OPERATION AND PARTS MANUAL SERIES MODEL MVH408GH REVERSIBLE PLATE COMPACTOR (HONDA GX390UT2SMXC GASOLINE ENGINE) Revision #0 (03/25/2014) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING PAGE 2 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
NOTES MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MVH408GH Reversible Plate Compactor Proposition 65 Warning............................................ 2 Table Of Contents..................................................... 4 Parts Ordering Procedures....................................... 5 Safety Information............................................... 6-10 Specifications......................................................... 11 Dimensions............................................................. 12 General Information.......
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! View Parts Diagrams Order Parts Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication. NEVER operate this equipment under the influence of drugs or alcohol.
SAFETY INFORMATION COMPACTOR SAFETY WARNING DANGER NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death. WARNING NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.
SAFETY INFORMATION FUEL SAFETY BATTERY SAFETY (ELECTRIC START ONLY) DANGER DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. MVH-306 DO NOT drop the battery. There is a possibility that the battery will explode. DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE When the life cycle of this equipment is over, remove battery and bring to appropriate facility for lead reclamation. Use safety precautions when handling batteries that contain sulfuric acid. When the life cycle of this equipment is over, it is recommended that the trowel frame and all other metal parts be sent to a recycling center.
SPECIFICATIONS Table 1. MVH408GH Specifications Centrifugal Force 12,365 lbf (55 kN) Vibration Frequency 4,400 vpm (73 Hz) Maximum Traveling Speed 82 ft/min (25 m/min) Plate Size (W x L) 19.68 x 35.3 in (500 x 900 mm) Plate Size (W x L) with extension plates 25.6 x 35.3 in (650 x 900 mm) Max. Forward Speed 82 ft./min (25 m/min) Operating Weight 802 lbs. (364 kg.) Operating Weight with extension plates 836 lbs. (379 kg.) Table 2.
DIMENSIONS Stored position Working position D C A B F G extension plate (option) Figure 1. Dimensions Table 3. Dimensions REF. DES IN. (MM) A 19.68 (500) B 25.60 (650) C 36.61 (930) D 47.64 (1210) E 53.54 (1360) F 35.3 (900) G 62.01 (1575) PAGE 12 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
GENERAL INFORMATION DEFINITION OF PLATE COMPACTOR FREQUENCY/SPEED The Mikasa MVH408GH is a reversible plate compactor designed for efficient compaction of sand, graveland cohesive soils. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
COMPONENTS 1 2 4 3 5 8 6 7 10 17 12 Neutral Reverse Forward 9 11 (Stored position 13 11 16 (Working position) 15 14 Figure 2. Plate Compactor Components PAGE 14 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
COMPONENTS Figure 2 shows the location of the basic controls and components of the MVH408GH Plate Compactor. The function of each control is described below: 1. Rubber Cover — Lift this rubber cover to gain access to the fuel tank. 2. Hour/Tachometer — Displays the cumulative time that the machine has been in use. During operation it displays the rpm reading. 3.
BASIC ENGINE 1 9 8 2 7 12 6 5 11 4 10 3 Figure 3. Engine Controls and Components INITIAL SERVICING The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details of operation and servicing. 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.
INSPECTION BEFORE STARTING DANGER 1. Read all safety instructions at the beginning of manual. EXPLOSIVE FUEL! 2. Clean the compactor, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the compactor if the engine is hot! or running. 3. Check the air filter for dirt and dust.
INSPECTION V-BELT INSPECTION VIBRATOR OIL CHECK Visually examine the V-belt (Figure 8) and determine if it is full of tiny cracks, frayed, has pieces of rubber missing, is peeling or otherwise damaged. 1. Place the plate compactor horizontally on a flat surface. Make sure the compactor is level when checking the oil in the vibrator assembly. Also, examine the belt and determine if it is oil soaked or "glazed " (hard shiny appearance on the sides of the belt).
STARTUP CAUTION DO NOT attempt to operate the compactor until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. 3. Place the choke lever (Figure 14) in the “CLOSED” position if starting a cold engine. CHOKE LEVER This section is intended to assist the operator with the initial startup of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field.
STARTUP 6. Grasp the starter grip (Figure 17) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding the compression point. Rewind the rope a little from that point and pull out sharply. 9. Before the compactor is placed in to operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a loose component. 10. During operation, the hour tachometer displays "rotation number" (Figure 19).
OPERATION OPERATION 4. When the direction control lever is the neutral position, the machine vibrates staying at the same location CAUTION ALWAYS follow all safety rules in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause bodily injury or damage to the compactor. 1. Once the engine has started, move the engine throttle lever quickly to the operation position (Figure 20).
OPERATION 2. Place the engine ON/OFF switch (Figure 23) in the OFF position. Figure 23. Engine ON/OFF Switch (OFF Position) 3. Place the fuel shut-off lever (Figure 24) in the OFF position. Figure 24. Fuel Valve Lever (OFF) Emergency Shutdown 1. Move the throttle lever quickly to the IDLE position, and place the engine ON/OFF switch in the OFF position. PAGE 22 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
MAINTENANCE GENERAL MAINTENANCE General Cleanliness General maintenance practices are crucial to the performance and longevity of your compactor. This equipment requires routine cleaning, inspection and lubrication. Refer to Table 5 and Table 6 for scheduled engine and compactor maintenance. Clean the compactor daily. Remove all dust and debris buildup (mud, clay etc.). If the compactor is steam-cleaned, ensure that lubrication is accomplished AFTER steam cleaning.
MAINTENANCE To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Table 5 and Table 6. ENGINE MAINTENANCE Perform engine maintance as listed in Table 5. Description (3) Engine Oil Air Cleaner All Nuts and Bolts Spark Plug Cooling Fins Spark Arrester Fuel Tank Fuel Filter Idle Speed Valve Clearance Fuel lines Operation Table 5.
MAINTENANCE MACHINE INSPECTION TIGHTENING TORQUE Perform machine inspection as listed in Table 6. Reference Table 7 below (Tightening Torque ), for retightening of nuts and bolts. Table 7. Tightening Torque (in. kg/cm Diameter) Table 6. Machine Inspection Interval Daily Before Starting Every 20 Hours Every 100 Hours Every 200 hours Every 300 hours Every 2 years Material 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 4T 70 150 300 500 750 1,100 1,400 2,000 Repair fuel leaks.
MAINTENANCE 2 Lock Dust exhaust BLOW COMPRESSED AIR FROM THE INSIDE OUT 1 Figure 27. Latching Dust Pot ENGINE OIL NOTICE Drain the engine oil when the oil is warm. Figure 25. Engine Air Cleaner 3. Clean foam element in warm, soapy water or nonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engine oil and completely squeeze out the excess oil from the element before installing. NOTICE 1. Remove the oil drain bolt (Figure 28).
MAINTENANCE HYDRAULIC OIL 1. With the handle in vertical position, remove the plug cap from the hydraulic pump (Figure 29). Breather plug 7. With the direction control lever at the forward-most position, secure the guard frame with a rope to immobilize (Figure 31). Forward-most position Plug cap Guard frame OIL LEVEL Direction control lever Hydraulic pump Figure 29. Removing Plug/Breather Cap 2. Remove the breather plug with a 24 mm wrench at the top of the hydraulic hydraulic pump. 3.
MAINTENANCE SPARK PLUG SPARK ARRESTER CLEANING NOTICE Clean the spark arrester every year or 100 hours. NEVER use a spark plug of incorrect heat range. 1. Remove and clean spark plug (Figure 32) with a wire brush if it is to be reused. Discard spark plug if the insulator is cracked or chipped. 2. Using a feeler gauge adjust spark plug gap to 0.028 ~0.031 inch (0.7~0.8 mm). 3. Thread spark plug into cylinder hole by hand to prevent cross-threading, then tighten securely. 1.
MAINTENANCE STORAGE 1. Wash off dirt and soil from every part with water. While washing, be careful not to let the water splash on the electric components such as the engine muffler. 2. Cover the machine to prevent dust and dirt buildup. 3. Store the machine in a dry area away from direct sunlight. 4. Do not leave the machine outdoors. Keep it indoors. 5. When not used for a long period of time, drain the fuel from the fuel tank. 6.
TROUBLESHOOTING (COMPACTOR) Symptom Travel speed low and vibration weak. Travels forward or backward but unable to switch direction.
TROUBLESHOOTING (ENGINE) Troubleshooting (Engine) Symptom Possible Problem Spark plug bridging? Check gap, insulation or replace spark plug. Carbon deposit on spark plug? Clean or replace spark plug. Short circuit due to deficient spark plug insulation? Check spark plug insulation, replace if worn. Improper spark plug gap? Set to proper gap. Fuel reaching carburetor? Check fuel line. Water in fuel tank? Flush or replace fuel tank. Fuel filter clogged? Replace fuel filter.
TROUBLESHOOTING (ENGINE) Troubleshooting (Engine) - continued Symptom Weak in power, compression is proper and does not misfire. Weak in power, compression is proper but misfires. Engine overheats. Rotational speed fluctuates. Recoil starter malfunctions. (if applicable) Starter malfunctions. Possible Problem Air cleaner dirty? Clean or replace air cleaner. Improper level in carburetor? Check float adjustment, rebuild carburetor. Defective spark plug? Clean or replace spark plug.
NOTES MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT .....................1 .....
SUGGESTED SPARE PARTS MVH408GH PLATE COMPACTOR WITH HONDA GX390UT2SMXC GASOLINE ENGINE 1 to 5 units Qty. P/N Description 4............939010010.............SHOCK ABSORBER, STOPPER 4............939010260.............SHOCK ABSORBER 110X60H 2............070200453.............V-BELT B-45 1............956100069.............THROTTLE WIRE 3............0650140480 ..........SPARK PLUG 1............28462ZE3W01 ......ROPE, RECOIL STARTER 3 ...........17210ZE3505 .......AIR CLEANER ELEMENT 1............17218ZE3505 ....
VIBRATING PLATE ASSY. 24 25 22 19 20 23 18 7 19 20 8 6 18 10 9 14 2 3 5 16 4 15 1 12 11 30 32 OPTION 31 PAGE 36 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
VIBRATING PLATE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 18 19 20 22 23 24 25 30 31 32 PART NO. 468121200 465460670 953402930 953400270 953405260 939010260 020316130 030216400 001221635 030216400 001221830 58407 939010010 020310080 030210250 468352110 014208020 030208200 467351790 050103250 014208020 030208200 467219050 012218050 58407 PART NAME QTY.
VIBRATOR ASSY. 7 7 6 A 6 5 2 8 23 C 1 3 24 22 41 12 21 20 20 12 4 6 5 B 6 13 34 35 16 36 33 27 29 31 11 14 30 1 C A D 1 15 16 D B 32 28 40 30 42 1 17 49 48 44 46 47 PAGE 38 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
VIBRATOR ASSY. NO. 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 20 21 22 23 24 27 28 29 30 31 32 33 34 35 36 40 41 42 43 44 46 47 48 49 51 52 PART NO.
BASE AND ENGINE ASSY. 53 52 30 54 45 31 27 51 29 26 26 C 24 62 42 43 67 C 28 B 41 40 25 61 16 25 49 48 2 65 55 56 33 3 4 5 14 15 22 38 43 42 39 A 8 7 66 47 70 71 41 34 17 69 B 37 35 19 18 A 46 12 13 11 1 PAGE 40 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. NO. 1 2 3 4 5 7 8 11 12 13 14 15 16 17 18 19 22 24 25 26 27 28 29 30 31 33 34 35 37 38 39 40 PART NO. 468121260 912239016 0105051045 030210250 031110160 468352240 009110071 468352120 092006010 468467050 952408810 456343340 951400110 952406050 011208030 030208200 070200453 954407310 0091720000 0211140020 0401140030 465459390 464457380 014208020 030208200 467121100 467351800 001521054 468352140 001521435 030214350 468121230 PART NAME QTY. REMARKS BASE L100 1 ENGINE ASSY.
BASE AND ENGINE ASSY. CONTINUED 53 52 30 54 45 31 27 51 29 26 26 C 24 62 42 43 67 C 28 B 41 40 25 61 16 25 49 48 2 65 55 56 33 3 4 5 14 15 22 38 43 42 39 A 8 7 66 47 70 71 41 34 17 69 B 37 35 19 18 A 46 12 13 11 1 PAGE 42 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. CONTINUED NO. 41 42 43 45 46 47 48 49 51 52 53 54 55 56 61 62 65 66 67 69 70 71 PART NO. 001221445 030214350 031114260 468121240 001521435 031114260 030214350 020314110 467466800 467466810 009120424 617465130 030206150 022710607 90131ZE3790 031112230 402010110 58151 2067550101 959407260 012210015 030210250 PART NAME QTY.
ELECTRIC DEVICE ASSY. 20 26 19 90 25 106 27 18 104 103 113 C 91 94 93 92 96 110 21 114 108 107 23 A B 22 ENGINE 111 105 B 101 100 112 75 C 102 A PAGE 44 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
ELECTRIC DEVICE ASSY. NO. 18 19 20 21 22 23 25 26 27 75 90 91 92 93 94 96 100 101 102 103 104 105 106 107 108 110 111 112 113 114 PART NO. 468218970 011006010 030206150 009120413 030206150 020106050 467466950 009110062 022710607 515010070 009110072 952407930 58151 030205130 022710506 955010311 955010307 955010308 959026828 955407970 454010020 2067550101 955301010 468467570 467466980 020108060 959021812 515450380 955407970 454010020 PART NAME QTY. REMARKS REAR COVER 1 BOLT 6X10 T ..........................
CONTROL ASSY. CONTROL 57 52 58 50 56 58 57 70 48 76 72 83 46 55 73 82 80 47 74 49 73 81 61 84 60 62 43 59 45 44 53 67 16 78 77 63 12 1 64 13 3 7 36 37 40 38 39 51 71 19 18 21 85 28 25 26 11 29 8 10 3 9 27 35 34 69 68 20 9 10 4 5 75 4 5 7 2 23 22 8 11 13 14 PAGE 46 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
CONTROL ASSY. NO. 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 25 26 27 28 29 34 35 36 37 38 39 40 43 44 45 46 47 48 49 50 PART NO.
CONTROL ASSY. CONTINUED CONTROL 57 52 58 50 56 58 57 70 48 76 72 83 46 55 73 82 80 47 74 49 73 81 61 84 60 62 43 59 45 44 53 67 16 78 77 63 12 1 64 13 3 7 36 37 40 38 39 51 71 19 18 21 85 28 25 26 11 29 8 10 3 9 27 35 34 69 68 20 9 10 4 5 75 4 5 7 2 23 22 8 11 13 14 PAGE 48 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
CONTROL ASSY. CONTINUED NO. 51 52 53 55 56 57 58 59 60 61 62 63 64 67 68 69 70 71 72 73 74 75 76 77 78 80 81 82 83 84 85 PART NO. 954003110 458451630 959021813 464216630 464457400 012010030 030210250 467218900 030210250 031110160 020310080 0105091025 030210250 467467380 959403840 464457420 464457350 014208020 0401450160 458450660 033910080 464457440 464010010 011606025 020106050 464010020 001520520 58151 020305040 956100069 454010020 PART NAME QTY.
NAMEPLATE AND DECALS ASSY. 18 20 6 8 21 2 19 16 15 3 23 17 11 22 7 9 19 4 10 1 13 14 12 5 PAGE 50 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
NAMEPLATE AND DECALS ASSY. NO. 1 2 3 4 5 6 7 8 12 13 14 15 16 17 18 19 20 21 22 23 PART NO. 920204580 920203330 920211060 920211090 920201950 920106760 920214200 920214100 920217130 920217110 920201580 920218390 920205860 920218160 920217880 920217770 920217780 920217630 920214740 920214730 PART NAME QTY.
HONDA GX390UT2SMXC — CYLINDER HEAD ASSY. 11 8 5 12 11 14 6 15 12 14 7 14 10 14 43 2 1 16 13 9 9 16 PAGE 52 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CYLINDER HEAD ASSY. NO. 1 2# 3# 4# 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 12210Z5T416 12204ZE2306 12205ZE2305 12216ZE2300 12251Z5T003 12310ZE3791 12391ZE2020 90014Z5T000 90042ZE8000 90441ZE2010 92900080320E 9430112200 12315ZE3840 957011008000 0650140480 17316611000 PART NAME QTY. REMARKS HEAD COMP., CYLINDER .................................1................INCLUDES ITEMS W/ # GUIDE, IN. VALVE (OVERSIZE) 1 GUIDE, EX.
HONDA GX390UT2SMXC — CYLINDER BARREL ASSY. 10 7 13 3 14 14 9 11 12 15 16 1 6 8 6 12 PAGE 54 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CYLINDER BARREL ASSY. NO. 1 3 6 7 8$ 9$ 10 11 12 13 14 15$ 16 PART NO. 12000Z5T407 16541ZE3010 90131896650 90446KE1000 91201Z1C003 91201ZE9003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 35480ZF6003 PART NAME QTY. REMARKS BARREL ASSY, CYLINDER/ALERT ..................1................INCLUDES ITEMS W/$ SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER 8.2X17X0.8 1 OIL SEAL 1 OIL SEAL ...........................................................1................
HONDA GX390UT2SMXC — CRANKCASE COVER ASSY. 10 5 12 4 11 17 17 15 7 3 14 5 13 16 15 17 15 8 6 1 2 9 9 PAGE 56 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CRANKCASE COVER ASSY. NO. 1 2 3 4 5$ 6@ 7@ 8@ 9 10@ 11@ 12 13@ 14@ 15@# 16@# 17@# PART NO. 11300Z8W800 11381Z5T000 15600Z0T820 15600Z1C000 15625Z0T800 16510ZE3000 16531Z0A000 90602ZE1000 90701HC4000 91201Z1C003 58176 957010804000 961006202000 961006207000 16511ZE8000 16512ZE3000 16513ZE2000 PART NAME QTY. REMARKS COVER ASSY., CRANKCASE/S-TYPE .............1................INCLUDES ITEMS W/@ PACKING, CRANKCASE COVER 1 CAP ASSY., OIL FILLER ...................................1..........
HONDA GX390UT2SMXC — CRANKSHAFT ASSY. 9 7 6 8 10 5 PAGE 58 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CRANKSHAFT ASSY. NO. 5 6 7 8 9 10# PART NO. 13310ZF6W72 13351Z1C900 92101080250A 90534706010 90741889810 91001ZF6013 PART NAME QTY. REMARKS CRANKSHAFT....................................................1................INCLUDES ITEM W/ # WEIGHT, BALANCER 1 BOLT 8X25 1 WASHER, LOCK 8MM 1 KEY 7X7X33 (YELLOW) 1 BEARING, RADIAL BALL 6207SH 1 MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — PISTON ASSY. 6 1 5 2 5 3 4 6 PAGE 60 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5%$ 6 PART NO. 13010Z5R004 13011Z5R004 13012Z5R004 13013Z5R004 13101Z1C900 13102Z5T800 13103Z5T800 13104Z5T800 13111Z5T000 13200Z1C900 13200Z1C305 90001ZES000 90601ZE3000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (0.25) 1 RING SET, PISTON (0.50) 1 RING SET, PISTON (0.75) 1 PISTON (STD) 1 PISTON (0.25) 1 PISTON (0.50) 1 PISTON (0.75) 1 PIN, PISTON 1 ROD ASSY., CONNECTING /STD.....................1................
HONDA GX390UT2SMXC — CAMSHAFT ASSY. 12 10 13 17 6 17 6 4 16 4 11 16 15 9 10 1 3 2 8 3 5 5 PAGE 62 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CAMSHAFT ASSY. NO. 1 2 3 4 5 6 8 9 10 11 12 13 15 16 17 PART NO. 12209ZE8003 14100Z5T910 14410Z1C000 14431ZE2010 14441ZE2000 14451ZE1013 14711Z5T900 14721Z5T900 14751Z1C000 14771Z88000 14771Z88000 14775ZE2010 14791Z1D000 90012ZE0010 90206ZE1000 PART NAME SEAL, VALVE STEM CAMSHAFT ASSY. ROD, PUSH ARM, VALVE ROCKER LIFTER, VALVE PIVOT, ROCKER ARM VALVE, IN. VALVE, EX.
HONDA GX390UT2SMXC — RECOIL STARTER ASSY. 5 11 8 77 3 6 4 4 2 12 14 13 10 1 PAGE 64 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — RECOIL STARTER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 28400ZE3W01ZB STARTER ASSY.................................................1................
HONDA GX390UT2SMXC — FAN COVER ASSY. 1 6 2 3 7 7 PAGE 66 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — FAN COVER ASSY. NO. 1 2 3 6 7 PART NO. 16731ZE2003 19610Z5T000ZB 19631Z5T000 81329567020 90013883000 PART NAME CLIP, TUBE COVER CP, FAN/BLACK SHROUD GROMMET, DRAIN HOLE FLANGE BOLT 6X12 QTY. 1 1 1 1 6 REMARKS MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CARBURETOR ASSY. 18 25 17 27 1 12 14 16 8 10 19 22 39 1 13 23 5 11 9 26 24 20 21 2 15 3 1 4 7 1 1 6 PAGE 68 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CARBURETOR ASSY. NO. PART NO. 1@$%& 16010ZE2812 2& 16011ZA0931 3& 16013Z1C003 4%& 16015Z5T901 5& 16016ZH7W01 6$%& 16024Z5T901 7$%& 16028Z5T901 8& 16044Z5T901 9 16100Z5TP72 10& 16124ZE0005 11& 16166Z5T931 12& 16172ZE3W10 13& 16955283000 14 16211Z5T000 15 16220ZA0702 16 16221Z5T000 17 16212Z5T000 18 16610ZE1000 19& 16953ZE1812 20& 16954ZE1812 21& 16956ZE1811 22& 16957ZE1812 23& 16967ZE0811 24& 93500030060H 25# 9430520122 26& 99101ZH81080 27& 99204ZA00450 39& 16959Z5T901 PART NAME QTY.
HONDA GX390UT2SMXC — AIR CLEANER ASSY. 13 15 1 8 5 14 11 14 14 12 10 2 15 14 9 4 6 3 7 7 16 16 PAGE 70 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — AIR CLEANER ASSY. NO. 1 2 3# 4$ 5 6# 7$ 8$ 9 10 11 12 13 14 15 16 PART NO. 16271ZE2010 17210ZE3505 17218ZE3505 17219HA2405 17230ZE3841 17232891000 17238ZE2310 17239ZE3840 17410ZE3841 17470ZE3842 17475ZE3841 17476ZE3841 90009Z1C000 90142MB0000 90325044000 9405006000 PART NAME QTY. REMARKS PACKING, ELBOW 1 ELEMENT, AIR CLEANER.................................1................INCLUDES ITEMS W/ # FILTER, OUTER 1 PACKING, AIR CLEANER COVER ....................1................
HONDA GX390UT2SMXC — MUFFLER ASSY. 17 19 36 37 2 34 19 9 4 23 6 18 28 28 28 5 28 7 PAGE 72 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — MUFFLER ASSY. NO. 2 4 5 6 7 9 17 18 19 23 28 34 36 37 PART NO. 18310Z5T010 18323Z5TW41 18331Z5T000 18331ZE3811 18333Z1C901 18381ZE2W10 90006ZE2000 90013883000 90050ZE1000 90055ZE1000 9405008000 18320Z5T000 18350Z5T800 90050ZE1000 PART NAME MUFFLER COMP. PROTECTOR, EXHAUST PIPE PIPE, EXHAUST CAP, MUFFLER GASKET EX. PIPE GASKET, MUFFLER (ARRESTER) TAPPING SCREW 6X10 FLANGE BOLT 6X12 TAPPING SCREW 5X8 TAPPING SCREW 4X6 FLANGE NUT M8 PROTECTOR COMP.
HONDA GX390UT2SMXC — FUEL TANK ASSY. 18 19 22 4 17 15 12 3 1 16 14 17 16 PAGE 74 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — FUEL TANK ASSY. NO. 1 3 4 12 14 15 16 17 18 19# 22 PART NO. 16854ZH8000 16955ZE1010 17510Z5T000ZA 91353671003 91424Z5T003 9405008000 950024080008 957010802500 17620Z4H900 17631Z0T801 17672Z4H000 PART NAME QTY. REMARKS RUBBER, SUPPORT (107MM) 1 JOINT, FUEL TANK 1 TANK CP, FUEL/BLACK 1 O-RING 14MM ...................................................1................REPLACES 91353671004 TUBE, FUEL, 4.5X235 (FKM) 1 FLANGE NUT M8 2 CLAMP, TUBE (D8) 1 FLANGE BOLT 8X25 2 FUEL TANK CAP CP. ...
HONDA GX390UT2SMXC — FLYWHEEL ASSY. 1 7 3 4 6 PAGE 76 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — FLYWHEEL ASSY. NO. 1 3 4 6 7 PART NO. 19511ZE3000 28451ZE3W01 31110Z5T000 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY, STARTER FLYWHEEL COMP. NUT, SPECIAL 16MM KEY SPECIAL WOODRUFF 25X18 QTY. 1 1 1 1 1 REMARKS MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — IGNITION COIL ASSY. 2 10 28 15 4 9 9 PAGE 78 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — IGNITION COIL ASSY. NO. 2 4 9 10 15 28 PART NO. 30700ZlC811 31512ZE2000 90015883000 90684ZA0601 32110Z5K000 30500Z5T003 PART NAME CAP ASSY., NOISE SUPPRESOR GROMMET, CORD FLANGE BOLT 6X28 CLIP, HARNESS HARNESS ASSY. ENGINE WIRE COIL ASSY. IGNITION QTY. 1 1 2 1 1 1 REMARKS MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CONTROL ASSY. 23 17 24 27 25 26 19 9 8 14 16 4 7 12 16 1 2 11 20 10 3 13 21 PAGE 80 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — CONTROL ASSY. NO. 1 2 3 4 7# 8# 9# 10# 11# 12# 13# 14# 16 17 19# 20# 21# 23 24 25# 26# 27# PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16571ZE3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16580Z5T000 16584883300 16592883310 90013883000 90015Z5T000 90114SA0000 0202005T125 93500050320A 9405006000 16500Z5T306 16594883010 90605230000 0043504060 PART NAME QTY.
HONDA GX390UT2SMXC — ENGINE DECAL ASSY. 8 25 4 32 5 14 6 PAGE 82 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
HONDA GX390UT2SMXC — ENGINE DECAL ASSY. NO. 4 5 6 8 14 25 32 PART NO. 87528Z5T000 87532ZH7000 89216Z0T800 87535ZE1841 87521Z5T000 87539Z0J000 87516Z4H010 PART NAME MARK, CHOKE (GRAY) MARK, THROTTLE INDICATION WRENCH, SPARK PLUG MARK, AIR CLEANER EMBLEM MARK, EX, CAUTION/ENGLISH MARK, OP-CAUTION/ENGLISH QTY. 1 1 1 1 1 1 1 REMARKS MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.
