OPERATION & PARTS MANUAL SERIES MODEL MVH-200DA2 REVERSIBLE PLATE COMPACTOR (YANMAR L70V6 DIESEL ENGINE) Revision #0 (01/27/06) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PAGE 2 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
NOTE PAGE MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — TABLE OF CONTENTS MQ MIKASA SERIES MVH-200DA2 PLATE COMPACTOR YANMAR L70V6GJ1R1AAS5 ENGINE Proposition 65 Warning ............................................. 2 Here’s How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Specifications ............................................................ 6 Dimensions ..................................
www.multiquip.com Effective: June 1st, 2005 MVH-200DA2 — PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
MVH-200DA2 — SPECIFICATIONS Table 1. MVH-200DA2 REVERSIBLE PLATE COMPACTOR SPECIFICATIONS Centrifugal Force 7,056 lbs. (3,200 kg) Vibration Frequency 5,200 vpm Maximum Forward Speed 75 ft/min (23 m/min) Plate Size (L x W) 27.6 x 20 in (70 x 51 cm) Operating Weight 449 lbs. (204 kg) Maximum Area Capacity 7,515 sq. ft/hr (698 sq. m/hr) HP Rating 6.7 BHP (4.9 kW) TABLE 2.
MVH-200DA2 — DIMENSIONS Figure 1. MVH-200DA2 Reversible Plate Compactor Dimensions TABLE 3. DIMENSIONS REFERENCE LETTER DIMENSIONS IN. (MM) A 49 in. (1245 mm.) B 21 in. (533 mm.) C 26.5 in. (673 mm.) D 48 in. (1219 mm.) E 31 in. (787 mm.) MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model MVH-200DA2 Reversible Plate Compactor.
MVH-200DA2 — SAFETY MESSAGE ALERT SYMBOLS CAUTION - Rotating Parts CAUTION - Equipment Damage Messages NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. Other important messages are provided throughout this manual to help prevent damage to your light tower, other property, or the surrounding environment.
MVH-200DA2 — RULES FOR SAFE OPERATION DANGER Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the compactor: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual. ■ This equipment should not be operated by persons under 18 years of age.
MVH-200DA2 — RULES FOR SAFE OPERATION Loading and Unloading (Crane): ■ Before lifting, make sure that machine parts (hook and vibration insulator) are not damaged and screws are not loosened or lost. ■ Always make sure crane or lifting device has been properly secured to the hook of guard frame on compactor. ■ NEVER lift the machine while the engine is running. ■ Use adequate lifting cable (wire or rope) of sufficient strength. ■ Use one point suspension hook and lift straight upwards.
MVH-200DA2 — OPERATION AND SAFETY DECALS Figure 2 displays the operation and safety decals as they appear on the reversible plate compactor. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set. Figure 2. Operation and Safety Decals PAGE 12 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — FEATURES Plate Compactor Frequency/Speed The Mikasa MVH-200DA2 is a walk-behind, reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
MVH-200DA2 — PLATE COMPACTOR COMPONENTS Figure 3. MVH-200DA2 Components Figure 3 illustrates the location of the major components for the 6. MVH-200DA2 Reversible Plate Compactor. The function of each component is described below: Engine –This plate compactor uses a YANMAR L70V6 engine. Refer to the owner’s manual for engine information and related topics. 7. Belt Cover – Remove this cover to gain access to the Vbelts. NEVER run the compactor without the V-belt cover.
MVH-200DA2 — ENGINE COMPONENTS Figure 4. Engine Controls and Components 6. Recoil Starter– Manual-starting method. Pull the starter grip until resistance is felt, then pull briskly and smoothly. 7. Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element. Oil Filler Cap / Dipstick – Remove this cap to add oil to the engine crankcase. Read dipstick to determine if oil level is low. DO NOT over fill.
MVH-200DA2 — PRE-INSPECTION CAUTION - General Safety Precautions NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 1.16 quarts (1.1 liters).
MVH-200DA2 — START-UP PROCEDURE This section is intended to assist the operator with the initial start-up of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field. 4. Push down the decompression lever (Figure 10) and release. Starting the Engine (Yanmar engine): 1. Open the fuel cock (Figure 7). Figure 10. Decompression Lever 5. If the engine does not start, repeat steps 3 and 4. Shut-Down Procedure: Figure 7. Fuel Cock 2.
MVH-200DA2 — OPERATION To Turn The Compactor: Traveling: 1. Grasp the compactor's hand grip and move the throttle lever 1. Move the travel lever to the NEUTRAL position. (Figure 12) quickly to the fast position.The compactor will not 2. Hold the hand grip firmly and turn the compactor in the desired direction. DO NOT swing compactor while gripping the travel operate correctly until the engine speed is high enough to lever. engage the centrifigal clutch (approximately 2300 RPMs).
MVH-200DA2 — OPERATION Stowing the Handle: Lifting: 1. Push up the handle (Figure 15). 1. Use a crane or lift to load and unload the machine. A skilled crane operator is required to perform the job. 2. Pull the stopper grip upward into the hole of the guard frame to lock the handle. 2. When lifting the machine, check for any damaged or loose bolts, lifting hooks, and shock mounts. 3. Check any damaged or loose bolts in the guard frame to avoid machine sliding off. 4.
MVH-200DA2 — MAINTENANCE CAUTION - General Maintenance Safety Inspection and other services should always be carried out on hard and level ground with the engine shutdown. TABLE 6.
MVH-200DA2 — MAINTENANCE Engine Oil Replacement: 1. Replace engine oil, first in 25 hours of operation and every 50 to 100 hours afterwards. 2. Drain the engine oil when the oil is warm as shown in Figure 16. 3. Clean foam element in warm, soapy water or nonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engine oil and completely squeeze out the excess oil from the element before installing. Figure 17. Engine Air Filter Figure 16. Engine Oil (Draining) 3.
MVH-200DA2 — MAINTENANCE Checking and Replacing the V-Belt and Clutch: Checking the Clutch After 200 hours of operation, remove the belt cover to check the V-belt tension (Figure 19). 1. With belt cover removed, visually check outer drum of the clutch for seizure and "V" groove for wear or damage. 2. Clean the "V" groove as necessary. 3. Check the clutch lining and shoe for signs of wear. If the shoe is worn, replace the clutch to prevent deficient power transmission and slippage. Replacing the Clutch 1.
MVH-200DA2 — MAINTENANCE CAUTION - Filling the Hydraulic Oil Reservoir Make sure hydraulic oil i is at a normal safe operating level. DO NOT over fill. Over filling (excessive oil) will cause excess oil to blow out of breather plug. Replacing Hydraulic Oil 1. Remove the hydraulic hoses (left and right) which enters the cylinder of the vibrator from the hydraulic pump and move the travel lever back and forth to drain the hydraulic oil from the pump. 2.
MVH-200DA2 — MAINTENANCE 6. Filling the reverse travel circuit with oil. a. With the travel lever pushed forward (hydraulic circuit is connected with reverse travel circuit), add oil into pump and remove bleed plug of vibrator cylinder (opposite of belt cover side). In a few seconds, oil will come out of bleed plug. DANGER - Explosive Fuel Diesel fuel is highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling.
MVH-200DA2 — ENGINE TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take remedial action following the diagnosis based on the Engine Troubleshooting Table (Table 8) information shown below and on the following page. If the problem cannot be remedied, please leave the unit as it is and consult Multiquip’s business office or service plant. TABLE 8.
MVH-200DA2 — PLATE COMPACTOR TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take remedial action following the diagnosis based on the Compactor Troubleshooting Table (Table 9) information shown below. If the problem cannot be remedied, please leave the unit as it is and consult Multiquip’s business office or service plant. TABLE 9.
NOTE PAGE MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2— EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed. PART NO. PART NAME QTY. 12345 BOLT ....................... 1 .... WASHER, 1/4 IN. ...........
SUGGESTED SPARE PARTS MQ MIKASA MVH-200DA2 1 to 3 Units W/YANMAR L70V6 ENGINE Qty. P/N Description 3 ......... 070200323 ....... V-BELTS 2 ......... 956100038 ....... THROTTLE WIRE 3 ......... 11465012591 ... ELEMENT, A/C 1 ......... 11428855041 ... CAP, FUEL TANK 1 ......... 11487076630 ... ROPE, RECOIL STARTER 2 ......... 11425035110 ... STRAINER, OIL LUB W/ O-RING 2 ......... 11425055121 ... FILTER, FUEL OIL 1 ......... 11425055100 ...
MVH-200DA2 — DECAL PLACEMENT BODY ASSY. PAGE 30 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — DECALS PLACEMENT BODY ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 920203260 920204230 920203330 920202220 920204580 920204040 920203290 920203560 920206280 920206290 TBD 920206880 PART NAME QTY. REMARKS DECAL, OIL TANK 1 DECAL, TRAVEL LEVER OP.
MVH-200DA2 — BODY ASSY. BODY ASSY. PAGE 32 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — BODY ASSY. BODY ASSY.
MVH-200DA2 — VIBRATION ASSY. VIBRATION ASSY. PAGE 34 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — VIBRATION ASSY. VIBRATION ASSY.
MVH-200DA2 — VIBRATION ASSY. (CONT.) VIBRATION ASSY. (CONT.) PAGE 36 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — VIBRATION ASSY. (CONT.) VIBRATION ASSY. (CONT.
MVH-200DA2 — CONTROL ( A-TYPE ) ASSY. CONTROL ( A-TYPE ) ASSY. PAGE 38 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — CONTROL ( A-TYPE ) ASSY. CONTROL ( A-TYPE ) ASSY.
MVH-200DA2 — PUMP ( A-TYPE ) ASSY. PUMP ( A-TYPE ) ASSY. PAGE 40 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — PUMP ( A-TYPE ) ASSY. PUMP NO A B * C * 1 * 2$ * 3$ * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18# * 19 #$ * 20# * 21# * 22 #$ * 22 #$ * 23 * 23-1 $ * 24 * 25 * 26 * 27 * 28 * 29 * 30 * 31 #$ * 32 * 33 * 34 * ( A-TYPE ) ASSY.
MVH-200DA2 — THROTTLE LEVER ( A-TYPE ) ASSY. THROTTLE ( A-TYPE ) ASSY. PAGE 42 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
MVH-200DA2 — THROTTLE LEVER ( A-TYPE ) ASSY. THROTTLE ( A-TYPE ) ASSY. NO PART NO PART NAME 1 956200010 THROTTLE LEVER ASSY. 103F/SX 2 092008016 SCREW 8 X 16 2 092008025 SCREW 8 X 25 3 030208200 WASHER, LOCK 8MM 4 020108060 NUT M8 5 455435000 SPACER 7 X 9.
YANMAR L70V6 ENGINE— CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. PAGE 44 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. NO. 1 5 11 12 23 24 25 26 27 28 29 30 31 32 35 35 35 37 38 39 40 42 43 44 45 46 47 48 49 52 PART NO.
YANMAR L70V6 ENGINE— CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 46 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6— CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 3 7 8 9 10 11 13 14# 15# 16# 18 19 20# 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 * 40 ** 42 45 PART NO.
YANMAR L70V6 ENGINE— AIR CLEANER ASSY. AIR CLEANER PAGE 48 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 * 3 * 4 * 6 * 7 * 10 * 11 12 13 14 PART NO. 11421012510 11421012020 11421012520 11421012560 11421012580 11421012590 11421012600 11429912300 11421012210 26106060202 26226060302 PART NAME QTY. REMARKS AIR CLEANER ASSY. ..................................... 1 ......... INCLUDES ITEMS W/ * AIR CLEANER BODY 1 AIR CLEANER COVER 1 WING NUT 1 STUD BOLT 1 ELEMENT ASSY.
YANMAR L70V6 ENGINE— MUFFLER ASSY. MUFFLER ASSY. PAGE 50 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— MUFFLER ASSY. MUFFLER ASSY. NO. 15 16 22 23 24 25 PART NO. 11429913200 11439913520 26106060142 26216080182 26366080002 11429913800 PART NAME MUFFLER GASKET MUFFLER ASSY. BOLT M 6X14 PLATED STUD M 8X18 PLATED NUT M8 EXHAUST DEFECTOR QTY. 1 1 2 2 2 1 REMARKS MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— CRANKSHAFT AND CAMSHAFT ASSY. CRANKSHAFT AND CAMSHAFT ASSY. PAGE 52 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— CRANKSHAFT AND CAMSHAFT ASSY. CRANKSHAFT AND CAMSHAFT ASSY. NO. 1 6 7 12 13 21 22 25 * 26 27 45 62 63 64 65 PART NO. 71421014580 11421014200 11421014300 11421014400 71421021740 11428821220 11439921590 11436221600 11429921550 22512040120 71421028510 26106080202 16031014550 22512070360 24101062030 PART NAME QTY. REMARKS CAMSHAFT ASSY. 1 TAPPET 2 ROLLER TAPPET ASSY. 1 PUSH ROD ASSY. 2 CRANKSHAFT (D) ASSY. 1 NUT 1 FLYWHEEL (DE) ASSY. .................................. 1 .........
YANMAR L70V6 ENGINE— PISTON ASSY. PISTON ASSY. PAGE 54 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— PISTON ASSY. PISTON ASSY. NO. 28 28 28 30# 30# 30# 36 37 38 41 * 42 * 42 * 42 * 44 * PART NO. 71421022720 71421022620 71421022580 71487022502 71487022542 71487022552 11439922300 22252000210 71421023700 11820023200 11421023600 11421023610 11421023620 11438023100 PART NAME QTY. REMARKS PISTON W/ RINGS STD ................................. 1 ......... INCLUDES ITEMS W/# PISTON W/RINGS OS=0.25 ........................... 1 ......... INCLUDES ITEMS W/# PISTON W/RINGS OS=0.50 .............
YANMAR L70V6 ENGINE— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP & GOVERNOR ASSY. PAGE 56 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP AND GOVERNOR ASSY. NO. 1 7 8 9 10 11 13 * 14 15 27# 32# 35 36+ 41 42 43# 44 45 46 47 48 49 50 51# 52 54 55 56 57 58 59 60 61 62 63 65% 66% PART NO.
YANMAR L70V6 ENGINE— COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. PAGE 58 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 * 28 * 29 * 30 31 32 PART NO.
YANMAR L70V6 ENGINE— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. PAGE 60 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
L70V6 ENGINE — FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. NO. 1 2 * 3 * 4 * 10 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 19# 20 21 23# 24# 25# 26# 27# 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 PART NO.
YANMAR L70V6 ENGINE— FUEL TANK & FUEL LINE ASSY. FUEL TANK AND FUEL LINE ASSY. PAGE 62 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE — FUEL TANK AND FUEL LINE ASSY. FUEL TANK AND FUEL LINE ASSY. NO. 1 3 * 4 * 5 * 7+ 8 9 * 10 11# 12 13 14 15 16 17 18 19 20 21 22% 23% 24% 25% 26 27> 28> 29 35 PART NO.
YANMAR L70V6 ENGINE— STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR AND DYNAMO ASSY. PAGE 64 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR & DYNAMO ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 # * 9 # * 10# 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 20 21 22> 23> 24 25 26> 27 28 30+ 31+ 32+ 33% 34+ 35 36 37 PART NO.
YANMAR L70V6— TOOLS, LABELS AND GASKETS SET ASSY. TOOLS, LABELS AND GASKET SET ASSY. PAGE 66 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— TOOLS, LABELS AND GASKETS SET ASSY. TOOLS, LABELS AND GASKET SET ASSY. NO. 3 4 5 6 7 8 11 12 * 13 * 14 * 15 * 16 * 17 18 # 24 # 25 # 26 # 27 # 28 # 29 # 30 # 31 # 32 # 33 # 34 # 35 # 36 # 37 # 38 # PART NO.
YANMAR L70V6 ENGINE— ACCESSORIES ACCESSORIES PAGE 68 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
YANMAR L70V6 ENGINE— ACCESSORIES ACCESSORIES NO. 1 3 4 5 6 PART NO. 11424913600 11425213910 11425213960 16071078710 10519878570 PART NAME EXHAUST PIPE ASSY. CLAMP SCREW M6X25 CORD CLAMP WIRE HARNESS (C) QTY. 1 1 1 1 1 REMARKS MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS Effective: October 1, 2002 PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.com Mayco Parts 800-306-2926 Fax: 800-672-7877 310-537-3700 Fax: 310-637-3284 Service Department 800-421-1244 Fax: 310-537-4259 310-537-3700 MQ Parts Department 800-427-1244 310-537-3700 MEXICO UNITED KINGDOM MQ Cipsa Carr. Fed. Mexico-Puebla KM 126.
