PARTS AND OPERATION MANUAL © COPYRIGHT 2001, MULTIQUIP INC. STH-SERIES RIDE-ON POWER TROWEL Revision #5 (06/08/05) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
TABLE OF CONTENTS Here's How To Get Help ......................................... 3 Table Of Contents .................................................. 4 Parts Ordering Procedures .................................... 5 Training Checklist ................................................... 6 Daily Pre-Operation Checklist ................................ 7 Rules For Safe Operation ................................... 8-9 Specifications .......................................................
PARTS ORDERING PROCEDURES ■ ■ ■ ■ ■ ■ ■ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: • • • • UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* • • Airborne Express* Truck or parcel post *Normally shipped the same day the order
TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and hydraulic oil levels.
DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine oil level. 2 Hydraulic oil level. 3 Radiator coolant level. 4 Condition of blades. 5 Blade pitch operation. 6 Kill switch (seat) operation. 7 Steering control operation. COMMENTS: STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
RULES FOR SAFE OPERATION CAUTION Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only and should not be regarded as a toy. The following safety guidelines should always be used when operating the STH Ride-on Power Trowel: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
STH-55JD-TC — RULES FOR SAFE OPERATION Moving the Ride-On Trowel CAUTION This ride-on trowel is very heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT attempt to lift the ride-on trowel by the guard rings. The STH series Ride-on Power Trowel is designed to be moved and handled several ways. The easiest way to lift the ride-on trowel is to utilize the lift loops that are welded to the frame.
STH-55JD-TC — SPECIFICATIONS Figure 1. STH Dimension Specifications Table 2. STH Specifications STH-55JD-TCSL SPECIFICATION PARAMETER 125 (318) A–Length – in. (cm) 65.0 (165) B–Width – in. (cm) 56.0 (142) C–Height – in. (cm)1 2,230 (1014) Weight – lbs. (kgs.) Operating 2730 (1241) Weight – lbs. (kgs.) Shipping 2 97 Sound Pressure – dBA 2 2 3 <8.0 (2.5) Vibration – ft/s (m/ s ) 1924 (9.9) Blade Tip Speed – FPM (m/s) 55 (John Deere, Diesel Turbocharge) Engine – H.P.
STH-55JD-TC — GENERAL INFORMATION STH RIDE-ON TROWEL FAMILIARIZATION Hydraulic Steering The STH series Ride-On Power Trowels are designed for the floating and finishing of concrete slabs. Dual joystick controls located to the left and right of the operator are provided for steering the STH-Ride on Power Trowel. The joysticks are linked to three hydraulic steering cylinders located within the frame of the machine.
STH-55JD-TC — CONTROLS AND INDICATORS Figures 2 and 3 show the location of the controls, indicators and 8. general maintenance parts. Each control may perform more than one function. All functions of each control are described below. 9. 1. Seat – Place for operator to sit. Engine will not start unless operator is seated. Seat is adjustable for operator comfort. 10. 2. 3. 4. 5. 6. 7. Charge Indicator Light - Lights red when electrical system is not charging properly.
STH-55JD-TC — CONTROLS AND INDICATORS 17. Blade Pitch Control Switch (left side) - When the rocker switch is pressed down and to the left it will cause less pitch to be added to the left side blades only. Pressing the rocker switch down and to the right will cause more pitch to be added to the left side blades only. This switch will not effect the right side blades for pitch. 27. Left Foot Riser – Operator foot rest pedal. 18.
STH-55JD-TC — INITIAL START-UP This section is intended to assist the operator with the initial start-up of the STH series Ride-On Power trowel. It is extremely important that this section be read carefully before attempting to use the trowel in the field. DO NOT use your ride-on power trowel until this section is throughly understood. .CAUTION Failure to understand the operation of the STH Ride-ON Power Trowel could result in severe damage to the trowel or personal injuruy.
STH-55JD-TC — INITIAL START-UP 3. 4. It is recommended that the kill switch be used to stop the engine after every use. Doing this will verify that the switch is working properly and presents no danger to the operator. Remember to turn the key to the “OFF” position after stopping the machine. Not doing so may drain your units’ battery. Place the engine throttle lever (Figure 7) in the LOW position.
STH-55JD-TC — INITIAL START-UP Table 3 Joystick Directional Positioning DIRECTION RESULTS Causes only the left side Left Move Joystick Forward of the ride-on trowel to move forward. Causes only the left side Left Move Joystick Backward of the ride-on trowel to move backward. Causes only the right side Right Move Joystick Forward of the ride-on trowel to move forward. Causes only the right side Right Move Joystick Backward of the ride-on trowel to move backward.
STH-55JD-TC — MAINTENANCE NOTE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. At the front of the book (Page B) there is a “Daily Pre-Operation Checklist”. Make copies of this checklist and use it on a daily basis. CAUTION! Blade speed adjustment is a two-step process. First, the left spider’s speed should be checked and/or adjusted. Second, the right spider’s speed should be adjusted to match the left.
STH-55JD-TC — MAINTENANCE Blade Pitch Adjustment Procedure The maintenance adjustment of blade pitch is an adjustment that is made by a bolt (Figure 17) on the arm of the trowel blade finger. This bolt is the contact point of the trowel arm to the lower wear plate on the thrust collar. The goal of adjustment is to promote consistent blade pitch and finishing quality. Figure 16. Pump Actuation Levers/Speed Control Rod Sometimes it may be necessary to match blade pitch between the two sets of blades.
STH-55JD-TC — MAINTENANCE It will be possible to adjust the “high” bolts down to the level of the one that is not touching, or adjust the “low” bolt up to the level of the higher ones. If possible, adjust the low bolt up to the level of the rest of the bolts. This is the fastest way, but may not always work. Verify that after adjustment, the blades pitch correctly. Often times, if the blades are incorrectly adjusted, they will not be able to pitch flat.
STH-55JD-TC — TROUBLESHOOTING TABLE 3. TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety kill switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Kill switch malfunction? Make sure that the kill switch is functioning when the operator is seated; replace switch if necessary. Fuel? Look at the fuel system.
STH-55JD-TC — TROUBLESHOOTING TABLE 3. TROUBLESHOOTING (CONTINUED) SYMPTOM POSSIBLE PROBLEM SOLUTION Wiring? Check all electrical connections, including the master on/off switch and check to see if wiring is in good condition with no shor ts. Replace as necessary. Lights? Check to see if light bulbs are still good. Replace if broken. Retardant? Check the tank to make sure retardant is present. Fill tank as necessary.
STH-55JD-TC — EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
STH-55JD-TC — SUGGESTED SPARE PARTS ENGINE JOHN DEERE JD4020TF005, 55 HP 1 Unit Qty. P/N Description 1 ............ 11577 .................... MOUNT, MACHINERY 1 ............ 10568 .................... THROTTLE CABLE ASSY 3 ............ JDRG600690 ........ AIR FILTER 3 ............ JDM801209 .......... FUEL FILTER 4 ............ 11141 .................... SPACER ROD END 2 ............ 11142 .................... ROD END 2 ............ 12038 .................... BELLOWS 1 ............ 12099 .................
STH-55JD-TC — PIVOT ASSY. (LEFT) PAGE 24 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — PIVOT ASSY. (LEFT) LEFT PIVOT ASSY. NO PART NO PART NAME QTY REMARKS 1 2 3 5 7 10 11 12 14 15 17 18 19 20 0166 A 0205 10133 10176 1023 11772 11773 11882 12112 12291 12295 12304 12591 12480 WASHER, LOCK, 3/8 MED 4 SCREW, HHC 3/8-16 X 1 10 NUT, NYLOC 3/8-16 8 NUT, NYLOC 1/2-13 4 SCREW, HHC 3/8-16 X 1 1/4 4 SHIM, TRUNNION .063 THICK 1 SHIM, TRUNNION .
STH-55JD-TC — PIVOT ASSY. (RIGHT) PAGE 26 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — PIVOT ASSY. (RIGHT) RIGHT PIVOT ASSY. NO PART NO PART NAME QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 20 0166 A 0205 10133 10138 10176 10221 1023 11154 11420 11772 11773 11882 12086 12112 12292 12295 12304 12591 12480 WASHER, LOCK, 3/8 MED SCREW, HHC 3/8-16 X 1 NUT, NYLOC 3/8-16 SCREW, SHS 1/4-20 X 1/2, N.P. NUT, NYLOC 1/2-13 BUSHING, 1ID X 1.1/8 OD X 1 LG SCREW, HHC 3/8-16 X 1 1/4 RETAINER, CENTRIFUGAL CLUTCH SHAFT, PIVOT SHIM, TRUNNION .063 THICK SHIM, TRUNNION .
STH-55JD-TC — PITCH ASSY. (RIGHT) PAGE 28 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — PITCH ASSY. (RIGHT) PITCH (RIGHT) ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 13 14 16 17 19 20 21 21 22 23 24 25 26 30 31 32 33 34 35 36 37 38 0166A 0183 0202 0448 11648 11699 11721 11722 11780 11889 11966 11972 12030 12096 12116 12151 12159 12183 12579 12257 12246 12247 12259 12260 12277 1648 4196 5070B 5283 60103 8128 12244 12213 WASHER, LOCK, 3/8 MED PIN, COTTER 1/8 X 1 ¼ SCREW, HHC 1/16-18 X 1 WASHER, FLAT, 7/16 SAE SHAFT, YOKE PIVOT HOSE, BLACK 52.
STH-55JD-TC — PITCH ASSY. (LEFT) PAGE 30 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — PITCH ASSY. (LEFT) PITCH (LEFT) ASSY.
STH-55JD-TC — ENGINE (JOHN DEERE) HTH — ENGINE (VANGUARD)HTH — ENGINE (VANGUARD) PAGE 32 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — ENGINE (JOHN DEERE) ENGINE (JOHN DEERE) NO PART NO PART NAME QTY.
STH-55JD-TC — ENGINE (JOHN DEERE) PAGE 34 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — ENGINE (JOHN DEERE) ENGINE (JOHN DEERE) NO PART NO PART NAME 1 14 15 16 17 20 24 27 28 29 35 36 37 38 39 40 41 42 43 44 45 0161C 12041 12071 12104 12122 2866 60049 0131 A 0181 B 0948 0300 B 121256-44600 JDRG60690 JDT111383 JDM801209 12617 JDRG60510 JDT110736 TC007 JDRG60688 JDM81118 WASHER, LOCK, 5/16 MED MOUNT AIR FILTER RADIATOR BRACKET, LARGE ENGINE JD4020TF005, 55 HP COVER, RADIATOR SCREW, HHC M8-1.
STH-55JD-TC — HYDRAULIC STEERING (LEFT) ASSY. PAGE 36 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — HYDRAULIC STEERING (LEFT) ASSY. HYDRAULIC STEERING (LEFT) ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 18 20 21 24 25 27 28 29 30 36 41 0161 C 0300 B 10176 10229 11141 11142 11146 11676 11722 11723 11725 11780 12038 12055 12056 12060 12099 12115 12141 12142 12171 12172 12177 12223 12402 0447 WASHER, LOCK, 5/16 MED.
STH-55JD-TC — HYDRAULIC STEERING (RIGHT) ASSY. PAGE 38 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — HYDRAULIC STEERING (RIGHT) ASSY. HYDRAULIC STEERING (RIGHT) ASSY. NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 9 10 13 17 18 19 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 38 39 40 41 42 0161 C 0300 B 10176 10229 11141 11142 11146 11676 11698 11721 11725 12056 12060 12098 12115 12136 12137 12141 12142 12159 12171 12172 12177 12223 12244 12273 12274 12275 12318 12409 16333 16334 2549 0447 12257 WASHER, LOCK, 5/16 MED.
STH-55JD-TC — VALVE ASSY. (LEFT) PAGE 40 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — VALVE ASSY. (LEFT) VALVE ASSY. (LEFT ) NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 12115 12519 HU51761 HU51770 12536 HU53748 12523 12521 HU7472-A11 HU51773-1 12099 HU51941 HU51494 HU3108 HU53-908 HU3182 HU53-906 HU51775 HU51771-1 HU51769 HU51774 HU51770 HANDLE BOOT, LEFT CAP SCREW-FLAT HD RETAINING RING-EXT GASKET SPRING PLUNGER CAPSULE ASSY. METERING CAPSULE ASSY.
STH-55JD-TC — VALVE ASSY.
STH-55JD-TC — VALVE ASSY. (RIGHT) VALVE ASSY. (RIGHT) NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 12115 12518 HUP51999 HU53616 12535 HU53748 12523 12521 HU51505-A1 HU52698 12098 HU51489 HU51494 12520 HANDLE BOOT, RIGHT BOLT ASSY, PIVOT RETAINING RING-EXT GASKET SPRING PLUNGER CAPSULE ASSY. METERING CAPSULE ASSY. HOUSING VALVE CLAMP, BOOT VALVE ASSY (RIGHT) PLATE-PIVOT NUT-SPECIAL MOUNTING PLATE 1 1 1 2 4 4 4 4 1 1 1 1 1 1 * * * * * * * * * * * * REMARKS INCLS.
STH-55JD-TC — HANDLE ASSY. PAGE 44 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — HANDLE ASSY. HANDLE ASSY. NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 9 10 11 12115 OEMAA5 OEMAA7 12473 OEMAA8 11676 OEMAA6 12487 OEM2783AM OEMAA9 12474 HANDLE ASSY, UPPER SCREW LOWER SCREW 10 AMP MOMENTARY SPST PB SWITCH LOWER NUT ADAPTER COUPLING W/CABLE PASSAGE UPPER NUT BOOT, TOP HANDLE 2-PIECE HANDLE W/HARDWARE ROCKER ASSEMBLY COMPLETE MICROSWITCH (SOLDER TABS) 1 ....................... INCLS. ITEMS W/ 2 2 1 2 1 2 1 1 1 2 * * * * * * * * * REMARKS * STH-10 FT.
STH-55JD-TC — HYDRAULIC PUMP (TOP) DRIVE ASSY. PAGE 46 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — HYDRAULIC PUMP (TOP) DRIVE ASSY. HYDRAULIC PUMP (TOP) DRIVE ASSY.
STH-55JD-TC — HYDRAULIC PUMP (BOTTOM) DRIVE ASSY. PAGE 48 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — HYDRAULIC PUMP (BOTTOM) DRIVE ASSY. HYDRAULIC PUMP (B0TT0M) DRIVE ASSY. NO PART NO PART NAME 7 8 16 17 19 21 31 32 36 51 11386 11588 12076 12077 12080 12082 12130 12131 12145 3911385 FITTING, STR 12MJ-12MO HOSE ASM, 3/4 ID X 27LG 90 END HOSE ASM, 3/4IDX37LNG 90 END HOSE ASM, 3/4IDX35 STR ENDS HOSE ASM, 3/4ID 64.5LNG 90 END HOSE ASM, 1 ID 18.25LN 100R1 FITTING, STR 12MJ-16MO FITTING, 90 12MJ-16MO FIT, TEE 12MO-12MJ-16MJ RUN FITTING, 90 12MJ-12MO QTY.
STH-55JD-TC — HYDRAULIC PUMP (REAR) DRIVE ASSY PAGE 50 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — HYDRAULIC PUMP (REAR) DRIVE ASSY HYDRAULIC PUMP (REAR) DRIVE ASSY NO PART NO PART NAME 1 2 3 7 12 13 14 16 17 20 24 25 27 28 29 34 37 40 41 42 44 48 56 57 0161 0300 0655 11386 11883 11884 11893 12076 12077 12081 12121 12124 12126 12127 12128 12143 12146 12171 12176 12179 12327 3333 8128 0202 WASHER, LOCK, 5/16 MED WASHER, FLAT, 5/16 SAE SCREW, HHC 5/16-18 X 3/4 FITTING, STR 12MJ-12MO HOUSING, SUC.
STH-55JD-TC — 6-BLADE SPIDER (LEFT) ASSY PAGE 52 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — 6-BLADE SPIDER (LEFT) ASSY 6-BLADE SPIDER (LEFT) ASSY NO 1 2* 3* 4* 5* 6* 7* 8* 9* 10* 11* 12* 13* 14* 15 16 17+ 18 19# 20 21 22 23 24 25 26 27* 28* PART NO 11980 11991 9005 0166 A 1876 0164 B 9006 11039 9111 1875 1322 11992 11602 1162 A 12250 12000 11464 11493 12181 2621 1162 A 11940 12220 12371 12394 12550 105 0161C PART NAME SPIDER ASM, LEFT SIDE ARM, TROWEL EXTENDED LEVER, TROWEL ARM LEFT SIDE WASHER, LOCK, 3/8 MED.
STH-55JD-TC — 6-BLADE SPIDER (RIGHT) ASSY PAGE 54 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — 6-BLADE SPIDER (RIGHT) ASSY 6-BLADE SPIDER (RIGHT) This is aASSY test. Thank you so much. NO 1 2* 3* 4* 5* 6* 7* 8* 9* 10* 11* 12* 13* 14* 15 16 17+ 18 19# 20 21 22 23 24 25 26 27* 28* PART NO 11981 11991 1986 9006 0166 A 1876 0164 B 11039 2143 1875 1322 11992 11602 1162 A 12250 12000 11464 11493 12181 2621 1162 A 11940 12220 12371 12394 12550 105 0161C PART NAME SPIDER ASM, RIGHT SIDE ARM, TROWEL EXTENDED LEVER, TROWEL ARM RIGHT SIDE PIN, ROLL 5/16 X 2 WASHER, LOCK, 3/8 MED.
STH-55JD-TC — STABILIZER RING ASSY PAGE 56 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — STABILIZER RING ASSY STABILIZER RING ASSY NO PART NO PART NAME QTY. 1 2 3 4 5 0161C 12185 1237 1723 6014C WASHER, LOCK, 5/16 MED RING, STABILIZER, EXT ARM, HD SCREW, SCH 5/16-18 X 7/8 ROD END, 5/16-24 MALE NUT, HEX FINISH 5/16-24 6 1 6 6 12 REMARKS STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — TOP PANEL (LEFT) PAGE 58 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — TOP PANEL (LEFT) /DECALS TOP PANEL (LEFT) NO 1 4 14 15 18 21 26 34 37 38 40 48 PART NO 0161 C 0300B 11246 11247 11534 11663 11811 1228 12249 12287 12289 2923 PART NAME WASHER, LOCK, 5/16 MED WASHER, FLAT, 5/16 SAE DECAL SET, INTERNATIONAL STDS DECAL (HELMET, FOOT, HAND) NUT, "U" TYPE, 1/4-20 PANEL, REAR LEFT DECAL, DIESEL FUEL PANEL TOP, LEFT DECAL LEFT PITCH ONLY SCREW, THP 1/4 X 20 X 3/4 SS SCREW, BHSC 5/16 X 24 X 1 SS GROMMET, 7/16 ID, 1/16 X 9/16 GRV QTY.
STH-55JD-TC — TOP PANEL (RIGHT) PAGE 60 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — TOP PANEL (RIGHT) TOP PANEL (RIGHT) NO 2 5 6 7 8 9 12 16 17 18 19 21 22 24 27 29 31 33 36 38 39 41 42 43 44 45 47 49 50 57 58 59 60 61 62 63 64 65 PART NO 0169 0447 0937 10019 10024 10133 10568 11265 11379 11534 11593 11663 11673 11712 11912 JDRG60051 12005 12227 12248 12287 12288 GE#57 JDRG60049 12348 12401 2153 2814 3513 4001 12240 3043 60049 12053 JDRG60514 JDRG60509 JDRG60504 10176 TC007 PART NAME SCREW, HHC 3/8-16 X 3 WASHER, FLAT, 1/2 SAE NUT, HEX 10-32 NUT, NYLOC 10-32 NUT, NYLOC 1/4-
STH-55JD-TC — FRONT PANEL (RIGHT) PAGE 62 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — FRONT PANEL (RIGHT) FRONT PANEL RIGHT NO 7 8 13 22 28 30 38 46 51 52 56 64 PART NO 10019 10024 11098 11673 11924 12001* 12287 2203 4682 5065B 8381 11792 PART NAME NUT, NYLOC 10-32 NUT, NYLOC 1/4-20 CIRCUIT BREAKER (40 AMP, 12V) PANEL, FRONT RIGHT IGNITION SWITCH WITH KEYS KEYS, IGNITION SWITCH SCREW, THP 1/4 X 20 X 3/4 SS WASHER, FLAT #10 LIGHT SWITCH SCREW, RHM 10-32 X 1/2 BOOT, TOGGLE SWITCG ACCESSORY SOLENOID QTY. 2 2 1 1 1 1 2 2 1 2 1 1 REMARKS INCLUDES ITEM W/* STH-10 FT.
STH-55JD-TC — SEAT AND FRAME PAGE 64 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — SEAT AND FRAME SEAT AND FRAME NO 3 4 10 11 20 23 25 32 35 38 53 54 55 60. PART NO 0183 0300B 10176 10306 11632 11674 11760 12218 12230 12287 5283 8081 8087 12053 PART NAME PIN, COTTER 1/8 X 1 1/4 WASHER, FLAT, 5/16 SAE NUT, NYLOC 1/2-13 SCREW, HHC 1/2 x 13 X 4 1/2 SEAT, MICHIGAN # V1025 W/ARMS PANEL, FRONT CENTER DECAL, FRONT PANEL “HYD-S DRV” FRAME, SEAR W/A STH PLATE, SEAT W/A SCREW, THP 1/4 X 20 X 3/4 SS NUT, NYLOC 5/16-18 PIN, CLEVIS 1/2 X 2 3/4 SCREW, HHC 1/2 X13 X 4 QTY.
STH-55JD-TC — FRAME AND FUEL TANK PAGE 66 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — FRAME AND FUEL TANK FRAME AND FUEL TANK NO PART NO PART NAME QTY. 2 3 6 15 19 22 23 24 26 32 35 36 37 38 39 40 41 46 48 49 50 55 56 57 58 59 60 61 62 63 64 65 66 0202 0300 B 0948 10818 11418 11937 11534 11584 11628 11678 11819 11922 12007 12010 12021 12025 13118 19633 12235 3233 5283 0166 A 12023 ZINFB08 ZINFB15 12488 ZINFB04 12489 ZINPS0014 12332 ZINFB03 12247 12246 SCREW, HHC 5/16 – 18 X 1 WASHER, FLAT, 5/16 SAE WASHER, FLAT, 1/4 SAE DECAL, MQ WHITEMAN, 23 – 1/2” FUEL CAP/GAUGE (10.
STH-55JD-TC — FOOT PEDALS PAGE 68 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — FOOT PEDALS FOOT PEDALS NO PART NO PART NAME 5 8 10 16 17 20 21 25 27 28 29 30 31 42 45 48 52 67 0730 10024 10136 11199 11228 11491 11492 11611 11638 11641 11643 11656 11677 1484 19378 12235 6014 B 8126 SCREW, HHC 1/4 – 20 X 1 NUT, NYLOC 1/4 – 20 WASHER, FLAT, 3/8 SAE BASE, SPEED CONTROL PEDAL W/A ACCELERATOR PEDAL W/A CABLE, FOOT PEDAL ASSY.
STH-55JD-TC — BATTERY PAGE 70 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — BATTERY BATTERY NO PART NO PART NAME 1 4 5 6 7 8 9 11 12 13 14 23 33 34 43 44 47 53 54 55 0161 C 0479 0730 0948 0949 10024 10031 12278 10314 10315 10318 13212 11692 11693 1597 2866 2509 911329 11691 0166A WASHER, LOCK, 5/16 MED. WASHER, EXT. SHKP, 3/8 PLTD SCREW, HHC 1/4 – 20 X 1 WASHER, FLAT, 1/4 SAE NUT, HEX FINISH 1/4 – 20 NUT, NYLOC 1/4 – 20 WASHER, EXT.
STH-55JD-TC — SPRAY ASSY ABOVE S/N ID60204 PAGE 72 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — SPRAY ASSY ABOVE S/N ID60204 SPRAY ASSY ABOVE S/N ID60204 NO PART NO PART NAME QTY.
STH-55JD-TC — SPRAY ASSY BELOW S/N ID60205 PAGE 74 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — SPRAY ASSY BELOW S/N ID60205 SPRAY ASSY BELOW S/N ID60205 NO PART NO PART NAME QTY.
STH-55JD-TC — LIGHT ASSY ABOVE S/N ID60204 PAGE 76 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — LIGHT ASSY ABOVE S/N ID60204 LIGHT ASSY ABOVE S/N ID60204 NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 10320 12171 12176 12179 2532 12418 8128 8125 BRACKET, LIGHT SEAL, WEATHERPACK 16-18 GA CONNECTOR, WEATHERPACK 2-PIN TERMINAL, MALE 14-16 GA LIGHT, RECTANGULAR WIRE ASSY., STH LIGHT CLAMP, HOSE SUPPORT, 5/16 CLAMP, HOSE SUPPORT, 5/8 2 12 6 12 6 1 2 1 REMARKS STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — LIGHT ASSY BELOW S/N ID60205 PAGE 78 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — LIGHT ASSY BELOW S/N ID60205 LIGHT ASSY BELOW S/N ID60205 NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 10320 12171 12176 12179 2532 5287 3233 12418 BRACKET, LIGHT SEAL, WEATHERPACK 16-18 GA CONNECTOR, WEATHERPACK 2-PIN TERMINAL, MALE 14-16 GA LIGHT, RECTANGULAR NUT, NYLOC 5/16-18 WASHER,FENDER, 1.5 O.D. X 3/8 I.D. WIRE ASSY, STH LIGHT 2 12 6 12 6 2 2 1 REMARKS STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — E-Z MOVER AND LIFT HANDLE PAGE 80 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC — E-Z MOVER AND LIFT HANDLE E-Z MOVER AND LIFT HANDLE NO PART NO PART NAME 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 10176 1138 11810 12280 12284 12285 12333 12334 12352 16526 16630 19716 3264 4001 7170 NYLOC NUT 1/2-13 RING, SNAP PIN STH FRAME SPACER, SIDE MOUNT SHIM, FRAME PIN SPACER, WHEEL TIRE, EZ MOVER JACK, EZ MOVER W/A ARM, EZ MOVER W/A SCREW HHC 1/2-13X1 3/4 WASHER, FLAT 1/2 SAE HARD CRUTCH TIP WASHER, FLAT 1 SAE PLTD WASHER, FLAT 3/8 PLTD STD PIN, COTTER 5/32 QTY.
STH-55JD-TC — WIRING DIAGRAM PAGE 82 — STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
STH-55JD-TC— CONTROL WIRING DIAGRAM STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS Effective: July 1, 2000 PAYMENT TERMS 4. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. Freight is at the sender’s expense.
NOTE PAGE STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV.
PARTS AND OPERATION MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 MULTIQUIP INC.
