OPERATION AND PARTS MANUAL SERIES MODELS MVH502DSB MVH502DSB2 REVERSIBLE PLATE COMPACTOR (HATZ 1D81S DIESEL ENGINE) Revision #5 (03/11/11) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Diesel engine exhaust and some of PAGE 2 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MIKASA MVH502DSB/DSB2 HATZ1D81S DIESEL ENGINE PLATE COMPACTOR NOTICE Proposition 65 Warning ..............................................2 Table Of Contents ......................................................3 Parts Ordering Procedures ........................................4 Safety Information .................................................. 5-9 Operation and Safety Decals ...................................10 Specifications .........................................................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication. NEVER operate this equipment under the influence of drugs or alcohol.
SAFETY INFORMATION COMPACTOR SAFETY DANGER NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death. WARNING NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.
SAFETY INFORMATION FUEL SAFETY BATTERY SAFETY (ELECTRIC START ONLY) DANGER DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. FUEL DO NOT drop the battery. There is a possibility that the battery will explode. DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing. Always make sure crane or lifitng device has been properly secured to the lifting bail (hook) of the equipment. ALWAYS shutdown engine before transporting. NEVER lift the equipment while the engine is running.
OPERATION AND SAFETY DECALS Figure 1 displays the operation and safety decals as they appear on the reversible plate compactor. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set. Figure 1. Operation and Safety Decals PAGE 10 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
SPECIFICATIONS TABLE 1. MVH-502DSB REVERSIBLE PLATE COMPACTOR SPECIFICATIONS Centrifugal Force 14,000 lbs. (6,350 kg) Vibration Frequency 4,000 vpm (67 Hz) Traveling Speed 0 to 75.5 ft/min (0 to 23 m/min) Plate Size (L x W) 39 x 21.7 in (990 x 550 mm) Overall Length 60 in (1,525 mm) Overall Width 21.7 in (550mm ) Overall Height 43.3 in (1,100 mm ) Operating Weight 1122 lbs. (510 kg) Lubricating Oil in Vibration Case 33.8 fl oz (1,000 cc) Table 2.
DIMENSIONS Figure 2. MVH502DSB/DSB2 Reversible Plate Compactor Dimensions TABLE 3. DIMENSIONS REF. DIMENSIONS A 53 in. (134.6 cm.) B 24 in. (61 cm.) C 34 in. (86 cm.) D 63.8 in. (162 cm.) E 38.2 in. (97 cm.) PAGE 12 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GENERAL INFORMATION Plate Compactor Frequency/Speed The Mikasa MVH502DSB/DSB2 is a walk behind, reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
COMPONENTS Figure 3. MVH502DSB/DSB2 Reversible Plate Compactor Components Figure 3 illustrates the location of the major components for the MVH502DSB/DSB2 Reversible Plate Compactor. The function of each component is described below: 8. Starter Switch Engine starts when key is turned to the RUN position 9. Belt Cover – Remove this cover to gain access to the V-belts. NEVER run the compactor without the V-belt cover.
BASIC ENGINE Figure 4. MVH502DSB/DSB2 Engine Components ENGINE COMPONENTS Figure 4 illustrates the location of the major engine components of the machine. Each component is described below: 1. 4. WARNING Engine components can generate extreme heat.To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank.
INSPECTION 5. Understand the geographical features and regulations of the job site. 6. Clean the compactor, removing dirt and dust, particularly, the bottom of the plate, engine cooling air inlet. Checking Engine Oil Level 1. Make sure that the machine is situated in a flat surface so that level measurements will be accurate. 2. Pull out the dipstick from the oil tank (Figure 5). 68 40 30 20 50 10 32 0 -14 -10 -4 -22 -20 -30 -40 -40 40 104 86 OIL: SAE 30 C 50 15W/40 3.
OPERATION CAUTION 2. Insert the starter key into the key switch and turn it to the RUN position (Figure 9). DO NOT attempt to run the compactor until the Safety, General, and Inspection sections have been read and understood. Adjusting Handle Height The height of the handle is adjustable for your comfort . 1. Loosen the butterfly screw (Figure 7). 2. Turn the grip clockwise to raise the handle or counterclockwise to lower the handle. 3.
OPERATION Crank Handle Start 1. Move the throttle lever to the START position by opening it to about 20 degrees (Figure 8). 2. Pull up decompression lever (Figure 10) to position 1 and release. TRAVELING CAUTION Make sure to follow all safety rules referenced in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily injury. 1.
OPERATION 6. Slowly walk behind the compactor and be on the lookout for any large objects or foreign matter that might cause damage to the compactor or bodily injury. 7. If travel lever is placed in the neutral position, the machine will vibrate in place. STOWING THE HANDLE 1. Push up the handle (Figure 17). 2. Pull the stopper grip upward into the hole of the guard frame to lock the handle. 8. To move the compactor laterally, hold the hand grip firmly and swing compactor.
MAINTENANCE CAUTION CAUTION Inspection and other services should always be carried out on hard and level ground with the engine shutdown. Fuel piping and connections should be replaced every 2 years. Inspection and Maintenance Service Tables. 1. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7. TABLE 5. MVH-502DSB MACHINE INSPECTION TABLE 6.
MAINTENANCE Engine Oil Replacement: 1. Replace engine oil, first in 25 hours of operation and every 50 to 100 hours afterwards. 2. Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's Manual). Air Filter 1. The air filter element should be cleaned because a clogged air cleaner can cause poor engine starting, lack of power and shorten engine life substantially. AIR FILTER CANNISTER Figure 20. V-Belt Check Replacing the V-belt Remove the belt cover.
MAINTENANCE Vibrator Oil Level Check NOTICE Always clean the area around the vibrator oil level check hole before removing oil check plug. This will prevent dirt and debris from entering the system. 1. In every 100 hours of operation, with the machine positioned horizontally, remove vibrator oil level check plug (Figure 21) off vibrator (19 mm wrench) and see if oil is up to filler port. Be sure to clean area around check hole to prevent dirt and dust from entering. 2.
MAINTENANCE BATTERY MAINTENANCE 1. Check the battery terminals periodically to ensure that they are in good condition. 2. Use wire brush or sand paper to clean the battery terminals. 3. Check battery for cracks or any other damage. If white pattern appears inside the battery or paste has accumulated at the bottom, replace the battery. CAUTION Wear safety glasses or face mask, protective clothes, and rubber gloves when working with battery. 4..
TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Troubleshooting (Table 8) information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
TROUBLESHOOTING Practically all breakdowns can be prevented by proper diagnosis based on the Troubleshooting (Table 9) information handling and maintenance inspections, but in the event of a shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business breakdown, please take a remedial action following the office or service plant. TABLE 9. TROUBLESHOOTING COMPACTOR SYMPTOM Travel speed low and vibration weak.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS MQ MIKASA MVH502DSB/DSB2 REVERSIBLE PLATE COMPACTOR W/HATZ 1D81S DIESEL ENGINE 1 to 3 Units Qty. P/N Description 6 .......... 070200453 ........... V-BELT-45 GREEN 3 .......... 456499280 ........... FILTER, HYDRAULIC OIL TANK 1 .......... 457333760 ........... THROTTLE CABLE ASSY. 6 .......... 01480000 ............. OIL FILTER, ENGINE 1 .......... 50397300 ............. SEIVE, FUEL TANK 6 .......... 50478800 ............. FUEL FILTER 1 .......... 50385800 .............
DECAL PLACEMENT PAGE 28 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
DECAL PLACEMENT NO. 1 2 3 4 5 6 7 8 9 PART NO. 920204580 920202220 920206370 920203330 920201580 920103670 920207480 920205000 920203260 PART NAME QTY. REMARKS FULL THROTTLE DECAL 1 NPA-458 FORWARD/REVERSE DECAL 1 NPA-222 OPERATIONAL CAUTION DECAL 1 NPA-538 HEARING PROTECTION DECAL .............. 1.........
VIBRATING PLATE ASSY. PAGE 30 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATING PLATE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 21 22 23 24 PART NO. 457112370 953405840 953402930 953400270 953405260 939010070 020316130 030216400 001221655 030216400 001201830 030218460 456210690 001221850 457215350 457454090 PART NAME QTY. REMARKS VIBRATING PLATE 550B 1 DRAIN PLUG M 18 (R) 1 COPPER PACKING 19X30X1 1 PLUG 1/4X14 10L 1 PACKING 1/4 (CU) 1 SHOCK ABSORBER 100 4 NUT M16 4 WASHER, LOCK M16 4 BOLT 16X75 T 4 WASHER, LOCK M16 4 BOLT 18X30 8 WASHER, LOCK M18 8 EXTENSION PLATE ..............
BASE AND ENGINE ASSY. PAGE 32 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. NO. 2 3 4 5 6 7 8 9 10 11 11 12 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PART NO. 457116080 457333670 457333680 001221252 030212300 031112230 918400600 001221225 030212300 457336260 457339570 001220830 001221025 030208200 457114280 001521040 457114290 001521055 001521058 457445880 457112431 457335980 001220615 030206150 031106100 457336370 951400360 952401390 001221035 030210250 070200453 457112440 PART NAME QTY.
BASE AND ENGINE ASSY. PAGE 34 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. NO. 33 34 35 36 37 38 39 40 41 42 43 44 45 46 48 49 50 52 54 55 56 57 58 59 60 61 62 63 PART NO.
VIBRATOR ASSY. PAGE 36 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATOR ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 PART NO.
VIBRATOR ASSY. PAGE 38 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATOR ASSY. NO. PART NO. PART NAME 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 080200100 455435051 455010070 080100260 456327130 456210646 954405550 050101050 001221025 030210250 001220812 953404600 455010020 031110160 457332430 457010010 457445840 457212420 001221035 001221030 952405540 030210250 954010140 954001780 952405470 STOP RING S- 10 PISTON, 22.4D PACKING USH- 22.
HYDRAULIC SYSTEM ASSY. PAGE 40 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HYDRAULIC SYSTEM ASSY. NO. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 79 80 81 82 83 84 86 87 88 89 90 PART NO.
CONTROL ASSY. PAGE 42 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL ASSY. NO. 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 PART NO.
CONTROL ASSY. PAGE 44 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL ASSY. NO. 35 36 37 38 40 41 42 45 46 47 48 49 50 51 52 53 54 55 56 57 59 60 60 61 62 63 64 65 66 67 PART NO. 501402880 959403460 020410060 456449980 953405260 031110160 456450760 457214910 001220820 030208200 031108160 001220815 033910020 457445910 001220850 020308060 031108160 001220630 020306050 031106100 457116030 456214220 456214222 456214210 032112220 456451400 456337400 608010090 457332480 020412070 PART NAME SPRING/ HANDLE ( 1.
BATTERY ASSY. PAGE 46 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 19 26 27 29 32 33 34 35 36 47 59 60 PART NO.
THROTTLE ASSY. PAGE 48 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
THROTTLE ASSY. NO. 1 2 3 4 5 6 7 8 9 11 12 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 37 38 39 40 41 42 43 PART NO.
HATZ 1D81S ENGINE — CRANKCASE ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 50 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — CRANKCASE ASSY. NO. PART NO. PART NAME 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 23 25 26 01249051 50249101 03793900 03793800 03794000 03793700 04033700 04000800 50144300 03794510 03794800 50098300 50325500 50037800 50328200 04011650 04069500 04062010 50357700 04087400 04084500 04084500 CRANKCASE ...................................... 1 ........ INCLUDES ITEMS W/ CYL. PIN 6/20 4 NOZZLE 1 BEARING BUSH 1 PLUG 1..2 MAIN BEARING 1 MAIN BEARING -O.
HATZ 1D81S ENGINE — CRANKCASE ASSY. (EXTERNAL PARTS) LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 52 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — CRANKCASE ASSY. NO. 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 18 20 21 22 23 24 25# 26# 27 28 29 30 31 * 32* 33 34 35 36 37 38 39 41 42 43 44 45 46 47 48 49 50 52 53 53 54 54 55 56 58 59 PART NO.
HATZ 1D81S ENGINE — CRANKSHAFT ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 54 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — CRANKSHAFT ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9 10 11# 12# 13 14# 15 16 17 18 19 20 21 22 23 24 01269810 CRANKSHAFT ASSY. ................................ 1 ...... INCLUDES ITEMS W/ CRANKSHAFT ............................................. 1 ...... CANNOT BE PURCHASED SEPARATELY COVER 28 1 COUNTER WEIGHT 1 ALLEN SCREW M 10 X 50 2 FITTING KEY A 6 X 4 X 32 1 GEARWHEEL F. CRANKS 1 BUFFER RING 1 O-RING 123 X 2.5 1 BEARING FLANGE ASSY. ........................... 1 ......
HATZ 1D81S ENGINE — CAMSHAFT ASSY. PAGE 56 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — CAMSHAFT ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9 10 11 # 12# 03796400 03796500 01242000 04099900 03796800 03796900 01267300 01267200 SHAFT 2 BUSH 2 GEARWHEEL 2 CAMSHAFT 1 GEARWHEEL 1 GEARWHEEL 1 SHAFT, PUMP SIDE ............................ 1 ........ INCLUDES ITEMS W/ SHAFT STARTER SIDE ...................... 1 ........ INCLUDES ITEMS W/# COUNTER BALANCE ......................... 1 ........ CANNOT BE PURCHASED SEPARATELY WOODRUFF KEY 3 X 3.7 2 PIN ...........................
HATZ 1D81S ENGINE — PISTON/RINGS ASSY. PAGE 58 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — PISTON/RINGS ASSY. NO. PART NO. PART NAME 1 1 2 2 2 2 3 #+ 4 #+ 5 #+ 6 + 7# 7# 8+ 9 10 11% 12% 13% 14 15 01243901 01313510 01265101 01265201 01314610 01314710 PISTON ASSY. STD................................. 1 .............. INCLUDES ITEMS W/ PISTON ASSY. OVERSIZED ................... 1 .............. INCLUDES ITEMS W/ PISTON ASSY. 100+0.5 ........................... 1 .............. INCLUDES ITEMS W/# PISTON ASSY. 100+1.0 ........................... 1 ..............
HATZ 1D81S ENGINE — CYLINDER HEAD ASSY. K= HOT TEMPERATURE FELT 100g PAGE 60 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — CYLINDER HEAD ASSY. NO. PART NO. PART NAME 1 1 2 3 4 5 5 6 6 7 7 8 9 10 11 12 13# 14% 15% 16+ 17 18% 19 20 21 22# 23 24 25 26 27 28 29+ 30 31 32 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 01264810 01499610 CYLINDER HEAD ASSY. .................. 1 ........... INCLUDES ITEMS W/ CYLINDER HEAD ASSY. .................. 1 ........... INCLUDES ITEMS W/ CYLINDER HEAD ............................ 1 ........... CANNOT BE PURCHASED VALVE GUIDE 2 STUD M 8 X 35 1 ROCKER SHAFT ASSY. “C” ....
HATZ 1D81S ENGINE — CYLINDER HEAD ASSY. PAGE 62 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — CYLINDER HEAD ASSY. NO. PART NO. PART NAME 51 52 53 54■ 55■✓✢ 56■✓ 57 60 61 66 67 68 69✪ ✢ 70✢ 71✪ 72 74 75 76 77 78 79 80 81 82 83 85 86 88 89 90 90 91 50366300 50208500 01493200 ALLEN SCREW M 8X 20 2 LOCK WASHER 8 2 DEVICE HOUSING .......................... 1 ........... INCLUDES ITEMS W/■ HOUSING DEVICE BASE ................ 1 ........... CANNOT BE PURCHASED O-RING 12 X 16 X2 2 CAP ................................................... 1 ...........
HATZ 1D81S ENGINE — FLYWHEEL ASSY. PAGE 64 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — FLYWHEEL ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 15 16 18 01244310 50330200 04002500 50347000 04002000 04002000 50330300 04007410 50363100 04007131 PUSHROD O-RING 19 X 3N PROTECTION TUBE CIRCLIP AS 24 X 1.75 PRESSURE SPRING PRESSURE RING O-RING 23 X 3 PLATE ALLEN SCREW M 10 X 40 FLYWHEEL , ELECTRIC START QTY. REMARKS 2 2 2 2 2 2 2 1 6 1 MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — OIL PUMP ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 66 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — FLYWHEEL ASSY. NO. PART NO. PART NAME 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 50328000 03797412 01242401 03797310 04063400 03798600 50334700 03797600 03797510 03797701 03798002 03798102 03797900 03797801 50081200 50170800 50051000 50084901 03798720 50260501 04046000 CTR. SUNK SCR.AM 6 X 16 COVER F. OIL PUMP SPRING CAPSULE+BUSH GEARWHEEL GOVERNOR SPRING 2.9 CUP CIRCLIP5 BEARING BUSH HOUSING PLATE CENTRIF.
HATZ 1D81S ENGINE — TIMING COVER ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 68 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — FLYWHEEL ASSY. NO. PART NO. PART NAME 3# 6# 7 8 9 11 12 15# 16# 17# 22 24# 25# 26 05325600 03797600 50330400 04000400 50399000 50417400 50329500 04000310 04023210 50364700 01281001 COVER 50 1 BEARING BUSH 1 O-RING 27 X 2N 1 COVER 1 CIRCLIP 32 X 1.2 1 ALLEN SCREW M 8 X 30 Z3 13 ALLEN SCREW M 12 X 40 1 BEARING BUSH 1 BEARING BUSH 1 OIL SEAL 32 X 52 X 7 1 TIMING COVER ASSY. NO. 3 ............ 1 .......... INCLUDES ITEMS W/# TIMING COVER ................................ 1 ..........
HATZ 1D81S ENGINE — FUEL DEVICE ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 70 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — FUEL DEVICE ASSY. NO. PART NO. PART NAME 1 2 3 4 4 5 6 7 8 9 10 10 10 11 13 15 16 16 17 18% 19% 20 21 22 24 25 26 27 28 # 29 # 30 36# 37# 38# 39# 40 41 42 43 44 45 45 46 47 48 49 50 51 52 53 60 50331500 04000901 50050700 50390200 50363400 04011700 03209700 04102400 04102500 04102600 04071300 04102200 04102300 50416200 50148000 01313600 04025800 40085001 50415101 50415200 ROLLER TAPPET CPL. 1 GUIDE 1 ALLEN SCREW M 6 X 16 1 O-RING 17 X 1.1 0..1 O-RING 17 X 1.2 0..1 PLATE 1 SHIM 0.3 0.
HATZ 1D81S ENGINE — AIR DUCTING ASSY. PAGE 72 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — AIR DUCTING ASSY. NO. PART NO. PART NAME 1 2 3 % 4 % 5 6% 7 8# 9# 10 11 12 13 14 15 16 17 18 19 20 21 23 24 25 28 29 30 01246220 COOLING AIR DUCT ASSY ....... 1 ................. INCLUDES ITEMS W/ COOLING AIR DUCT ................. 1 ................. CANNOT BE PURCHASED SEPARATELY SEALING STRIP 32.2MM 2 SEALING STRIP 76MM 2 COOLING AIR DUCT ................. 1 ................. INCLUDES ITEMS W/% SIDE SHROUD ............................1 .................
HATZ 1D81S ENGINE — BREATHER ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 74 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — BREATHER ASSY. NO. 1# 2# 3 4 5 6# 7 8 9 10 11 12 13 13 14 15 16 17 18 19 20 21 22 23 24 26 37 38% 39% 40% 41% 42% 43 44 45 46% 47 48 49 50 51 * * * PART NO.
HATZ 1D81S ENGINE — FUEL TANK ASSY. PAGE 76 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — FUEL TANK ASSY. NO. PART NO. PART NAME 2 3 4# 5# 6# 7# 8 9 10# 11# 12 13 14 15 16 17 18 19 20 21# 22# 23# 24 25 26% 27% 28 29 30# 31 32 33 34 35 36 37 38 01494200 05097600 03981802 03981701 03981900 FUEL TANK ASSY ( 7 LTRS.) ................. 1 ............ INCLUDES ITEMS W/# WASHER 12 RUBBER WASHER 12 BUSH 8.4 X 13 X 7.5 6 RUBBER SHELL 6 FUEL TANK ............................................. 1 ............ CANNOT BE PURCHASED SEPARATELY BUSH 8.
HATZ 1D81S ENGINE — FUEL PUMP ASSY. PAGE 78 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — FUEL PUMP ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 04011900 03796400 04011801 04000800 50331800 50332301 50328300 50001200 50006400 50015900 01468801 49062501 BUSH SHAFT LEVER F. FEED PUMP PLUG O-RING FUEL FEED PUMP HEXAGON NUT M6 JOINT A 14 X 18 BANJO BOLT A8 RING PIECE N W 8 FUEL PIPE DIAPHRAM QTY. REMARKS 1 1 1 1 1 1 3 4 2 1 1 1 MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — AIR FILTER ASSY. L= SILICON SEALER PAGE 80 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — AIR FILTER ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 34 35 37 36 38 39 40 41 42 43 46 47 48 52 53# 54# 55# 56# 57 58 59 60 61 62 63 64 65 66 50038900 04006300 04006200 04004312 50095100 50398400 01493000 01483400 50148100 50129500 50412000 05036400 05039300 03579400 50062400 50062300 01496800 04047701 05039401 STUD M 8 X 60 2 GASKET 2 INSULATING FLANGE 1 AIRFILTER HOUSING 1 LOCK WASHER A8 1 CYLINDER HEAD BOLT 1 AIR FILTER 1 RETAINING STRAP 1 FLAT WASHER 8.
HATZ 1D81S ENGINE — EXHAUST SILENCER ASSY. J= HOT TEMPERATURE PASTE PAGE 82 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — EXHAUST SILENCER ASSY. NO. PART NO. PART NAME 1 2 3 6 10 11 12 13 14 16 18 19 20 01498800 EXHAUST SILENCER S ASSY. ......... 1 .......... INCLUDES ITEMS W/ EXHAUST SILENCER ....................... 1 .......... CANNOT BE PURCHASED SEPARATELY ALLEN SCREW M 8 X 30 3 GASKET SET EXHAUST SIL. 1 ELBOW 1 PIPE CLIP 52.5 1 HEX SCREW M 10 X 50 1 FLAT WASHER 10.
HATZ 1D81S ENGINE — STARTER/ALTERNATOR ASSY. PAGE 84 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — STARTER/ALTERNATOR ASSY. NO. PART NO. PART NAME QTY.
HATZ 1D81S ENGINE — INSTRUMENT BOX ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 86 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — INSTRUMENT BOX ASSY. NO. PART NO. PART NAME 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 % 15 18% 20 21 22 24 25 26 26 27 28 29 % 30 31 32 33 34 35 36 37 37 41 42# 47 48# 49# 50 01407000 01457700 40028200 00716311 50289200 50160800 50159010 50049300 50159100 50160700 50158800 03666700 50147100 05004300 50276502 50384401 50345300 50404900 INSTRUMENT BOX 12 V ................. 1 ........... INCLUDES ITEMS W/ INSTRUMENT BOX 24 V ................. 1 ........... INCLUDES ITEMS W/ HEX.
HATZ 1D81S ENGINE — LIFTING MAGNET/STOP DEVICE ASSY. LETTERS IN BOLD INDICATE TYPE OF BONDING ADHESIVE TO BE USED. D= LOCTITE 221 H= SILICON E= LOCTITE 648 PAGE 88 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HATZ 1D81S ENGINE — LIFTING MAGNET/STOP DEVICE ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9# 10# 11 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 01254602 50343300 04021400 04021800 04021700 50144500 50328300 05015100 LEVER CPL. 1 O-RING 4.6 X 1.85 1 BUSH 1 SPRING 1 LEVER 1 FLAT WASHER 6.4 1 HEXAGON NUT M 6 1 SUPPORT SOLENOID 1 BUSHING ......................................... 1 ........... CANNOT BE PURCHASED SEPARATELY LINKAGE .......................................... 1 ...........
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.
