OPERATION AND PARTS MANUAL SERIES MODEL MVH508DZ REVERSIBLE PLATE COMPACTOR (HATZ 1D81S-325 DIESEL ENGINE) Revision #0 (04/04/14) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Diesel engine exhaust and some of PAGE 2 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
NOTES MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MVH508DZ Reversible Plate Compactor Proposition 65 Warning............................................ 2 Table Of Contents..................................................... 4 Parts Ordering Procedures....................................... 5 Safety Information............................................... 6-10 Specifications......................................................... 11 Dimensions............................................................. 12 General Information.......
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! View Parts Diagrams Order Parts Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication. NEVER operate this equipment under the influence of drugs or alcohol.
SAFETY INFORMATION COMPACTOR SAFETY WARNING DANGER NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death. WARNING NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.
SAFETY INFORMATION FUEL SAFETY BATTERY SAFETY (ELECTRIC START ONLY) DANGER DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. MVH-306 DO NOT drop the battery. There is a possibility that the battery will explode. DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE When the life cycle of this equipment is over, remove battery and bring to appropriate facility for lead reclamation. Use safety precautions when handling batteries that contain sulfuric acid. When the life cycle of this equipment is over, it is recommended that the trowel frame and all other metal parts be sent to a recycling center.
SPECIFICATIONS Table 1. MVH508DZ Specifications Centrifugal Force 14613 lbf (65 kN) Vibration Frequency 4,150 vpm (70 Hz) Maximum Traveling Speed 82 ft/min (25 m/min) Plate Size (W x L) 25.59 x 35.43 in (650 x 900 mm) Plate Size (W x L) with extension plates 31.5 x 35.43 in (800 x 900 mm) Max. Forward Speed 82 ft./min (25 m/min) Operating Weight 1157.42 lbs. (525 kg.) Operating Weight with extension plates 1181.68 lbs. (536 kg.) Table 2.
DIMENSIONS Stored position Working position D C F A G B extension plate (option) Figure 1. Dimensions Table 3. Dimensions REF. DES IN. (MM) A 25.59 (650) B 31.5 (800) C 40.94 (1040) D 47.64 (1210) E 53.54 (1360) F 35.43 (900) G 63.00 (1600) PAGE 12 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
GENERAL INFORMATION DEFINITION OF PLATE COMPACTOR FREQUENCY/SPEED The Mikasa MVH508DZ is a reversible plate compactor designed for efficient compaction of sand, gravel and cohesive soils. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
COMPONENTS 1 2 4 3 5 8 6 7 10 27 12 Neutral Reverse Forward 9 11 (Stored position 13 11 17 (Working position) 14 16 15 Figure 2. Plate Compactor Components PAGE 14 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
COMPONENTS Figure 2 shows the location of the basic controls and components of the MVH508DZ Plate Compactor. The function of each control is described below: 1. Rubber Cover — Lift this rubber cover to gain access to the fuel tank. 2. Hour/Tachometer — Displays the cumulative time that the machine has been in use. During operation it displays the rpm reading. The tachometer also has a battery checker that lights red when the charge is low. 3.
BASIC ENGINE Figure 3. Engine Controls and Components INITIAL SERVICING The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s Engine manual for operating and servicing information. 1. Fuel Filler Cap/Fuel Tank — Pull this latch to add diesel fuel to the tank. After refueling, always make sure the fuel cap is latched properly. DO NOT over fill. For additional information refer to engine owner’s manual. .
INSPECTION BEFORE STARTING DANGER 1. Read all safety instructions at the beginning of manual. EXPLOSIVE FUEL! 2. Clean the compactor, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the compactor if the engine is hot or running! 3. Check the air filter for dirt and dust.
INSPECTION V-BELT COVER REMOVAL V-BELT TENSION To inspect the V-belt, remove the three bolts that secure the belt cover to the frame as shown in Figure 6. The V-belt tension is proper if the V-belt bends 10 to 15 mm (Figure 8) when depressed with finger at midway between the clutch and vibrator pulleys. REMOVE VIBRATOR CORRECT V-BELT TENSION 10-15 MM WHEN DEPRESSED AS SHOWN. CLUTCH PULLEY REMOVE V-BELT sa ika M V-BELT V-BELT COVER VIBRATOR PULLEY Figure 6.
INSPECTION HANDLE BAR The height of the handle bar can be adjusted for ease of use. Adjust the handle height as follows. Refer to Figure 10. 1. Loosen the wing nut. 2. Turn the grip clockwise to raise the handle or counterclockwise to lower the handle. 3. When the handle bar is raised to the desired height, tighten the wing nut. Grip Wing nut Figure 10. Handle Height Adjustment MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
STARTUP CAUTION DO NOT attempt to operate the compactor until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial startup of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field.
STARTUP Recoil Start 1. Insert the key to the key switch. 2. Move the throttle lever (Figure 11) to the idle position. 3. Turn the key to the "Run" position (Figure 12). The buzzer sounds. 4. After "HA" is displayed on the hour tachometer, the display will change immediately to "cumulative time" 5. Grasp the starter grip (Figure 15) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding the compression point.
OPERATION OPERATION 4. When the direction control lever is the neutral position, the machine vibrates staying at the same location CAUTION ALWAYS follow all safety rules in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause bodily injury or damage to the compactor. 1. Once the engine has started, move the engine throttle lever quickly to the operation position (Figure 16).
OPERATION 2. Move the throttle lever (Figure 19) to the "Stop" position to stop the engine. The buzzer will sound. Throttle lever Idle position Handle Stop position Figure 19. Throttle Lever (Stop Position) 3. Turn the key to the "Stop" position (Figure 20). The buzzer will stop. Figure 20. Key Switch (Stop) Emergency Shutdown 1. Move the throttle lever quickly to the IDLE position, and turn the key to the "Stop" position. MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
MAINTENANCE GENERAL MAINTENANCE General Cleanliness General maintenance practices are crucial to the performance and longevity of your compactor. This equipment requires routine cleaning, inspection and lubrication. Refer to Table 5 and Table 6 for scheduled engine and compactor maintenance. Clean the compactor daily. Remove all dust and debris buildup (mud, clay etc.). If the compactor is steam-cleaned, ensure that lubrication is accomplished AFTER steam cleaning.
MAINTENANCE To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Table 5 and Table 6. ENGINE MAINTENANCE Perform engine maintenance as listed in Table 5. Description (3) Engine Oil Air Cleaner All Nuts and Bolts Spark Plug Cooling Fins Spark Arrester Fuel Tank Fuel Filter Idle Speed Valve Clearance Fuel lines Operation Table 5.
MAINTENANCE MACHINE INSPECTION TIGHTENING TORQUE Perform machine inspection as listed in Table 6. Reference Table 7 below (Tightening Torque ), for retightening of nuts and bolts. Table 7. Tightening Torque (in. kg/cm Diameter) Table 6. Machine Inspection Interval Daily Before Starting Every 20 Hours Every 100 Hours Every 200 hours Every 300 hours Every 2 years Material 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 4T 70 150 300 500 750 1,100 1,400 2,000 Repair fuel leaks.
MAINTENANCE 2 Lock Dust exhaust BLOW COMPRESSED AIR FROM THE INSIDE OUT 1 Figure 23. Latching Dust Pot ENGINE OIL NOTICE Drain the engine oil when the oil is warm. Figure 21. Engine Air Cleaner 3. Clean foam element in warm, soapy water or nonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engine oil and completely squeeze out the excess oil from the element before installing. NOTICE 1. Remove the oil drain bolt (Figure 24).
MAINTENANCE HYDRAULIC OIL 1. With the handle in vertical position, remove the plug cap from the hydraulic pump (Figure 25). Breather plug 7. With the direction control lever at the forward-most position, secure the guard frame with a rope to immobilize (Figure 27). Forward-most position Plug cap Guard frame OIL LEVEL Direction control lever Hydraulic pump Figure 25. Removing Plug/Breather Cap 2. Remove the breather plug with a 24 mm wrench at the top of the hydraulic pump. 3.
MAINTENANCE SPARK PLUG SPARK ARRESTER CLEANING NOTICE Clean the spark arrester every year or 100 hours. NEVER use a spark plug of incorrect heat range. 1. Remove and clean spark plug (Figure 28) with a wire brush if it is to be reused. Discard spark plug if the insulator is cracked or chipped. 2. Using a feeler gauge adjust spark plug gap to 0.028 ~0.031 inch (0.7~0.8 mm). 3. Thread spark plug into cylinder hole by hand to prevent cross-threading, then tighten securely. 1.
MAINTENANCE BATTERY 2. Loosen the two bolts on each side of the bar connecting the battery to the side rails (Figure 34). NOTICE Battery is not included with this machine The standard battery is a maintenance-free battery. It is not necessary to supply battery fluid. In case of a sudden voltage drop, the battery cannot be charged quickly, so it has to be replaced with a new one. SLIDE BAR UPWARD TO ACCESS BATTERY Checking Battery Capacity 1. Check the battery checker on the hour tachometer (Figure 32).
MAINTENANCE Battery holder STORAGE 1. Wash off dirt and soil from every part with water. While washing, be careful not to let the water splash on the electric components such as the battery and the engine muffler. Nut 2. Cover the machine to prevent dust and dirt buildup. Battery 3. Store the machine in a dry area away from direct sunlight. 4. Do not leave the machine outdoors. Keep it indoors. 5.
TROUBLESHOOTING (COMPACTOR) Symptom Travel speed low and vibration weak. Travels forward or backward but unable to switch direction.
TROUBLESHOOTING (ENGINE) Troubleshooting (Engine) Symptom Engine will not start or start is delayed, although engine can be turned over. At low temperatures engine will not start. Engine fires but stops soon as starter is switched off. Engine stops by itself during normal operation. Low engine power, output and speed. Possible Problem Solution No Fuel reaching injection pump? Add fuel. Check entire fuel system. Defective fuel pump? Replace fuel pump.
TROUBLESHOOTING (ENGINE) Troubleshooting (Engine) - continued Symptom Low engine power output and low speed, black exhaust smoke. Engine overheats. Possible Problem Solution Air filter blocked? Clean or replace air filter. Incorrect valve clearances? Adjust valves per engine specification. Malfunction at injector? See engine manual. Too much oil in engine crankcase? Drain off engine oil down to uppermark on dipstick.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT .....................1 .....
SUGGESTED SPARE PARTS MVH508DZ PLATE COMPACTOR WITH 1D81S-325 DIESEL ENGINE 1 to 5 units Qty. P/N Description 4............070200483.............V-BELT 4............939010010.............SHOCK ABSORBER, STOPPER 3............50478800...............FUEL FILTER, IN-LINE 4............939010370.............SHOCK ABSORBER 1............50384401...............IGNITION SWITCH 3............50404900...............KEY, IGNITION SWITCH 1............50385801...............CAP, FUEL TANK 1............50387300.............
NOTES MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
VIBRATING PLATE ASSY. 24 25 22 19 20 23 18 7 19 20 8 6 18 10 14 2 3 5 16 4 15 1 11 13 12 PAGE 38 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
VIBRATING PLATE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 22 23 24 25 PART NO. 468121200 465460670 953402930 953400270 953405260 939010370 020316130 030216400 001221635 030216400 467219050 012218050 58407 939010010 020310080 030210250 468352110 014208020 030208200 467351790 050103250 014208020 030208200 PART NAME QTY.
VIBRATOR ASSY. 7 7 6 A 6 5 2 1 23 C 3 24 22 12 21 20 20 8 42 12 4 6 5 B 6 13 34 35 16 36 33 27 29 31 11 14 30 1 C A D 1 15 16 D B 32 28 40 30 41 1 17 49 48 44 46 47 PAGE 40 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
VIBRATOR ASSY. NO. 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 20 21 22 23 24 27 28 29 30 31 32 33 34 35 36 40 41 42 43 44 46 47 48 49 51 52 PART NO.
BASE AND ENGINE ASSY.
BASE AND ENGINE ASSY. NO. 1 2 3 4 5 7 8 9 11 12 15 16 17 18 19 22 24 25 26 27 28 29 32 33 34 35 37 38 39 40 41 42 43 45 46 47 48 49 51 52 53 54 55 56 PART NO.
BASE AND ENGINE ASSY.
BASE AND ENGINE ASSY. CONTINUED NO. 57 58 59 60 61 62 63 65 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 95 100 101 102 103 104 105 106 107 110 111 112 PART NO.
ELECTRIC DEVICE ASSY.
ELECTRIC DEVICE ASSY. NO. 1 2 3 4 5 9 10 11 12 14 15 16 18 23 24 25 26 28 29 30 31 32 33 35 36 37$ 40 41 42 43 45 46 47 48 49 50 PART NO.
ELECTRIC DEVICE ASSY.
ELECTRIC DEVICE ASSY. CONTINUED NO. 51 53 54 55 56 78 79 80 82 83 84 85 86 90 91 92 93 94 96 97 98 101 102 103 104@ PART NO. 467352050 009110062 952404470 030206150 022710607 465459680 959026021 959020014 469352400 001220635 030206150 001520530 506010070 009110072 952407930 022710506 030205130 58151 955301020 469467040 955407970 50384401 469352350 50465100 50404900 PART NAME QTY. REMARKS PANEL, REAR COVER 1 SOCKET HEAD SCREW 6X20 4 WASHER, FLAT M6 ...........................................4..............
CONTROL ASSY. 57 52 58 50 56 58 57 70 48 76 74 82 80 46 55 72 83 47 49 73 81 61 84 59 60 62 43 16 45 44 53 67 78 77 63 12 1 64 13 3 7 36 37 40 38 39 51 71 19 18 21 85 28 25 26 11 29 8 10 3 9 27 35 34 69 68 20 9 10 4 5 75 4 5 7 2 23 22 8 11 13 14 PAGE 50 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
CONTROL ASSY. NO. 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 25 26 27 28 29 34 35 36 37 38 39 40 43 43 PART NO. 467351950 467351960 012212035 030212300 031112230 456336400 456449940 025306016 456449930 032124400 001221681 0401450160 020316130 020416100 467121170 455434950 455010030 020412070 022411635 939010060 020310080 959408930 011206020 030206150 952404470 020106050 501402870 501402880 959403460 020310080 456449980 953405260 031110160 467351970 467351970 PART NAME QTY.
CONTROL ASSY. CONTINUED 57 52 58 50 56 58 57 70 48 76 74 82 80 46 55 72 83 47 49 73 81 61 84 59 60 62 43 16 45 44 53 67 78 77 63 12 1 64 13 3 7 36 37 40 38 39 9 10 4 5 51 18 21 85 28 27 35 69 68 20 25 29 8 71 19 26 11 75 10 3 9 7 4 5 2 23 AND PARTS MANUAL — REV.
CONTROL ASSY. CONTINUED NO. 44 45 46 47 48 49 50 51 52 53 55 56 57 58 59 60 61 62 63 64 67 68 69 70 71 72 73 74 75 76 77 78 80 81 82 83 84 85 PART NO.
NAMEPLATE AND DECALS ASSY. 20 6 8 21 2 19 16 22 15 3 23 17 11 7 19 4 1 13 14 12 5 PAGE 54 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
NAMEPLATE AND DECALS ASSY. NO. 1 2 3 4 5 6 7 8 12 13 14 15 16 17 19 20 21 22 23 PART NO.
HATZ 1D81S-325 ENGINE SPARE PARTS KIT ASSY. 1 2 3 6 7 9 8 PAGE 56 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE SPARE PARTS KITS ASSY. NO. 1 2 3 6 7 8 9 PART NO. 1517802 1249322 1249410 1942000 2265300 2268500 2269600 PART NAME GASKET SET, CYLINDER HEAD GASKET SET, CRANK CASE MAINTENANCE KIT, 1000H REPAIR SET, CAPSULE FILTER KIT, LIGHT FILTER KIT, MEDIUM FILTER KIT, HEAVY QTY. 1 1 1 1 1 1 1 REMARKS MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE ACCESSORIES ASSY. .... M 1 3 7 2 A B LOCTITE ACTIVATOR N LOCTITE 574 F TECH. ADHES. 8058 F1 TECH. CLEANER K L HOCHTEMP. FETT 400G SILICON SEALER C LOCTITE 601 G LOCTITE 407 D LOCTITE 221 E LOCTITE 648 H J TEROSON TEROSTAT 63 HIGH TEMP PASTE M GRINDING PASTE 80ML PAGE 58 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE ACCESSORIES ASSY. NO. A B C D E F F1 G H J K L M 1 2 3 7 PART NO.
HATZ 1D81S-325 ENGINE CRANKCASE 1 ASSY. SEALING AND BONDING ADHESIVES A D E H 28 3 29 1 15 15 3 26 24 3 4 5 12 14 9 27 18 13 19 6 11 16 10 23 3 9 7 32 17 NOT SOLD SEPARATELY PAGE 60 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE CRANKCASE 1 ASSY. NO. PART NO. A 50223001 D 50223300 E 50223400 H 70018944 1 01249070 2$ 3$ 50249102 4$ 03793900 5$ 03793801 6$ 03794000 7$ 03793700 7 04033700 9$ 04000800 10$ 50144300 11$ 03794510 12$ 03794800 13$ 50601200 14$ 50325500 15$ 50602901 16$ 50328200 17 02228000 18 04069500 18 04069600 19 04062010 23 50328200 24$ 26$ 27$ 04105000 28 50459800 29 04084500 30$ 31@ 32@ PART NAME QTY.
HATZ 1D81S-325 ENGINE CRANKCASE 2 ASSY. 56 61 K 32 D 32 28 27 60 59 39 1 35 34 29 D 28 31 24 22 H 1 27 2 3 26 D 4 4 D 23 7 6 10 5 21 SEALING AND BONDING ADHESIVES 21 3 6 20 63 2 11 H 8 62 12 13 D H D H K 5 H NOT SOLD SEPARATELY 18 17 15 15 15 16 16 16 D 14 17 18 PAGE 62 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE CRANKCASE 2 ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE CRANKSHAFT BEARING FLANGE ASSY. 14 25 12 B 11 9 8 E 23 16 3 1 E 6 15 7 4 5 24 SEALING AND BONDING ADHESIVES B E NOT SOLD SEPARATELY PAGE 64 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE CRANKSHAFT BEARING FLANGE ASSY. NO. PART NO. B 50223101 E 50223400 1 01269820 2$ 3$ 4 03796000 5 50055001 6$ 50362600 7 03796120 8 04000600 9 50224900 11 04064211 12 04006800 12 04036100 14 50362701 15 50413600 16 50364300 23 50414400 24 01512010 PART NAME QTY. REMARKS LOCTITE 574 1 LOCTITE 648 1 CRANKSHAFT ASSY..........................................1................INCLUDES ITEMS W/$ CRANKSHAFT....................................................1................
HATZ 1D81S-325 ENGINE CAMSHAFT ASSY. 4 PAGE 66 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE CAMSHAFT ASSY. NO. 4 PART NO. 04099920 PART NAME CAMSHAFT ASSY. QTY. 1 REMARKS MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE PISTON ASSY. ピストン 8 9 1 6 5 3 4 5 12 11 10 14 13 13 PAGE 68 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE PISTON ASSY. NO. PART NO. 1# 01313542 1 01314641 3$%# 4$%# 50461900 5$%# 50594900 6$# 01247310 6% 01264510 8# 9 01508330 10 01244001 11@ 12@ 04032200 13@ 04001810 14 02251900 14 02252100 PART NAME QTY. REMARKS PISTON SET 100 STD........................................1................INCLUDES ITEMS W/$ PISTON 100+0.5MM OVERSIZE........................1................INCLUDES ITEMS W/% PISTON...............................................................1................
HATZ 1D81S-325 ENGINE CYLINDER HEAD ASSY. SEALING AND BONDING ADHESIVES 49 48 49 48 47 K 85 ※22 ※13 21 20 19 46 21 20 57 53 55 55 27 K 11 10 17 15 18 12 11 91 51 52 50 9 83 10 9 8 83 K 3 8 3 44 45 61 90 4 61 1 24 5 28 23 25 26 29 31 66 67 1D50 35,36,37,38,39,40,41,42,43 7 6 67 60 NOT SOLD SEPARATELY PAGE 70 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE CYLINDER HEAD ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE CYLINDER HEAD ASSY. (CONTINUED) SEALING AND BONDING ADHESIVES 49 48 49 48 47 K 85 ※22 ※13 21 20 19 46 21 20 57 53 55 55 27 K 11 10 17 15 18 12 11 91 51 52 50 9 83 10 9 8 83 K 3 8 3 44 45 61 90 4 61 1 24 5 28 23 25 26 29 31 66 67 1D50 35,36,37,38,39,40,41,42,43 7 6 67 60 NOT SOLD SEPARATELY PAGE 72 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE CYLINDER HEAD ASSY. (CONTINUED) NO. PART NO. 41 04002900 41 04241500 42 04003000 42 04241600 43 04003100 44 04003200 45 04003300 46 04006111 47 01245414 48 50081200 49 50170800 50 04008100 51 50366300 52 50208500 53 01493200 54@ 55@+ 50326200 56@+ 57 01308301 60 01269700 61 03457500 66# 04004200 67# 50330100 72# 83 50634900 85 01285010 90 04104300 91 01557600 PART NAME QTY. REMARKS GASKET F. CYLINDER HEAD 1.1 MM 1 GASKET F. CYLINDER HEAD 1.15 MM 1 GASKET F. CYLINDER HEAD 1.
HATZ 1D81S-325 ENGINE PUSHROD, FLYWHEEL ASSY. 1 2 16 14 15 3 8 10 4 5 10 6 7 10 13 10 10 PAGE 74 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE PUSHROD, FLYWHEEL ASSY. NO. 1 2 3 4 5 6 7 8 10 13 14 15 16 PART NO. 01244310 50330200 04002500 50347000 04002600 04002000 50330300 04007500 50397100 03123700 04007133 04007410 50363100 PART NAME PUSHROD O-RING PROTECTION TUBE CIRCLIP PRESSURE SPRING PRESSURE RING O-RING RING, FLYWHEEL ALLEN SCREW BUSHING FLYWHEEL PLATE ALLEN SCREW QTY. 2 2 2 2 2 2 2 2 1 7 1 1 6 REMARKS MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE OIL PUMP, GOVERNOR ASSY. M10 OIL PUMP,GOVERNOR ／ オイルポンプ、ガバナ SEALING AND BONDING ADHESIVES H 15 14 13 12 21 12 11 1 17 21 2 16 10 H 20 18 16 19 3 23 4 6 7 22 8 NOT SOLD SEPARATELY. PAGE 76 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE OIL PUMP, GOVERNOR ASSY. NO. H 1 2$ 3$ 4$ 6 7 8 10$ 11$ 12$ 13$ 14 15 16 17 18 19 20$ 21$ 22 22 23 PART NO. 70018944 50328000 03797412 01242401 03797310 04063400 03798600 50334700 03797512 04277100 04277300 04277202 03797900 03797801 50081200 50170800 50051000 50084901 03798720 50594300 04262500 04046000 01242330 PART NAME QTY.
HATZ 1D81S-325 ENGINE TIMING COVER ASSY. 11 3 15 5 16 11 11 7 8 9 4 17 2 NOT SOLD SEPARATELY. PAGE 78 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE TIMING COVER ASSY. NO. PART NO. 2 01267731 3$ 50325600 4$ 50325701 5$ 50325811 7 50330400 8 04000400 9 50399000 11 50417400 14$ 15$ 04000310 16$ 04023210 17$ 50364701 PART NAME QTY. REMARKS TIMING COVER ASSY........................................1................INCLUDES ITEMS W/$ COVER 50 1 COVER 52 1 OIL SEAL 1 O-RING 1 COVER 1 CIRCLIP 1 ALLEN SCREW 13 TIMING COVER..................................................1................
燃料ポンプ HATZ 1D81S-325 ENGINE FUEL PUMP ASSY. M12 FUEL PUMP ／ (20) 21 22 23 24 45 37 26 27 26 28 25 42 35 43 48 32 45 58 36 34 31 47 39 40 45 41 46 45 44 30 15 14 13 14 19 18 2 45 D 3 17 1 10 10 6,7,8,9 SEALING AND BONDING ADHESIVES 14 11 20 16 51 14 15 D NOT SOLD SEPARATELY. PAGE 80 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE FUEL PUMP ASSY. NO. PART NO.
M26a HATZ 1D81S-325 ENGINE AIR DUCTING ／ エアダクティング 22 11 10 AIR DUCTING ASSY. 49 11 10 10 10 12 12 10 11 10 48 7 9 SEALING AND BONDING ADHESIVES 2 1 12 D D 12 10 44 43 45 46 10 21 23 12 4 10 4 10 31 3 5 10 12 3 19 17 14 18 15 18 16 25 51 28 29 20 29 20 29 52 30 NOT SOLD SEPARATELY. PAGE 82 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE AIR DUCTING ASSY. NO. PART NO. D 50223300 1 01246223 2$ 3$@ 04007601 4$@ 04007720 5 01246413 6@ 7 01246600 8# 9# 04007901 10 50390701 11 020106050 12 50528100 14 04008500 15 50093700 16 50093600 17 50475000 18 50474900 19 01689100 20 50333500 21$ 50334800 22 50416800 23 50226000 24 25 40002500 28 04080410 29 50170900 30 50177100 31 50416800 43 01268010 44 04038800 45 50120000 46 50328300 48 04125700 49 04125601 51 50093700 52 50093600 PART NAME QTY.
HATZ 1D81S-325 ENGINE SPEED CONTROL ASSY. 42 37 38 39 40 43 44 45 41 3 4 5 7 46 D 79 52 10 12 54 15 53 26 4 16 17 2 61 D 81 11 80 78 23 22 21 9 8 13 6 D 24 SEALING AND BONDING ADHESIVES D 14 20 76 NOT SOLD SEPARATELY 74 PAGE 84 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE SPEED CONTROL ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE FUEL TANK ASSY. 31 32 28 11 3 4 5 6 20 3 052610 2 52 10 32 3 4 5 4 3 8 6 9 24 30 4 3 23 21 22 25 27 12 13 46 47 50 14 48 49 15 54 55 16 17 47 53 51 18 19 PAGE 86 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE FUEL TANK ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE AIR FILTER ASSY. 35 47 48 46 111 41 112 40 2 2 1 53 5 6 34 2 3 42 66 7 10 9 8 85 86 12 52 50 15 16 65 63 65 64 61 54 55 56 57 58 59 60 62 61 51 NOT SOLD SEPARATELY. PAGE 88 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE AIR FILTER ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE MUFFLER ASSY. 20 J 27 SEALING AND BONDING ADHESIVES 19 D J 18 19 J 3 29 6 30 2 1 21 22 D 23 24 NOT SOLD SEPARATELY PAGE 90 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE MUFFLER ASSY. NO. PART NO. D 50223300 J 50283004 1 01498803 2$ 3$ 50404000 6$ 03974300 18 01191902 19 05034202 20 50255700 21 03985300 22 50135700 23 40091400 24 50165400 27 50120000 29$ 50208500 30$ 04125601 PART NAME QTY. REMARKS LOCTITE 221 1 HIGH TEMPERATURE PASTE 1 EXHAUST SILENCER ASSY. ............................1................INCLUDES ITEMS W/ $ SILENCER, EXHAUST.......................................1................
HATZ 1D81S-325 ENGINE STARTING HANDLE ASSY. 50 38 39 32 38 SEALING AND BONDING ADHESIVES D J 33 47 48 D 53 51 46 23 44 45 35 16 14 27 17 K 13 11 12 D 19 5 26 25 24 20 34 18 10 9 8 6 20 24 25 NOT SOLD SEPARATELY. PAGE 92 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE STARTING HANDLE ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE STARTING MOTOR ASSY. 23 46 59 29 35 61 3736 21 22 31 6 34 33 38 32 30 18 44 22 20 27 7 26 1 2 34 17 24 21 58 4320 62 15 14 13 14 11 37 28 7 8 5 9 6 42 NOT SOLD SEPARATELY. PAGE 94 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE STARTING MOTOR ASSY. NO. PART NO.
HATZ 1D81S-325 ENGINE SPEC. EQUIPMENT ASSY. AE 1 2 15 E 11 9 3 4 10 7 5 6 8 14 PAGE 96 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S-325 ENGINE SPEC. EQUIPMENT ASSY. NO. A E 1 2 3 4 5 6 7 8 9 10 11 14 15 PART NO. 50223001 50223400 04167010 50004600 50403500 04153700 04153800 04134200 04129700 04126700 04244500 50507800 04239200 04187700 04205900 PART NAME LOCTITE ACTIVATOR N LOCTITE 574 CLOSING PLUG GRUB SCREW GRUB SCREW CLOSING PLUG SUPPORT DISC BUSHING THREADED BUSHING CAP GRUB SCREW SECURING NUT CAP CLOSING PLUG QTY. 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 REMARKS MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.
