEEL, 5 X 2 .75 ROLLER BEARING FRONT WASHER, FLAT SAE 3/4 BEARING PLAIN COLLAR, SET 0.75 X 1.50 X .
BLADE SHAFT ASSY. BLADE SHAFT ASSY. 8 9 10 7 4 3 1 20 5 2 16 15 2 1 11 6 17 LUBRICATION POINT 15 13 18 12 16 LUBRICATION POINT 14 19 NOTES: 1 ENGINE PULLEY, SEE ENGINE ASSY. PAGE 48 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
BLADE SHAFT ASSY. BLADE SHAFT ASSY. NO PART NO 1 28807-002 2 28081-001 3 28811-002 4 26928-002 26928-004 5 0125 6 6059 B 7 06922-003 8 06502-012 9 2955 10 0448 11 25172-003 12 1528 13 28841-001 14 0424 15 2621 16 1162 A 17 16052 18 23250-002 19 07038-016 20 15046 PART NAME QTY. SPINDLE, BLADE 1 BEARING, PILLOW BLOCK 1.25ID AS206-20 2 FLANGE, BLADE INSIDE 4.0OD X 1.0ID 1 FLANGE, BLADE OUTSIDE 1.0ID X5.0OD X 56 1 FLANGE, BLADE OUTSIDE 1.0ID X4.0OD X 56 1 KEY, WOODRUFF #15 1 KEY, 1/4”SQ.
LIFTING BALE ASSY. LIFTING BALE ASSY. PAGE 50 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
LIFTING BALE ASSY. LIFTING BALE ASSY. NO PART NO 1 28890-351 1 28890-352 2 28893-001 2 28893-002 3 0205 4 10133 5 10136 6 5283 7 0300 B 8 0202 PART NAME 13HP, LIFT BALE ASSY. 20HP, LIFT BAIL ASSY. BRACE, 13HP BAIL BRACE, 20HP BAIL SCREW, HHC 3/8-16 X 1.0 NUT, NYLOC 3/8-16 WASHER, FLAT SAE 3/8 NUT, NYLOC 5/16-18 WASHER, FLAT SAE 5/16 SCREW, HHC 5/16-18 X 1 ZINC QTY. 1 1 1 1 2 2 4 2 4 2 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
CONSOLE ASSY. CONSOLE ASSY. PAGE 52 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
CONSOLE ASSY. CONSOLE ASSY. NO PART NO 1 28796-351 2 15081 3 4196 4 0166 A 5 10136 6 28091-401 8 28834-001 9 0131 A 10 1002 4 11 4001 12 1579 13 0181 B 14 28791-751 15 28805-701 16 29013-001 17 0948 18 0205 19 0166 A PART NAME HANDLE ASSY. GRIP, 1” ID SCREW, HHC 3/8-16 X .75 WASHER, LOCK 3/8 MED. WASHER, FLAT SAE 3/8 SHIFT CONTROL ASSY. COVER, REAR SCREW, HHC 1/4-20 X 3/4 NUT, NYLOC 1/4-20 WASHER, FLAT USS 3/8 PLD SCREW, HHC 1/4-20 X 1/2 WASHER, LOCK 1/4 MED. HOUSING ASSY.
13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. PAGE 54 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. NO 1 2 3 4 5 6 7 8 9 PART NO 15868-032 0447 968011 10176 3214 9154 10136 10133 28804-351 PART NAME SCREW, SQHS 1/2-13 X 4, CUP PLAIN WASHER, FLAT SAE 1/2 NUT, HEX FINISH 1/2-13 NUT, NYLOC 1/2-13 SCREW, HHC 1/2-13 X 1 1/4 SCREW, HHC 3/8-16 X 1 3/4 WASHER, FLAT SAE 3/8 NUT, NYLOC 3/8-16 ENGINE BASE ASSY. QTY. 1 9 1 4 4 4 8 4 1 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
ENGINE ASSY. ENGINE ASSY. 1 2 2 3 2 2 1 1 NOTES: 1 SEE BLADE SHAFT ASSY. 2 SEE HYDROSTATIC DRIVE ASSY. PAGE 56 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
ENGINE ASSY. ENGINE ASSY. NO PART NO 1 15103 2 23703-003 3 6059 B PART NAME ENGINE, HONDA 13HP, GX390K1QWT2 PULLEY, ENGINE 13 HP, 4F3V26X1 KEY 1/4" SQ. X 2, 1018 STOCK QTY. 1 1 1 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
POINTERS AND COVERS ASSY. POINTERS AND COVERS ASSY. PAGE 58 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
POINTERS AND COVERS ASSY. POINTER AND COVERS ASSY. NO PART NO PART NAME 1 28646-351 BLADE GUIDE WELDMENT 2 28649-001 SPANNER BUSHING CSI 3 28648-001 WHEEL, 3.00 X 1.25 .50 ID POLY CSI 4 28647-001 POINTER 5 1456 NUT, HEX FINISH 3/8-16 6 10133 NUT, NYLOC 3/8-16 7 15114 SLEEVE, SASH 8 60087 ROPE, 1/4” NYLON, BRAIDED, WHITE 9 0655 SCREW, HHC 5/16-18 X 3/4 10 0161 C WASHER, LOCK 5/16 MED. 11 0300 B WASHER, FLAT SAE 5/16 12 10136 WASHER, FLAT SAE 3/8 13 0166 A WASHER, LOCK 3/8 MED. 14 0205 SCREW, HHC 3/8-16 X 1.
WATER SYSTEM ASSY. WATER SYSTEM ASSY. PAGE 60 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
WATER SYSTEM ASSY. WATER SYSTEM ASSY. NO PART NO 1 12694-008 2 23255-004 3 23566-001 4 23259-001 5 23254-001 6 16378-009 7 15544 8 24778-001 9 1662 10 28861-501 11 28089-001 12 27040-001 13 28861-001 14 28860-001 15 06499-004 16 28089-002 * PART NAME QTY. REMARKS HOSE CLAMP, SPRING TYPE 7/8 O.D HOSE 4 HOSE, WATER 1/2 X 37 1 FITTING, PLASTIC 90 1/2MP X 1/2BARB 1 VALVE, BALL 1/2 MPT BRASS NIBCO T585-70 1 FITTING, NIPPLE 1/2MP X 2 GALV. 1 U-BOLT W/NUTS 1 FITTING, BRASS 1/2FP-3/4F GRDN.
BLADE GUARD ASSY. BLADE GUARD ASSY. PAGE 62 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
BLADE GUARD ASSY. BLADE GUARD ASSY. NO PART NO 1 29406-754 2 28729-002 3 60021 4 0131 A 5 10024 6 24642-001 7 12694-006 8 24778-001 9 18626-001 10 22129-001 11 21168 12 0424 13 0949 14 0181 B 15 0948 17 0166 A 18 10136 PART NAME BLADE GUARD W/A - RED GUARD, SPLASH BLADE HOSE, 3/8ID X 5/8OD BRAIDED PVC “PAC” SCREW, HHC 1/4-20 X 3/4 NUT, NYLOC 1/4-20 Y-CONNECTOR 3/8 HOSE CLAMP, SPRING TYPE 3/4 O.D. HOSE FITTING, BRASS 1/2BARB X 3/4F GRDN SPRING TENSION, GUARD BLADE PIPE STRAP 3/8 SCREW, HHC 3/8-16 X 4.
MANUAL RAISE AND LOWER ASSY. (20 IN. ) MANUAL RAISE AND LOWER ASSY. (20 IN.) 8 9 6 10 16 11 15 7 9 B 17 14 9 4 13 3 LUBRICATION POINT 1 2 12 PAGE 64 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
MANUAL RAISE AND LOWER ASSY. (20 IN. ) JACK SCREW ASSY. 20” BLADE NO PART NO PART NAME 1 28793-352 JACKPOST ASSY. 2 2621 ZERK, GREASE STR. 1/4-28 3 28806-001 JACKSCREW 4 28083-001 BEARING, FLANGE 5 28809-001 SPACER, JACKSCREW 6 4568 PIN, ROLL 3/16 X 1 7 28877-751 SCREW COVER ASSY., RED 8 1579 SCREW, HHC 1/4-20 X 1/2 9 0948 WASHER, FLAT SAE 1/4 10 0181 B WASHER, LOCK 1/4 MED.
BATTERY ASSY. BATTERY ASSY. PAGE 66 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
BATTERY ASSY. BATTERY ASSY. NO PART NO 1 4671 2 28096-001 3 28095-401 4 28093-001 5 28094-001 6 0131 A 7 0948 8 0949 9 0655 10 0161 D 11 0161 C 12 0300 B 13 0181 B PART NAME QTY. BATTERY, WET GR.U1, GT-X GOLD LA 1 BRACKET BATTERY 1 BATTERY HOLD DOWN KIT 425-405 1 CABLE, BATTERY POS 6GA X 42” RING TONGUE 1 STRAP, GROUND 1 SCREW, HHC 1/4-20 X 3/4 2 WASHER, FLAT SAE 1/4 2 NUT, HEX FINISH 1/4-20 PLATED 2 SCREW, HHC 5/16-18 X 3/4 3 NUT, HEX FINISH 5/16-18 3 WASHER, LOCK 5/16 MED.
TRANSMISSION ENGAGE LEVER ASSY. TRANSMISSION ENGAGE LEVER ASSY. PAGE 68 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
TRANSMISSION ENGAGE LEVER ASSY. HYD. TRANSMISSION ENGAGE LEVER ASSY. NO PART NO PART NAME QTY. 1 28825-351 LEVER ASSY. TRANS. ENGAGE 1 2 3360 GRIP, 1/4 X 1 BLACK 1 3 28822-351 MOUNT ASSY., LEVER RED 1 4 0655 SCREW, HHC 5/16-18 X 3/4 4 5 10136 WASHER, FLAT SAE 3/8 6 6 6014 B PIN, COTTER 3/32D X 1.
HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION 1 4 2 3 5 5 6 14 8 1 7 13 11 5 9 12 10 5 4 NOTES: 1 INCLUDED WITH ITEM 6, CONSOLE ASSY. PAGE 70 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION ASSY. NO PART NO PART NAME 1 20559-001 SPRING, EXT. 3.38FL X 71OD X .105 2 1493 SCREW, HHC 3/8-18 X 3.25 3 28836-001 LINK, RETURN SPRING 4 10133 NUT, NYLOC 3/8-16 5 10136 WASHER, FLAT SAE 3/8 6 1023 SCREW, HHC 3/8-16 X 1 1/4 GR 5 7 15354 TRANSMISSION, HYD EATON 8 1578 KEY, WOODRUFF #3 9 0166 A WASHER, LOCK 3/8 MED. 10 1456 NUT, HEX FINISH 3/8-16 11 28828-351 SHIFT ARM ASSY.
HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. 1 3 4 12 1 1 2 1 13 1 7 6 7 8 1 5 18 9 18 12 10 11 18 25 14 18 2 15 17 19 NOTES: 1 2 USE LOCTITE P/N 60091 (BLUE) 23 22 21 SEE ENGINE ASSY., REQUIRES A 4-GROOVE PULLEY, ITEM 2. PAGE 72 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. NO PART NO PART NAME QTY. REMARKS 1 23227-001 SPROCKET, TRANSMISSION 12 TOOTH MACH 1 2 25039 SCREW, SHS 10-24 X 1/4 2 3 23231-503 CHAIN, ROLLER .375 PITCH X 21.75 1 4 10504-035 LINK, CHAIN 1 5 5283 NUT, NYLOC 5/16-18 8 6 28084-001 SPROCKET, 3548 X 3/4 1 7 0126 KEY, WOODRUFF #9 3 8 28832-001 JACKSHAFT 1 9 23284-001 BEARING, FLANGE .
HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 74 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 4# 5 6 * 7# 8# 9 10 11 12 13 14 15 16 PART NO. 16271ZE2000 17210ZE3505 17218ZE3505 17219HA2405 17230ZE3841 17232891000 17238ZE2310 17239ZE3840 17410ZE3840 17470ZE3841 17475ZE3841 17476ZE3841 90142MB0000 90325044000 90009ZE2003 0405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER ........................ 1 .........
HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 76 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 PART NO. 14100ZF6W01 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .......................... 1 .........
HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 78 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 #+ * 2 * 3 * 4 * 5 * 6 + * 7 * 8 * 9 10 * 11 * 12 * 13 14 15 16 20 22 * 23 * 24 * 25 * 26 * 28 * 31$ 33 * 33 33 * 34 * 35 * PART NO.
HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 80 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA HONDA GX390K1QWT2 ENGINE —— CONTROL GX390K1QWT2 ENGINE CONTROL ASSY. ASSY. CONTROL ASSY. NO. 2 3 4 5 6 10 * 11 * 12 * 13 * 14 * 15 * 17 * 18 * 21 22 24 * 27 * 28 * 29 PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16570ZE3W20 16571ZE3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE3W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050320A 93500050160A 9405006000 PART NAME QTY.
HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 82 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. NO. 2 3 4 5 8# 9 10 + * 11 + * 12 + * 13 * 13 * 15 * 16 17 * 18 * 19 20 * 21 * PART NO. 11300ZE3602 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 16531Z0A000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 PART NAME QTY. REMARKS COVER ASSY., CRANKCASE (Q-TYPE) .........1 ................ INCLUDES ITEMS W/ * GASKET, CASE COVER 1 CAP ASSY.
HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 84 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 8 11 12 * PART NO. 13310ZF6W10 13351ZE3010 90745ZE2600 91001ZF6003 PART NAME QTY. REMARKS CRANKSHAFT (Q-TYPE) .......................... 1 ......... INCLUDES ITEM W/ * WEIGHT, BALANCER 1 KEY(6.3X6.3X43) 1 BEARING, RADIAL BALL (6207S) 1 SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 86 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 4 9 10 12 * 13 * 14 17 18 19 20 21 * 22 23 PART NO. 12000ZF6W13 15510ZE2043 16541ZE3010 90131896650 90446KE1000 91201ZE3004 91201ZE9003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 34150ZH7003 90013883000 PART NAME QTY. REMARKS CYLINDER ASSY. (ALERT) ....................... 1 ......... INCLUDES ITEMS W/ * SWITCH ASSY., OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER (8.2X17X0.
HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 88 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 16 17 18 18 PART NO. 12200ZF6W01 12204ZE2306 12205ZE2305 12216ZE2300 12251ZF6W00 12310ZE3791 12315ZE3840 12391ZE2020 17316611000 90014ZE2000 90042ZE8000 92900080320E 90441ZE2010 9430112200 957011008000 9807955846 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD .............................................1 ................ INCLUDES ITEMS W/ * GUIDE, VALVE (OS) (OPTIONAL) 1 GUIDE, EX.
HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 90 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 4 7 10 13 15 PART NO. 16731ZE2003 19610ZE3010ZB 19631ZE3W00 36100ZH7003 90013883000 PART NAME CLIP, TUBE COVER, FAN *NH1* (BLACK) SHROUD SWITCH ASSY., ENGINE STOP BOLT, FLANGE (6X12) (CT200) QTY. 1 1 1 1 6 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 92 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 3 7 10 11 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3701 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY, STARTER (SCREEN GRID) FLYWHEEL NUT, SPECIAL (16MM) (1) KEY, SPECIAL WOODRUFF (25X18) QTY. 1 1 1 1 1 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 94 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 3 6 8 9 * 15 17 18 20 22 PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZB 17620ZH7023 17631ZH7003 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER, SUPPORTER (107MM) 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* (BLACK) 1 CAP, FUEL FILLER ................................................ 1 ......... INCLUDES ITEM W/ * GASKET, FUEL FILLER CAP 1 O-RING (13.5X1.5) (ARAI) 1 NUT, FLANGE (8MM) 2 BULK HOSE, FUEL (4.
HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 96 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 8 12 17 18 PART NO. 30500ZF6W01 30700ZE1013 31512ZE2000 36101ZE2701 90015883000 90684ZA0601 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH (430MM) BOLT, FLANGE (6X28) CLIP, WIRE HARNESS QTY. 1 1 1 1 2 1 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER (1) ASSY. PAGE 98 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER (1) ASSY. NO. 2 3 5 6 7 8 9 10 19 22 27 28 31 PART NO. 18310ZE2W61 18320ZE2W61 18330ZE2W00 18331ZE3810 18333ZF6W01 18355ZE2W00 18381ZE2W10 18381ZE2800 90050ZE1000 90055ZE1000 90006ZE2000 9405008000 90055ZE1000 PART NAME QTY. MUFFLER 1 PROTECTOR, MUFFLER 1 PIPE, EX. 1 CAP, MUFFLER 1 GASKET, EX.
HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 100 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZF6003 13011ZF6003 13012ZF6003 13012ZF6005 13013ZF6003 13101ZF6W00 13102ZF6W00 13103ZF6W00 13104ZF6W00 13111ZF6W00 13200ZE3010 13200ZE3315 90001ZE8000 90601ZE3000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (OS 0.25) (OPTIONAL) 1 RING SET, PISTON (OS 0.50) (OPTIONAL) 1 RING SET, PISTON (OS 0.50) (OPTIONAL) 1 RING SET, PISTON (0.75) (NIPPON) 1 PISTON (STD) 1 PISTON (OS 0.
HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 102 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * 13 * 14 PART NO. 28400ZE3W01ZB 28410ZE3W01ZB 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZV7003 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .............. 1 ......
HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 104 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. NO. 2 4 7 9 12 13 PART NO. 87521ZF6W01 87522ZH9000 87528ZE2810 87532ZH8810 87534ZE1841 87535ZE1840 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE (EXTERNAL) MARK, OIL ALERT (E) LABEL, AIR CLEANER CAUTION MARK, AIR CLEANER SALES POINT QTY. 1 1 1 1 1 1 REMARKS SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
