OPERATION AND PARTS MANUAL J-SERIES WALK-BEHIND TROWEL Revision #6 (09/30/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL— TABLE OF CONTENTS Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Training Checklist ...................................................... 6 Daily Pre-Operation Checklist ................................... 7 Safety Message Alert Symbols .............................. 8-9 Rules For Safe Operation ................................
www.multiquip.com J-SERIES TROWEL— PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com.
J-SERIES TROWEL— TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and gearbox fluid level.
J-SERIES TROWEL— DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine Oil Level. 2 Gearbox Fluid Level. 3 Condition of Blades. 4 Blade Pitch Operation. 5 Safety Kill Switch Operation. 6 Clutch Operation COMMENTS: J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the MQ Whiteman J-SERIES TROWEL.
J-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. NOTE This walk-behind trowel, other property, or the surrounding environment could be damaged if you do not follow instructions.
J-SERIES TROWEL— RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the J-Series walk-behind power trowel. SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
J-SERIES TROWEL— RULES FOR SAFE OPERATION ■ DO NOT operate this trowel unless all guards and safety devices are attached and in place. See Pages 16 and 17. ■ ALWAYS use proper lifting techniques when moving the trowel. ■ ALWAYS check to make sure that the operating area is clear before starting the engine. ■ ALWAYS test the safety kill switch devices before operating the trowel. ■ NEVER place your feet or hands inside the guard rings while starting or operating this equipment.
J-SERIES TROWEL— OPERATION AND SAFETY DECALS Machine Safety Decals The J-Series walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. Figure 1. J-Series Trowel Decals PAGE 12 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL— SPECIFICATIONS (TROWEL) Side View Figure 2. J-Series Trowel Dimensions Table 1. J-Series Trowel Specifications A– Height (Lifting Hook) 36.7 in (931.6 mm) B– Height (Engagement Lever) 41.4 in (1,044.2 mm) 36.5 in. (927.1 mm) C–Width 70.5 in. (1,789.4 mm) D–Length Weight – Operating 150 lb. (330 kg.) Sound Pressure 94 db Vibration 2.0g (19.6 m/s2) Blade Speed (max) 129 rpm @ 4000 Blade Tip Speed 1,182 fpm (6.0 m/s) NOTE: 1. Sound pressure is a weighted measure.
J-SERIES TROWEL— SPECIFICATIONS (ENGINES & ELECTRIC MOTOR ) Table 2. Specifications (Engines & Electric Motor) Model HONDA GX-160QA2 Electric Motor Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine N/A Bore X Stroke 2.7 in. x 1.8 in. (68 mm x 45 mm) N/A Displacement 163 cc (9.9 cu-in) N/A 5.0 H.P./3600 R.P.M. 2.0 HP Approx. 0.95 U.S. gallons (3.6 liters) N/A Unleaded Automobile Gasoline N/A .60 liters (0.
J-SERIES TROWEL— GENERAL INFORMATION J-Series Walk-Behind Trowel Familiarization Blades This walk-behind trowel is designed for the floating and finishing of concrete slabs. The blades of the trowel finish the concrete as they are rotated around the surface. Blades are classified as combination (8 inches wide), float (10 or 8 inches wide), and finish (6 inches wide).
J-SERIES TROWEL— CONTROLS AND COMPONENTS Figure 3. J-Series Walk-Behind Trowels PAGE 16 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL— CONTROLS AND COMPONENTS Figures 3 shows the location of the basic controls or components, for the J-Series trowel. Listed below is a brief explanation of each control or component 1. 2. 3. Quick Pitch™ Control Handle – To adjust the pitch of the blades, grasp the handle then squeeze and either move the handle forward or backward to achieve the desired blade pitch. Throttle Control Lever – Controls the speed of the engine.
J-SERIES TROWEL— BASIC ENGINE HONDA engine shown. Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. 1. 5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. 6.
J-SERIES TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Quick Pitch™ Handle Installation (Quick Pitch Models Only) Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section explains how to install those components. CAUTION The Quick Pitch™ handle is spring loaded, personal injury or damage could result from improper handling or installation. Be careful when installing this component.
J-SERIES TROWEL — ASSEMBLY AND INSTALLATION 3. Remove one brass set nut from the Quick Pitch™ cable end as shown in Figure 7. 4. Thread the second brass set nut towards the cable as far as possible. Pre-load Adjustment (Quick Pitch™ Models Only) 1. After the Quick Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required. 2. Locate the adjustment screw on the underside of the handle tube (Figure 9). Figure 7. Quick Pitch™ Cable 5.
J-SERIES TROWEL — ASSEMBLY AND INSTALLATION 2. On ROBIN engines, the hook-on the engine end of the throttle wire must be removed. Make the cut as shown in Figure 11. The HONDA engine will not require this modification to the throttle cable. 5. Connect the throttle cable to the engine. Keep in mind there should be a piece of wire installed on the trowel to show you where to route the throttle cable. When connecting the cable housing, make sure that no more than 1/4" (6.
J-SERIES TROWEL— PRE-INSPECTION CAUTION NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the trowel. NEVER place hands or feet inside the guard rings while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel. Figure 15. Engine Oil Dipstick (Removal) 3.
J-SERIES TROWEL— PRE-INSPECTION Explosive Fuel V-belt Check A worn or damaged V-belt can adversely affect the performance of the trowel. If a V-belt is defective or worn simply replace the Vbelt as outlined in the maintenance section of this manual. Fuel Check Blade Check Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running. Check for worn or damaged blades.
J-SERIES TROWEL — INITIAL START-UP (GASOLINE ENGINE) CAUTION The trowel is heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT lift the trowel by the guard rings. Lifting the Trowel Onto a Slab. Auxiliary Lifting Tube Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox (Figure 19) from the handle. Make sure that the hole in the tube engages with the pin in the socket.
J-SERIES TROWEL — INITIAL START-UP (GASOLINE ENGINE) 3. Place the centrifugal kill switch (Figure 22) in the "ON" position. For models that use this feature. 6. If the engine has started, slowly return the choke lever (Figure 23) to the CLOSED position. If the engine has not started repeat steps 1 through 5. NEVER disable or disconnect the centrifugal kill switch. It is provided for the operators’ safety and injury may result if it is disabled, disconnected or improperly maintained. 7.
J-SERIES TROWEL — INITIAL START-UP (ELECTRIC MOTOR) Starting The Electric Motor (Single Phase 115/230 Volts) The electric motor used on the B-Series trowel has two operating voltages: ■ 115 VAC Single Phase, 2 Horsepower ■ 230 VAC Single Phase, 2 horsepower 4. Squeeze the micro-switch lever ( Figure 26) to begin troweling. This lever will act an emergency stop switch. When this lever is released, voltage to the electric motor will be interrupted. When this lever is squeezed the voltage will resume.
J-SERIES TROWEL — OPERATION The following steps are intended as a basic guide to machine operation, and are not to be considered a complete guide to concrete finishing. We suggest that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit, Michigan. Read the “Training” section of this manual for more information. Pitching The Blades. Quick Pitch Handle 1.
J-SERIES TROWEL — OPERATION Figure 31 below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel. The trick is to let the trowel do the work. Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area. Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided. The best way to get accustomed to the trowel is repeated use.
J-SERIES TROWEL — OPTIONS Clip-On Float Blades (Optional) Blades NOTE Blades should be changed when they fail to Specification and part number finishare concrete in atosatisfactory manner. subject change without notice. Blades are a vital part of finishing concrete. This Whiteman finisher has been designed to finish concrete and are built to stringent quality standards out of the finest trowel steel.
J-SERIES TROWEL — OPTIONS Grinding Attachments Trowel Arm Adjustment Tool Available grinding attachments are used for grinding surface imperfections or joints. These attachments allow greater utilization of your trowel. Figure 36 illustrates a typical grinding disk assembly, complete with hub and stone mounting plate. If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted.
J-SERIES TROWEL — MAINTENANCE Trowel Arm adjustment Procedure NOTE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. At the front of the book (Page 7) there is a “Daily Pre-Operation Checklist ”. Make copies of this checklist and use it on a daily basis. CAUTION! ALWAYS allow the engine to cool before servicing. NEVER attempt any maintenance work on a hot! engine. MAINTENANCE SCHEDULE Daily (8-10 Hours) 1.
J-SERIES TROWEL — MAINTENANCE 2. Start engine, and bring trowel blades up to full speed and look for the following conditions: ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? Spider Removal b. Loosen the jam nut and cone point square head set screw, and carefully lift the upper trowel assembly off of the spider assembly.
J-SERIES TROWEL — MAINTENANCE 3. Should the trowel arm inserts (bronze bushing ) come out with the trowel arm, remove the bushing from the trowel arm and set aside in a safe place. If the bushing is retained inside the spider plate, carefully remove the bushing. 4. Examine the bronze trowel arm bushing insert (Figure 44), clean if necessary. Replace bushing if out of round or worn. Trowel Arm Flatness Test 1.
J-SERIES TROWEL — MAINTENANCE Trowel Arm Adjustment Shown in Figure 47 is the adjustment fixture with a trowel arm inserted. As each trowel arm is locked into the fixture, the arm bolt is adjusted to where it contacts a stop on the fixture. This will consistently adjust all of the trowel arms, keeping the finisher as flat and evenly pitched as possible. 1. Locate the trowel arm adjustment tool P/N 1817.
J-SERIES TROWEL — MAINTENANCE 10. Carefully lift the upper trowel assembly, line up the keyway on gear box main shaft and insert into spider assembly 11. Reinstall square head cone point into spider plate and tighten in place. Tighten jam nut. Use care in making sure point of set screw engages groove in gear box main shaft. 12. Lubricate all grease points (zerk fittings) with premium "Lithum 12" based grease, conforming to NLG1 Grade #2 consistency. Testing 1.
J-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety kill switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Kill switch malfunction? Make sure that the kill switch is ON or replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine.
J-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING (CONTINUED) SYMPTOM Clutch slipping or sluggish response to engine speed change. POSSIBLE PROBLEM SOLUTION Worn V-belts? Replace V-belt Dir ty centrifugal clutch? Disassemble and clean clutch. Defective or worn out centrifugal clutch? Replace entire clutch. Hand clutch out of adjustment? Adjust per instructions in maintenance section of this manual. Worn or fefective hand clutch par ts? Replace par ts as necessary.
J-SERIES TROWEL — TROUBLESHOOTING (ENGINE) TABLE 7. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". Difficult to star t, "fuel is available, and SPARK is present at the spark plug". Difficult to star t, "fuel is available, spark is present and compression is normal" Difficult to star t, "fuel is available, spark is present and compression is low" POSSIBLE CAUSE SOLUTION Spark plug bridging? Check gap, insulation or replace spark plug.
NOTE PAGE J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — EXPLANATION OF CODES IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT..............
J-SERIES TROWEL — SUGGESTED SPARE PARTS J-SERIES TROWEL 1 TO 3 UNITS WITH HONDA GX160QA2 ENGINE. 1 to 3 Units Qty. ........ P/N .............................. Description 3 ............ 0189 ...................... GRIP 2 ............ 1103 ...................... SAFETY SWITCH 2 ............ 1727 ...................... QUICK PITCH SAFETY SWITCH 1 ............ 1115 ...................... CABLE STANDARD HANDLE 1 ............ 1714 ...................... CABLE QUICK PITCH 1 ............ 0302 ....................
J-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS PAGE 42 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 9 10 * 11 * 12 13 14 * 15 * PART NO. 1734 1755 12405 1758 1499 1735 1492 1261 11247 11246 11246 1940 11246 11246 12620 PART NAME QTY.
J-SERIES TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. PAGE 44 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. NO. PART NO.
J-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH ™ T-HANDLE ASSY. PAGE 46 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH ™ T-HANDLE ASSY. NO. PART NO.
J-SERIES TROWEL — THRUST BEARING KIT ASSY. THRUST BEARING KIT ASSY. PAGE 48 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — THRUST BEARING KIT ASSY. THRUST BEARING KIT ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 PART NO. 12208 12778 10793 1471 1154A 10968 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR W/BUSHING 1 BUSHING 1 LOWER WEAR PLATE 1 THRUST BEARING KIT .................................................... 1............ INCLUDES ITEMS W/ * J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — 3 AND 4-BLADE SPIDER ASSY. 3 AND 4 BLADE SPIDER ASSY. PAGE 50 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — 3 AND 4-BLADE SPIDER ASSY. 3 AND 4 BLADE SPIDER ASSY. NO. 1 * 2 * 3 * 4 * 5%$ 6%$ 7%$ 8%$ 9%$ 10%$ 11%+ 12 13%$ 14%$ 15%$ 16$ 17%$ 18%$ 19%$ 20%$ 21 21 22%$ 23 24 # * PART NO. 12208 12778 10793 1154A 1157A 0164B 1875 1876 0105 0161C 1156 2826 1163 4164 1316 1161 1322 1456 1167A 0166A 1210 1215 1162A 10968 1471 PART NAME QTY. REMARKS WEAR RING 1 CHECK P/N 1803 FLANGE BEARING 1 THRUST COLLAR ................................................................ 1 ........
J-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. PAGE 52 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. NO. PART NO.
J-SERIES TROWEL — ENGINES, 5.0 HP HONDA,4.6 HP ROBIN, 3&5 HPB&S ENGINES, 5.0 HP HONDA, 4.6 HP ROBIN, & 3&5 HP BRIGGS AND STRATTON PAGE 54 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — ENGINES, 5.0 HP HONDA,4.6 HP ROBIN, 3&5 HPB&S ENGINES, 5.0 HP HONDA, 4.6 HP ROBIN, & 3&5 HP BRIGGS AND STRATTON NO. 1 1 2 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 29 * * * * * * * * PART NO. 0627 0255 0256 0251 0458 0454 0855 0253 1868 0456 1390 1243 1335 0181B 2577 0740 10181 0161C 0300B 1406 1403 1391 2742 1393 0939 PART NAME QTY. REMARKS ENGINE 3 HP BRIGS & STRATTON 1 ENGINE 5 HP BRIGS & STRATTON 1 SQUARE KEY 3/16 X 3/16X1.1/4" 1 AUTOMATIC CLUTCH ASSY.
J-SERIES TROWEL — HAND CLUTCH ASSY. - S/N LJ42036 AND BELOW HAND CLUTCH ASSY.-S/N LJ42036 AND BELOW PAGE 56 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — HAND CLUTCH ASSY. - S/N LJ42036 AND BELOW HAND CLUTCH ASSY.-S/N LJ42036 AND BELOW NO. 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 13 14 15 16 17 17 18 18 19 20 21 PART NO. PART NAME 0939 0939 1512 10086 C8202 5117 5133 1063 0478 2805 10102 10096 0740 2454 0181B 4514 1847 2865 2863 1390 2343 2491 10450 2267 ENGINE 5HP HONDA ENGINE 5HP B&S ENGINE 4.
J-SERIES TROWEL — HAND CLUTCH ASSY. - S/N LJ42037 AND ABOVE HAND CLUTCH ASSY.-S/N LJ42037 AND ABOVE PAGE 58 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — HAND CLUTCH ASSY. - S/N LJ42037 AND ABOVE HAND CLUTCH ASSY.-S/N LJ42037 AND ABOVE NO. 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 18 19 20 21 22 23 24 25 26 27 PART NO. PART NAME 10036 6014C 0300B 10181 10450 0948 0181B 1579 10936 4538 11043 1512 10831 11046 0730 11044 11049 0740 10229 0161C 10897 1284 10935 10740 1456 10820 0949 ENGINE 5 HP HONDA ENGINE 4 HP ROBIN ENGINE 5 HP BRIGGS & STRATTON CLUTCH ASSIST HANDLE ASSY HEX FINISH NUT 5/16-24 FLAT WASHER 5/16” HHCS 5/16-24X1.
J-SERIES TROWEL — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. PAGE 60 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1860 0627 1231 1232 0251 0458 0454 0855 0253 0457 0456 1867 1335 2577 0181B 0740 1390 0400B 0300B 0161C ELECTRIC MOTOR 2HP 1 SQUARE KEY 3/16X3/16X1.1/4" 1 AUTOMATIC CLUTCH ASM 5/8" BORE 1 SPINDLE 5/8" BORE 1 DRUM, CLUTCH HOUSING ...................... 1 .............
J-SERIES TROWEL — GUARD RING ASSY. GUARD RING ASSY. PAGE 62 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — GUARD RING ASSY. GUARD RING ASSY. NO. PART NO. PART NAME 1 2 2 2274 1489 1490 STATIONARY GUARD RING ............................................... 1 ............ REPLACES P/N 1244 SPIDER PLATE ASSY 16-1/2" ARM (EXT) .......................... 1 ............ 3-BLADE MODEL SPIDER PLATE ASSY 16-1/2" ARM (EXT) .......................... 1 ............ 4-BLADE MODEL QTY. REMARKS J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY. (OPTIONS) BLADES & ADJUSTMENT FIXTURE ASSY. PAGE 64 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY. BLADES & ADJUSTMENT FIXTURE ASSY. NO. PART NO. PART NAME 20 20 21 22 22 23 25 26 28 29 30 31 32 33 34 35 36 0202 02274 1434 1869 1940 1817 0987 0988 S986 0414 0106 0985 39 39 40 40 41 42 43 1871 101871 1872 101872 1857 2870 2935 * * * * * QTY. REMARKS COMBO FLOAT & FINISH BLADE .......................... 3,4 ...... CONTACT UNIT SALES DEPT./ACCESSORY ITEM ENDURO COMBO FLOAT &FINISH BLADE .......... 3,4 ...... CONTACT UNIT SALES DEPT.
J-SERIES TROWEL — LIFTING BALE ASSY. (OPTION) LIFTING BALE ASSY. (OPTION) PAGE 66 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
J-SERIES TROWEL — LIFTING BALE ASSY. (OPTION) LIFTING BALE ASSY. (OPTION) NO. PART NO. PART NAME 1 2 3 4 5 7 8 10229 0161C 0205 0166A 1897 QTY. REMARKS LIFTING BALE ASSY .................................. 1 ............. CONTACT UNIT SALES DEPT./ACCESSORY ITEM HHCS 5/16-24X1" 4 LOCK WASHER 5/16" 4 LIFTING BALE ASSY .................................. 1 ............. CONTACT UNIT SALES DEPT.
HONDA GX160K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 68 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 14 15 12210ZH8000 12204ZE1306 12205ZE1315 12216ZE5300 12251ZF1800 12310ZE1010 12391ZE1000 15721ZH8000 90016ZE1000 90043ZE1020 90047ZE1000 9430110160 957230806000 9807956846 9807956855 CYLINDER HEAD, COMP .............................. GUIDE, IN. VALVE (OVER SIZE) GUIDE, EX.
HONDA GX160K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 70 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO PART NO PART NAME 1 2 4 5 # 7 # 8 9 10 11 12 13 14% 15% 18 19 06165ZE1000 12000ZH8010 16510ZE1000 16511ZE1000 16513ZE1000 16531ZE1000 16541ZE1000 90131ZE1000 90451ZE1000 90601ZE1000 90602ZE1000 91001ZF1003 91202883005 9410106800 9425108000 GOVERNOR KIT ........................................................ 1 .......... INCLUDES ITEMS W/ CYLINDER BARREL ASSY. ....................................... 1 ..........
HONDA GX160K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 72 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO PART NO PART NAME 1 3 4 5 7 8 9# 10% 11 12 13 14 11300ZE1641 11381ZH8801 15600ZE1003 15600ZG4003 15620ZG4910 15621896010 15625ZE1000 15625ZE1003 91202883005 9430108140 957010803200 961006205010 COVER ASSY, CRANKCASE (U TYPE) .......... 1 ..........INCLUDES ITEMS W/ GASKET CASE COVER 1 CAP ASSY, OIL FILLER 1 INCLUDES ITEMS W/# CAP ASSY, OIL FILLER ................................... 1 ..........
HONDA GX160K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 74 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO PART NO PART NAME 3 9 13310ZE1601 90745ZE1600 CRANKSHAFT COMP.,(Q TYPE) KEY (4.78X4.78X38) QTY. REMARKS 1 1 J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — PISTON RINGS ASSY. PISTON ASSY. PAGE 76 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — PISTON RINGS ASSY. PISTON RINGS ASSY. NO 1 2 3 4 5 6 * PART NO 13010ZF1023 13011ZF1023 13012ZF1023 13013ZF1023 13101ZH8000 13102ZH8000 13103ZH8000 13104ZH8000 13111ZE1000 132A0ZE1000 90001ZE1000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (0.25) 1 RING SET, PISTON (0.50) 1 RING SET, PISTON (0.75) 1 PISTON (STD) 1 PISTON (0.25) 1 PISTON (0.50) 1 PISTON (0.75) 1 PIN, PISTON 1 ROD ASSY, CONNECTING ............................ 1 ..........
HONDA GX160K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 78 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 14100ZE1812 14410ZE1010 14431ZE1000 14441ZE1010 14451ZE1013 14568ZE1000 14711ZF1000 14721ZF1000 14751ZF1000 14771ZE1000 14773ZE1000 14781ZE1000 14791ZE1010 90012ZE0010 90206ZE1000 CAMPSHAFT ASSY. ........................................ 1 .......... INCLUDES ITEMS W/ ROD, PUSH 2 ARM, VALVE ROCKER 2 LIFTER, VALVE 2 PIVOT, ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN. 1 VALVE, EX.
HONDA GX160K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 80 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 28400ZH8013ZB 28410ZH8003ZB 28420ZH8013 28422ZH8013 28433ZH8003 28441ZH8003 28442ZH8003 28443ZH8003 28461ZH8003 28462ZH8003 90003ZH8003 957010600800 STARTER ASSY, RECOIL NH1(BLACK) ........ 1 .......... INCLUDES ITEMS W/ CASE COMP.
HONDA GX160K1QA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 82 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO PART NO PART NAME 2 4 8 11 13 14 19610ZE1000ZC 19612ZH8000 19630ZH8000 36100ZE1015 90013883000 90022888010 COVER COMP., FAN NH1(BLACK) PLATE, SIDE(STD) SHROUD COMP. SWITCH ASSY., ENGINE BOLT, FLANGE 6X12 BOLT, FLANGE 6X20 QTY. REMARKS 1 1 1 1 6 1 J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 84 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY.
HONDA GX160K1QA2 ENGINE — AIR CLEANER ( OIL BATH ) ASSY. AIR CLEANER (OIL BATH ) ASSY. PAGE 86 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — AIR CLEANER ( OIL BATH ) ASSY. AIR CLEANER (OIL BATH ) ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 12 13 16271ZE1000 17238ZE7010 17239ZE1000 17401ZE1810 17402ZE1810 17403ZE1810 17404841000 17410ZE1020 17421ZE1000 90201415000 90325044000 957010602000 GASKET ELBOW 1 COLLAR AIR CLEANER 2 COLLAR B AIR CLEANER 1 BODY CLEANER OIL BATH 1 PAN CLEANER OIL OIL BATH 1 AIR CLEANER ELEMENT OIL BATH 1 GRID AIR CLEANER 1 ELBOW COMP. AIR CLEANER .................... 1 ..........
HONDA GX160K1 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 88 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO PART NO PART NAME 1 3 6 7 8 9 11 12 14 15 18310ZH8810 18320ZF1H01 18340ZE1010 18355ZE1000 18381ZH8800 18522ZE1000 90050ZE1000 90055ZE1000 90183671003 94001080000S MUFFLER COMP. PROTECTOR, MUFFLER DEFLECTOR COMP. ARRESTER, SPARK GASKET, MUFFLER GUIDE, MUFFLER SCREW, TAPPING 5X8 SCREW, TAPPING 4X6 SCREW, TAPPING 4X8 NUT, HEX (8MM) QTY. REMARKS 1 1 1 1 1 1 4 1 2 2 J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 90 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO PART NO PART NAME 1 2 3 5 6# 7 10 11 12 13 14 15 16854ZH8000 16955ZE1000 17510ZE1020ZF 17620ZH7013 17631ZH7003 17672ZE2W01 89218ZE1000 91353671003 9405006000 950014500840M 9500202080 957010602500 RUBBER, SUPPORTER 1 JOINT, FUEL TANK 1 TANK COMP., FUEL NH1 (BLACK) 1 CAP COMP., FUEL FILLER ............................. 1 .......... INCLUDES ITEMS W/# GASKET, FUEL FILLER CAP 1 FILTER, FUEL 1 WRENCH COMP.
HONDA GX160K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 92 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO PART NO PART NAME 1 2 3 5 13331357000 19511ZE1000 28450ZH8811 31100ZE1000 31100ZE1810 90201878003 KEY, SPECIAL WOOD RUFF, 25X18 FAN, COOLING PULLEY COMP., STARTER FLYWHEEL COMP. FLYWHEEL COMP., LAMP NUT, SPECIAL, 14MM 8 QTY. REMARKS 1 1 1 1 1 1 J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 94 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO PART NO PART NAME 1 2 7 11 30500ZE1033 30700ZE1013 36101ZE1010 90121952000 COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR WIRE, STOP SWITCH (370MM) BOLT, FLANGE, 6X25 QTY. REMARKS 1 1 1 2 J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 96 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO PART NO PART NAME 2 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 22 23 24 16500ZH8821 16551ZE0010 16555ZE1000 16561ZE1020 16562ZE1020 16571ZH8000 16574ZE1000 16575ZH8000 16576891000 16578ZE1000 16580ZH8811 16584883300 16592ZE1810 90013883000 90015ZE5010 90114SA0000 93500050250H 938930501600 9405006000 CONTROL ASSY., REMOTE .......................... 1 ..........
HONDA GX160K1QA2 ENGINE — LABEL ASSY. LABEL ASSY. PAGE 98 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — LABEL ASSY. LABEL ASSY. NO PART NO PART NAME 1 2 3 6 7 87521ZH8010 87522ZE1810 87522ZH9000 87258ZE1810 87530ZH8810 EMBLEM, INTERNAL MARK, CAUTION EXTERNAL LABEL, CAUTION MARK, CHOKE LABEL, SPECIFICATION EXTERNAL QTY. REMARKS 1 1 1 1 1 J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
NOTE PAGE PAGE 100 — J-SERIES WALK-BEHIND POWER TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX160K1QA2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO PART NO PART NAME 1 2 3 4 5 6 06111ZH8405 11381ZH8801 12251ZF1800 12391ZE1000 16212ZH8800 16221ZH8801 18381ZH8800 GASKET KIT .................................................... 1 .......... INCLUDES ITEMS W/ GASKET, CASE COVER NON ASBEST 1 GASKET, CYLINDER HEAD 1 GASKET, CYLINDER HEAD COVER 1 GASKET, INSULATOR 1 GASKET, CARBURATOR 1 GASKET, MUFFLER 1 * * * * * * QTY.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTE PAGE J-SERIES WALK-BEHIND POWER TROWEL — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
