User Guide

ManualsBrandsMultiquip ManualsOtherSP605716

PARTS MANUAL

Diamond Back

SP4 "STREET PRO"

PROFESSIONAL SLAB SAW

57 HP DEUTZ DIESEL ENGINE

MODELS

SP605716, SP605720, SP605726

SP605730, SP605736

Revision #0 (03/22/06)

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

To find the latest revision of this

publication, visit our website at:

www.multiquip.com

Summary of content (90 pages)

PAGE 1
PARTS MANUAL Diamond Back SP4 "STREET PRO" PROFESSIONAL SLAB SAW 57 HP DEUTZ DIESEL ENGINE MODELS SP605716, SP605720, SP605726 SP605730, SP605736 Revision #0 (03/22/06) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PAGE 2
SP-6057 CONCRETE SAW — PROPOSITION 65 WARNING PAGE 2 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 3
SP-6057 CONCRETE SAW — SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks.
PAGE 4
TABLE OF CONTENTS MQ SP4 “Street Pro” Professional Slab Saw Proposition 65 Warning ............................................. 2 Silicosis/Respiratory Warnings .................................. 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Explanation Of Codes In Remarks Column .............. 6 Suggested Spare Parts ............................................. 7 Water Pump Kit Assembly ...................
PAGE 5
www.multiquip.com Effective: June 1st, 2005 PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
PAGE 6
SP-6057 — EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. PART NO. PART NAME QTY. 12345 BOLT ....................... 1.... WASHER, 1/4 IN. ...........
PAGE 7
SP-6057 CONCRETE SAW — SUGGESTED SPARE PARTS SP-6057 CONCRETE SAW 1 to 5 Units Qty. ..... P/N ......................... Description 1 ......... 345008 .................... Coupler, Splined 1 ......... 446010 .................... Valve, Cartridge 1 ......... 560028-5 ................. Switch Assembly 1 ......... 521004 .................... V-Belt (16", 20" and 26" only) 1 ......... 521001 .................... V-Belt (30" and 36" only) 1 ......... 521007 .................... V-Belt All Models 2 .........
PAGE 8
SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY. DECK PANEL DECAL ASSY. PAGE 8 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 9
SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY. DECK/GAUGE PANEL ASSY. NO 1 2 PART NO 600151 600152 PART NAME GAUGE PANEL, 6000 SERIES DECK PANEL, 6000 SERIES QTY. 1 1 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 10
SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY. NAMEPLATE AND DECAL ASSY. PAGE 10 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 11
SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY. NAMEPLATE AND DECAL ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO 25250-001 606004 25782 21302 TBD 13118 35137 M600002 22122-001 25249-001 23330-001 25491 20525 604001 25678 PART NAME QTY. REMARKS DECAL, WARNING, KEEP FEET CLEAR 2 DECAL, BLADE GUARD REMOVAL 2 DECAL, MQ DIAMOND LOGO 4 DECAL, WARNING, INSTALL BLADE GUARD ............ 1..............
PAGE 12
SP-6057 CONCRETE SAW — ACCESS PANEL ASSY. ACCESS PANEL ASSY. PAGE 12 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 13
SP-6057 CONCRETE SAW — ACCESS PANEL ASSY. ACCESS PANEL ASSY. NO 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 PART NO 102039 560020 12287 102039-1 577002 29057 10024 10930 29093 PART NAME QTY. REMARKS PANEL ASSY., REAR CONSOLE, RED ........................ 1 ................. INCLUDES ITEMS W/ * LATCH, REAR SAW ACCESS PANEL 2 SCREW, THP 1/4-20 X 3/4" SS 4 PANEL, REAR CONSOLE 6000, RED 1 WEATHER STRIP, REAR SAW ACCESS PANEL 1.75 FT.
PAGE 14
SP-6057 CONCRETE SAW — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 14 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 15
SP-6057 CONCRETE SAW — FUEL TANK ASSY. FUEL TANK ASSY. NO 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 10 11 12 PART NO 140004 29509 19633 368006 35009 19473 35007 446025 25553 102041 933242 0166 PART NAME QTY. REMARK FUEL TANK, 6000 & 6400 10 GAL 1 CAP, FUEL TANK 2.25 DIA, ONE WAY VALVE 1 BUSHING, RUBBER FUEL DAPCO 10672 2 FITTING, FUEL 90 DEG. #4 X #6 BARB 1 HOSE, 22.5" - 5/16" FUEL LINE 1 CLAMP, HOSE WORM # 2 4 HOSE, 26.5" - 1/4" FUEL LINE 1 VALVE, FUEL ON/OFF 1 FUEL TANK ASSY. ...................................
PAGE 16
SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY. LIFT PUMP CIRCUIT ASSY. PAGE 16 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 17
SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY. LIFT PUMP CIRCUIT ASSY.
PAGE 18
SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY. F-N-R CONTROL AND HANDLE ASSY. PAGE 18 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 19
SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY. F-N-R CONTROL AND HANDLE ASSY. NO 1% 2 % * 3 % * 4 % * 5 % * 6 % * 7 % * 8 % * 9 % * 10 % * 12 13% 14% 15% 16 17 18 19 20 21 22 23 24 25 PART NO 560030 560028-6 5600028-8 560028-4 560028-3 560028-5 560028-1 60118 925381 560028-2 25627 405070 12223 405046 6904 580001 440006 120077 565006 915003 584044 2295 440005 933240 PART NAME QTY. REMARK F-N-R CONTROL HANDLE ASSY. ....................... 1 ......................
PAGE 20
SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY. JOYSTICK MOUNTING ASSY. PAGE 20 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 21
SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY. JOYSTICK MOUNTING ASSY. NO 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 PART NO 0161D 10019 1579 2203 405053 442005-6 442006-3 442011 442012 442013 442021 442022 460018 565005 584021 584023 584024 926348 933015 933073 933225 933240 933242 938062 973735 35122 PART NAME QTY. REMARK NUT, HEX FINISH 5/16-18 2 NUT, FYLOC #10-32 1 SCREW. JJC 1/4-20 X .
PAGE 22
SP-6057 CONCRETE SAW — WATER SYSTEM ASSY. WATER SYSTEM ASSY. PAGE 22 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 23
SP-6057 CONCRETE SAW — WATER SYSTEM ASSY. WATER SYSTEM ASSY. NO 1 2 3 4 5 6 7 8 9 PART NO 446004 25827 26496 320009 25931 35087 35085 35086 923143 PART NAME VALVE, BALL, 1/2 BRASS FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT FITTING, 90 1/2MP- 1/2FP FITTING, QD FEM SNAPTITE PHC4 - 4F FITTING, 90 8BARB - 1/2 MP (4390-8-8) HOSE, 3.25" #8LP HOSE, ASM 114.3" #8LP W/25932/25931 HOSE, 17" #8LP SCREW, SHC 10-24 x 3/8" QTY. 2 1 1 1 4 1 1 1 4 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 24
SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY. PULLEY AND V-BELT ASSY. PAGE 24 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 25
SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY. PULLEY AND V-BELT ASSY.
PAGE 26
SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY. DEPTH STOP METER/CABLE ASSY. PAGE 26 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 27
SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY. DEPTH STOP METER/CABLE ASSY. NO 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 16 18 19 20 21 22 23 PART NO 25538 560025 584025 110031 583059 460019 973752 1618 125039 540011 926149 933240 10024 923201 0131 A 1579 120243 923116 160013 13287 440012 565004 PART NAME QTY. REMARKS DEPTH METER ASSY. ...................................................... 1 ......
PAGE 28
SP-6057 CONCRETE SAW — DEPTH STOP CYLINDER/VALVE ASSY. DEPTH STOP CYLINDER/VALVE ASSY. PAGE 28 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 29
SP-6057 CONCRETE SAW — DEPTH STOP CYLINDER/VALVE ASSY. DEPTH STOP CYLINDER/VALVE ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO 25545 169004 966166 965103 583061 25632 446024 446024-1 35006 368817 35004 25675 25776 933247 480003 PART NAME CYLINDER, SAW DEPTH STOP PIN, DEPTH STOP CYLINDER PIN, CLEVIS 3/4 x 2 PIN, COTTER 5/32 x 1 SPACER, DEPTH STOP CYLINDER FITTING, BLEEDER, DEPTH STOP VALVE, DEPTH STOP FLOW CONTROL PANEL MOUNT KIT, VALVE HOSE ASM, 36.
PAGE 30
SP-6057 CONCRETE SAW — BELT GUARD BELT GUARD PAGE 30 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 31
SP-6057 CONCRETE SAW — BELT GUARD BELT GUARD NO 1 2 3 4 5 6 7 PART NO 204017 125041 584011 15503 0166 933242 1023 PART NAME BELT GUARD W/A, CONCRETE SAW (RED) TAB W/A, SAW BELT GUARD WRENCH, 15/16" BLADE CLOSED END KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1 SCREW, HHC 3/8-16 X 7/8 WASHER, FLAT SAE 3/8 GRD 9 YZ SCREW, HHC 3/8-16 X 1 1/4 GR 5 QTY. 1 1 1 1 6 7 1 REMARK SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 32
SP-6057 CONCRETE SAW — ENGINE ASSY. ENGINE ASSY. PAGE 32 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 33
SP-6057 CONCRETE SAW — ENGINE ASSY. ENGINE ASSY. NO. PART NO. 1 261002 1 35396 5 306012 6 304010 7 267002 8 205007 9 367681 10 366030 11 35017 13 946703 15 933242 16 TBD 17 TBD 18 267009 PART NAME QTY. REMARKS ENGINE, DEUTZ BF3L 1011FL 57HP TURBO DIESEL .................... 1........ TIER I ENGINE, DEUTZ BF3L 2011 60HP TURBO DIESEL ........................ 1........
PAGE 34
SP-6057 CONCRETE SAW — AIR INTAKE HOSE ASSY. AIR INTAKE HOSE ASSY. PAGE 34 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 35
SP-6057 CONCRETE SAW — AIR INTAKE HOSE ASSY. AIR INTAKE HOSE ASSY. NO 1 2 3 4 4 5 6 7 8 9 10 11 12 15 16 17 18 19 * 20 * 21 * 22 * 23 PART NO 300010 300007-1 282003 29218 29218 25625 302009 584036 302012 962017 3333 406018 65516 35216 933241 2623 5283 300010-1 300009 300008 300010-2 15538 PART NAME QTY. REMARK AIR CLEANER, DONALDSON, W/90 DEG. BEND .................. 1 .......... INCLUDES ITEMS W/ * BAND, DONALDSON AIR CLEANER 1 PREFILTER, ENGINE AIR 3" 1 CLAMP, HOSE WORM #48 .............................
PAGE 36
SP-6057 CONCRETE SAW — MUFFLER KIT ASSY. MUFFLER KIT ASSY. PAGE 36 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 37
SP-6057 CONCRETE SAW — MUFFLER KIT ASSY MUFFLER KIT ASSY. NO 1 2 3 4 5 6 PART NO 280002 285003 570005 106088 0300 B 280002 PART NAME MUFFLER AND FLEX KIT ASSY. EXHAUST, 12" EXTENSION CLAMP, MUFFLER 2-1/2", 5/16" U-BOLT BRACKET W/A, DEUTZ MUFFLER SUPPORT WASHER, FLAT SAE 5/16 FLEX KIT QTY. 1 1 1 1 2 1 REMARK SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 38
SP-6057 CONCRETE SAW — ENGINE MOUNTING ASSY. ENGINE MOUNTING ASSY. PAGE 38 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 39
SP-6057 CONCRETE SAW — ENGINE MOUNTING ASSY. ENGINE MOUNTING ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 PART NO. 25614 25640 120274 120273 120271 120270 933245 933244 933247 940738 915218 16521 915211 915373 120099-3 938067 936216 583068 9503 35335 PART NAME QTY.
PAGE 40
SP-6057 CONCRETE SAW — POINTER ASSY. POINTER ASSY. PAGE 40 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 41
SP-6057 CONCRETE SAW — POINTER ASSY. POINTER ASSY. NO 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 20 PART NO 120094 120095 110038 110044 15503 500005 160004 582008 995366 5070 B 933241 0202 926006 20473 10133 1456 3233 574003 M10006 PART NAME QTY.
PAGE 42
SP-6057 CONCRETE SAW — GAUGES AND CONTROLS ASSY. GAUGES AND CONTROLS ASSY. PAGE 42 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 43
SP-6057 CONCRETE SAW — GAUGES AND CONTROLS ASSY. GAUGES AND CONTROLS ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 14 15 16 17 18 19 20 21 PART NO 120222 25634 25624 448004-1 448004 M940653 15171 584028 933242 448006 926327 421000 579072 406021 423000 406017-1 406017 406000 406020 PART NAME QTY. REMARK BRACKET, DUETZ THROTTLE CABLE 1 BULK HEAD ADAPTOR 2 SWIVEL, CABLE END 1 SPACER, DEUTZ THROTTLE ACTUATOR ARM 1 ARM, DEUTZ THROTTLE ACTUATOR 1 SCREW, HHC M6-1.0 X 25MM GR10.
PAGE 44
SP-6057 CONCRETE SAW — BATTERY ASSY. BATTERY ASSY. PAGE 44 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 45
SP-6057 CONCRETE SAW — BATTERY ASSY. BATTERY ASSY. NO. PART NO. 1 25597 * 2 * 404006 3 * 125051 1023 4 * 5 * 933242 6 * 206011 7 12832 * 8 * 575001 9 1665 * 10 * 10133 11 25826 12 405061 * 13 * 405060 915101 14 * 15 * 125042 16 A * 0131 17 933240 * 35199 19 20 940692 21 # 35038 * 22 # 35039 * 23 # 35040 * 24 # 35041 * 25 # 35042 * 26 # 35043 * PART NAME QTY.
PAGE 46
SP-6057 CONCRETE SAW — FRONT AXLE ASSY. FRONT AXLE ASSY. PAGE 46 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 47
SP-6057 CONCRETE SAW — FRONT AXLE ASSY. FRONT AXLE ASSY. NO. PART NO. 1 16013-1 2 480003 * 3 2621 4 500006 * 5 * 576003 6 * 460002 7 912311 8 933246 9 4702 10 M16020 11 06505-008 12 508005 13 1579 14 926064 15 583096 16 25599 17 21376 18 1162A PART NAME QTY.
PAGE 48
SP-6057 CONCRETE SAW — DRIVE ASSY. DRIVE ASSY. PAGE 48 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 49
SP-6057 CONCRETE SAW — DRIVE ASSY. DRIVE NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 * 28 * 29 * 30 * 31 * 32 * 33 * 34 * 35 * 36 * 37 * 38 * 39 * 40 * 41 % * 42 % * 43 % * 44 % * 45 % * 46 % * ASSY. PART NO.
PAGE 50
SP-6057 CONCRETE SAW — BLADESHAFT AND MOUNTING ASSY. BLADESHAFT AND MOUNTING ASSY. PAGE 50 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 51
SP-6057 CONCRETE SAW — BLADESHAFT AND MOUNTING ASSY. BLADESHAFT AND MOUNTING ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 35193 BLADESHAFT AND MOUNTING GROUP, 6000 SERIES ......... 1 ...... INCLUDES ITEMS W/ * 2 M15003 BLADESHAFT ASSY., SINGLE SPEED CONCRETE SAW ...... 1 ...... INCLUDES ITEMS W/% * 3 35194 MOUNTING ASSY., 6000 SERIES ............................................ 1 ......
PAGE 52
SP-6057 CONCRETE SAW — LIGHT CONNECTOR/DASH PANEL ASSY. LIGHT CONNECTOR/DASH PANEL ASSY. PAGE 52 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 53
SP-6057 CONCRETE SAW — LIGHT CONNECTOR/DASH PANEL ASSY. LIGHT CONNECTOR/DASH PANEL ASSY. NO. PART NO. PART NAME QTY.
PAGE 54
SP-6057 CONCRETE SAW — ENGINE GUARD ASSY. ENGINE GUARD ASSY. PAGE 54 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 55
SP-6057 CONCRETE SAW — ENGINE GUARD ASSY. ENGINE GUARD ASSY. NO. PART NO. PART NAME 1 205010 GUARD W/A CONCRETE SAW ENGINE 2 2691 SCREW, HHC 1/2-13 X1" 3 933244 WASHER, FLAT SAE 1/2" GRD 9 YZ 4 0166 SCREW, HHC 3/8-16 X 7/8" 5 933242 WASHER, FLAT SAE 3/8" GRD 9 YZ QTY. 1 1 1 2 1 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 56
SP-6057 CONCRETE SAW — BLADE GUARD MOUNT/WIPER ASSY. BLADE GUARD MOUNT/WIPER ASSY. PAGE 56 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 57
SP-6057 CONCRETE SAW — BLADE GUARD MOUNT/WIPER ASSY. BLADE GUARD MOUNT/WIPER ASSY. NO. PART NO. PART NAME 1 206006 STRIPS, SLURRY * 120093 SPACER, RH BLADE CLIP 2 * 3 120091 SPACER, LH BLADE CLIP * 120092 CLIP, RH BLADEGUARD MOUNT 4 * 5 120090 CLIP, LH BLADEGUARD MOUNT * 100019 BACKING PLATE, CONCRETE SAW 6 * 7 5283 NUT, NYLOC 5/16-18 * 0202 SCREW, HHC 5/16-18 X 1 ZINC 8 * 9 924289 SCREW, FHSC 3/8-16 X 1-3/4 * QTY. 2 1 1 1 1 2 8 8 6 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 58
SP-6057 CONCRETE SAW — LOWER BELT GUARD ASSY. LOWER BELT GUARD ASSY. PAGE 58 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 59
SP-6057 CONCRETE SAW — LOWER BELT GUARD ASSY. LOWER BELT GUARD NO. PART NO. 202001 1 * 2 583091 * 583092 3 * 4 933244 * 3214 5 * 6 35198 ASSY. PART NAME QTY. REMARKS GUARD W/A, LOWER BELT 1 STRAP, LOWER BELT GUARD 1 WASHER, LOWER BELT PROTECTOR 1 WASHER, FLAT SAE 1/2 GRD 9 YZ 4 SCREW, HHC 1/2-13 X 1 1/4 4 GUARD, LOWER BELT PROTECTOR KIT, 6000 .................... 1 .......... INCLUDES ITEMS W/ SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 60
SP-6057 CONCRETE SAW — HANDLE AND LIGHT ASSY. HANDLE AND LIGHT ASSY. PAGE 60 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 61
SP-6057 CONCRETE SAW — HANDLE AND LIGHT ASSY. HANDLE AND LIGHT ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 7 8 9 10 * 11 * 12 * 13 14 PART NO. 15503 120206 405001 TBD TBD 560023-1 560024 923199 574002 35359 405002 2532 560017 M18004 PART NAME QTY.
PAGE 62
SP-6057 CONCRETE SAW — REAR POINTER AND FOOT REST ASSY. REAR POINTER AND FOOT REST ASSY. PAGE 62 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 63
SP-6057 CONCRETE SAW — REAR POINTER AND FOOT REST ASSY. REAR POINTER AND FOOT REST ASSY. NO. PART NO. PART NAME 1 560029 FOOT REST 2 933241 WASHER, FLAT 5/16" YZ9 3 0202 SCREW, HHC 5/16"-18 X 1 ZINC 4 110020 REAR POINTER 5 0205 HCS, 3/8-16 X1 QTY. 1 2 2 1 1 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 64
SP-6057 CONCRETE SAW — CONSOLE MOUNTING ASSY. CONSOLE MOUNTING ASSY. PAGE 64 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 65
SP-6057 CONCRETE SAW — CONSOLE MOUNTING ASSY. CONSOLE MOUNTING ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 102040 CONSOLE, 6057 CONCRETE SAW 1 2 100025 FRAME PLATFORM ASSY, 6057 CONCRETE SAW 1 3 M18011 WEIGHT KIT, 6000-6400 SERIES ....................................... 1........
PAGE 66
SP-6057 CONCRETE SAW — CABLE MOUNT ASSY. CABLE MOUNT ASSY. PAGE 66 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 67
SP-6057 CONCRETE SAW — CABLE MOUNT ASSY. CABLE MOUNT ASSY. NO. PART NO. PART NAME 1 35203 CABLE MOUNT GROUP,6000-6400 2 540039 PULLY, POINTER ROPE 3 544002 SHOULDER, ADAPTER 4 125043-3 RETAINER, SAW POINTER CABLE 5 940674 SCREW, HHC M8-1.25 X 30MM GRADE 10.9 6 933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 7 0948 WASHER, FLAT SAE 1/4 8 10136 WASHER, FLAT SAE 3/8 9 939654 SCREW, SHC M12-1.75x30MM 12.
PAGE 68
SP-6057 SAW — OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE) OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE) PAGE 68 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 69
SP-6057 SAW — OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE) OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE) NO. PART NO. PART NAME 1 35030 OPTIONAL FLANGE GUARD, RIGHT-SIDE QTY. 1 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 70
SP-6057 CONCRETE SAW — BLADE GUARD ASSY. BLADE GUARD ASSY. PAGE 70 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 71
SP-6057 CONCRETE SAW — BLADE GUARD ASSY. BLADE GUARD ASSY. NO 1 1 1 1 1 2 3 3 4 4 4 4 4 5 6 7 9 10 11 12 13 13 14 15 16 17 18 19 19 20 PART NO 25916 25917 25918 25919 25920 10176 582040 582039 362000 362005 362006 362007 362008 923144 362003 1618 10930 10024 200019 0131 A 445002 445003 26250 362002 320010 2113 370456 06503-026 06503-030 320009 PART NAME QTY.
PAGE 72
SP-6057 CONCRETE SAW—WIRING HARNESS/CIRCUIT BREAKER ASSY. WIRING HARNESS/CIRCUIT BREAKER ASSY. PAGE 72 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 73
SP-6057 CONCRETE SAW—WIRING HARNESS/CIRCUIT BREAKER ASSY. WIRING HARNESS/CIRCUIT BREAKER ASSY. NO. PART NO. PART NAME 1 933242 WASHER 2 10133 NUT, NYLOC 3/8-16 3 406012 MOUNTING BAR, CIRCUIT BREAKER 4 25935 NUT, HEX 10-32 W/STAR WASHER 5 933076 WASHER, FLAT SAE #12 ZINC 6 923201 SCREW, SHC 1/4-20 X 1/2 7 406019 CIRCUIT BREAKER, 10 AMP QTY. 1 1 1 3 2 2 3 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 74
SP-6057 CONCRETE SAW — WATER PUMP KIT ASSY. WATER PUMP KIT ASSY. PAGE 74 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 75
SP-6057 CONCRETE SAW — WATER PUMP KIT ASSY. WATER PUMP KIT ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 342000 PUMP, WATER JABSCO 1 * 12176 CONNECTOR, WEATHERPACK 2 MALE PIN 1 2 * 3 406000 SWITCH, ROCKER, CH# M-58031-01 1 * 366057 FITTING, BRASS 1/2FP-1MP 2 4 * 5 25931 FITTING, 90 8BARB - 1/2 MP (4390-8-8) 3 * 540003 PULLEY, W/BRG. 4” A SECTION 1 6 * 7 544002 SHOULDER, ADAPTER 1 * 25948 NUT, COUPLING 3/8 - 16 X 1.
PAGE 76
SP-6057 CONCRETE SAW — GLOW PLUG KIT ASSY. GLOW PLUG KIT ASSY. NOte NOTE Tier 1 Engine Only PAGE 76 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 77
SP-6057 CONCRETE SAW — GLOW PLUG KIT ASSY. GLOW PLUG KIT ASSY. NO. PART NO. 1 400000 * 409000 2 * 3 35249 * 25992 4 * 5 2203 * 6 M18007 PART NAME QTY. REMARKS SOLENOID, 12VDC 1 GLOW PLUG 1 CABLE ASM, BATTERY 1 SCREW, SHC 12-24 X 1/2 2 WASHER 2 GLOW PLUG KIT ............................... 1 ...............INCLUDES ITEMS W/ NOTE Tier 1 Engine Only SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 78
SP-6057 CONCRETE SAW — BLADESHAFT SEAL KIT ASSY. BLADESHAFT SEAL KIT ASSY. PAGE 78 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 79
SP-6057 CONCRETE SAW — BLADESHAFT SEAL KIT ASSY. BLADESHAFT SEAL KIT ASSY. NO 1 * 2 * 3 * 4 * 5 * 6 PART NO 576006 925382 480006 480007 578135 TBD PART NAME QTY. REMARKS SNAP RING, SH-196 2 SCREW, SHS 1/4-20 X 1/2 6 SEAL, OIL CR-28655 1 SEAL, OIL CR-19599 2 O-RING, SIZE 135, VITON 2 KIT, SEAL ............................................... 1 ...................... INCLUDES ITEMS W/ SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 80
SP-6057 CONCRETE SAW — BUSHING EXTENSION KITS ASSEMBLY BUSHING EXTENSION KITS ASSEMBLY PAGE 80 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 81
SP-6057 CONCRETE SAW — BUSHING EXTENSION KITS ASSEMBLY BUSHING EXTENSION KITS ASSEMBLY NO. PART NO. PART NAME QTY. REMARKS 1 926949 DOWEL PIN, 3/8" X 2-1/4 1 * 180003 COLLAR, OUTER 1 2 * 3 582032 QD BUSHING, 3/8" - 3/4" 1 * 90123445 5/8"-11 X 4 LH HEX BOLT 1 4 * 5 915319 5/8"-11 X 4 RH HEX BOLT 1 * 6 18501 BUSHING EXTENSION KIT (.375" — .75") ............. 1 ...........
PAGE 82
SP-6057 CONCRETE SAW — ENGINE BLOCK HEATER ASSY. (OPTION) ENGINE BLOCK HEATER ASSY. (OPTION) PAGE 82 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 83
SP-6057 CONCRETE SAW — ENGINE BLOCK HEATER ASSY. (OPTION) ENGINE BLOCK HEATER ASSY. (OPTION) NO. PART NO. PART NAME 1 M18008 HEATER, ENGINE BLOCK, DEUTZ QTY. 1 REMARKS SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 84
SP-6057 CONCRETE SAW — COLLAR/FLANGE PULLER ASSY. (OPTION) COLLAR/FLANGE PULLER (OPTION) PAGE 84 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 85
SP-6057 CONCRETE SAW — COLLAR/FLANGE PULLER ASSY. (OPTION) COLLAR/FLANGE PULLER (OPTION) NO. PART NO. PART NAME QTY. REMARKS 584037 OUTER PULLER 1 1 * 2 584038 PLATE, PULLER 1 * 2549 SCREW, HHC 1/2"-13 X3 2 3 * 4 25138 SCREW, HHC 5/8"-11 X5 TAP 1 * 5 18503 COLLAR/FLANGE PULLER ASSY. ... 1 ...............INCLUDES ITEMS W/ SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 86
SP-6057 CONCRETE SAW — SEAL SLEEVE PULLER ASSY. (OPTION) COLLAR/FLANGE PULLER (OPTION) PAGE 86 — SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 87
SP-6057 CONCRETE SAW — SEAL SLEEVE PULLER ASSY. (OPTION) COLLAR/FLANGE PULLER (OPTION) NO. PART NO. PART NAME QTY. REMARKS 1 35163 SCREW, HHC 3/8 – 16 X 4 FULL THREAD 1 2 M18505 SEAL SLEEVE & THRUST WASHER PULLER ASSY. ....... 1 ...........
PAGE 88
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
PAGE 89
NOTE PAGE SP-6000 SERIES SAWS — PARTS MANUAL — REV.
PAGE 90
PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.com Mayco Parts 800-306-2926 Fax: 800-672-7877 310-537-3700 Fax: 310-637-3284 Service Department 800-421-1244 Fax: 310-537-4259 310-537-3700 MQ Parts Department 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-421-1244, Ext.