Spec Sheet

5
The MQ600TD80 pump is a high performance wet prime (self-priming) 6” trash pump capable of moving
96,000 GPH ow. Its pump end engineering, diesel power plant, and selected material design provides
trusted output and long service life. The pump comes mounted on a rugged skid, or optional DOT certied
mobile trailer.
PERFORMANCE
• 6” Suction/Discharge • 1,600 GPM / 150’ HEAD
• 64.9 psi • Passes up to 3” solids
PUMP CASING
Abrasion and pressure resistant grey cast iron Number 30
(30,000 psi tensile strength)
SUCTION/DISCHARGE PORT
Cast iron, female 6” NPT thread w/ multi-directional 90° orientation
VOLUTE
Easily removable cast iron with dual passage design to ensure fast
priming, minimal clogging, and enhanced ow efciency
IMPELLER
Multi-vane open type that is dynamically and statically balanced
capable of passing 3” spherical solids. Made of cast (#45) ductile iron
to ensure a high level of abrasion resistance
MECHANICAL SEAL
Self-aligning; made of tough silicon carbon for long service life.
Oil-lubricated with stainless steel components, easy service port w/
sight gauge
PUMP MOUNTING
Models are available on rugged skid or DOT certied trailers with 40
gallon fuel tank. A lifting bail is standard.
MQ600TD80-TLRB shown with trailer
and 40 gal fuel tank
MQ600TD80 shown with
40 gal fuel tank
DIESEL POWERED
The MQ600TD80 features a LOFA solid state control box. Weather resistant
enclosure features oil pressure, tachometer, ammeter and
temperature gauges. LED diagnostic panel and shutdowns for low oil
pressure and high engine temperature are standard.