User's Manual
PAGE 24 — DCA-45USI — OPERATION AND PARTS MANUAL (STD) — REV. #2 (04/22/05)
Output Terminal Familiarization
The “
Output Terminal Panel
” (Figure 7) is provided with the
following:
z
Three (3) 120/240V output receptacles, 50 amp
z
Three (3) Circuit Breakers 240V @50 amps
z
Two (2) 120V GFCI receptacles, 20 amp
z
Two (2) GFCI Circuit Breakers @ 20 amps
z
One Main Circuit Breaker @110 amps
z
Five (5) Output Terminal Lugs ( U, V, W, O, Ground)
Output Terminal Panel
The
Output Terminal Panel
(Figure 7) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
Terminal legs “O” and “Ground” are
considered
bonded grounds
.
Figure 7. Output Terminal Panel
DCA-45USI — OUTPUT TERMINAL PANEL FAMILIARIZATION
NOTE