OPERATION AND PARTS MANUAL SERIES MODEL MVH306GH REVERSIBLE PLATE COMPACTOR (HONDA GX270K1SMX2 GASOLINE ENGINE) Revision #8 (01/31/14) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING PAGE 2 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
NOTES MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MIKASA MVH306GH REVERSIBLE PLATE COMPACTOR Proposition 65 Warning ..............................................2 Table Of Contents ......................................................4 Parts Ordering Procedures ........................................5 Safety Information ................................................ 6-10 Specifications ...........................................................11 Dimensions ..............................................................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication. NEVER operate this equipment under the influence of drugs or alcohol.
SAFETY INFORMATION COMPACTOR SAFETY DANGER NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death. WARNING NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.
SAFETY INFORMATION FUEL SAFETY BATTERY SAFETY (ELECTRIC START ONLY) DANGER DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. FUEL DO NOT drop the battery. There is a possibility that the battery will explode. DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing. Always make sure crane or lifitng device has been properly secured to the lifting bail (hook) of the equipment. ALWAYS shutdown engine before transporting. NEVER lift the equipment while the engine is running.
SPECIFICATIONS Table 1. MVH-306GH Reversible Plate Compactor Specifications Centrifugal Force 10,125 lb (4,602 kg) Vibration Frequency 4,400 vpm (70 Hz) Traveling Speed 0 to 75 ft/min (0 to 23 m/min) Plate Size (L x W) 18 x 34 in (45.72 x 86.36 cm) With External Plate Size (L x W) 24 x 34 in (60.96 x 86.36 cm) Max. Area of Compaction (no extensions) 6,750 sq. ft. (2,057 sq. meters) Overall Length 61.8 in (1570 mm) Overall Width 18.0 in (457 mm) Overall Height (with handle) 44.
DIMENSIONS Figure 3. MVH306GH Reversible Plate Compactor Dimensions Table 3. Dimensions REF. DIMENSIONS A 53 in. (134.6 cm.) B 18 in. (46 cm.) C 34 in. (86 cm.) D 63.8 in. (162 cm.) E 31.7 (80.5 cm.) PAGE 12 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GENERAL INFORMATION Plate Compactor Frequency/Speed The Mikasa MVH306GH is a walk behind, reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
COMPONENTS Figure 4. MVH306GH Reversible Plate Compactor Components Figure 4 illustrates the location of the major components for the MVH306GH Reversible Plate Compactor. The function of each component is described below: 1. Hand Grip – When operating the compactor use this hand grip to maneuver the compactor. 2. Forward & Reverse Lever – Push the lever forward, the compactor will move in a forward direction, pull the lever backwards, the compactor will move in backwards direction.
BASIC ENGINE Figure 5. Honda GX270 Engine Components INITIAL SERVICING The engine (Figure 5) must be checked for proper lubrication and 6. filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other 7. types of engines may vary somewhat. 1. 2. 3. 4. 5. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions.
INSPECTION CAUTION NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of air. 4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 1.16 quarts (1.10 liters). CAUTION ALWAYS wear approved eye and hearing protection before operating the compactor. Before Starting 1. Read safety instructions at the beginning of manual. 2.
INSPECTION CAUTION DO NOT overfill hydraulic oil tank. This could cause oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from entering oil tank. 4. When adding hydraulic oil, only fill to the specified oil level as marked on the front of the hydraulic oil tank (Figure 9). DO NOT overfill. DANGER EXPLOSIVE FUEL! Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling.
OPERATION CAUTION DO NOT attempt to operate the compactor until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field. Refer to Figure 4 for the location of controls and components. Figure 13.
OPERATION 3. Place the choke lever (Figure 16) in the "OPEN " position if starting a cold engine. Figure 16. Engine Choke Lever (Open) 4. Place the choke lever (Figure 17) in the "CLOSED " position if starting a warm engine or the temperature is warm. Figure 19. Starter Grip 7. If the engine has started, slowly return the choke lever (Figure 17) to the CLOSED position. If the engine has not started repeat steps 1 through 6. 8.
OPERATION 3. To make the compactor move in the forward direction push the travel lever ( Figure 21) forward. Figure 23. Engine ON/OFF Switch (OFF) Figure 21. Travel Lever 4. To make the compactor move in the reverse direction pull the travel lever ( Figure 21) backwards. 5. Firmly gasp the compactor's hand grip, the compactor will begin moving in the desired position when the direction lever has been placed in the desired position. 6.
MAINTENANCE Inspection and other services should always be carried out on hard and level ground with the engine shut down. NOTICE Fuel piping and connections should be replaced every 2 years. Inspection and Maintenance Service Tables. 1. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7. TABLE 6. MVH-306GH Engine Check TABLE 5.
MAINTENANCE Spark Plug Air Filter 1. Remove and clean the spark plug (Figure 26). 1. Remove the air cleaner cover and foam filter element as shown in Figure 28. 2. Adjust the spark gap to 0.028 ~0.031 inch (0.6~0.7 mm). This unit has electronic ignition, which requires no adjustments. 2. Tap the paper filter element (Figure 28) several times on a hard surface to remove dirt, or blow compressed air [not exceeding 30 psi (207 kPa, 2.1 kgf/cm2)] through the filter element from the air cleaner case side.
MAINTENANCE Checking and Replacing the V-Belt and Clutch 1. After 200 hours of operation, remove the belt cover to check the V-belt tension (Figure 30). Tension is proper if the belt bends about 3/8”(10 mm) when depressed strongly with finger between shafts. Loose or worn V-belts reduces power transmission efficiency, causing weak compaction and reduces the life of the belt itself.
MAINTENANCE CAUTION Make sure hydraulic oil is at a normal safe operating level. DO NOT over fill. Over filling (excessive oil) will cause excess oil to blow out of breather plug. Figure 32. Hydraulic Oil Cylinder 2. Push the travel lever back and forth to drain the hydraulic oil from the hand pump (hydraulic oil reservoir). 3. After draining hydraulic oil, reconnect hydraulic oil hose to cylinder. 3. Loosen bleeder plug located at top of hydraulic cylinder on side of vibrator (Figure 35).
TROUBLESHOOTING Practically all breakdowns can be prevented by proper diagnosis based on the Engine Troubleshooting (Table 8) handling and maintenance inspections, but in the event of a information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's breakdown, please take a remedial action following the business office or service plant. TABLE 8. ENGINE TROUBLESHOOTING SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug".
TROUBLESHOOTING MVH306GH—TROUBLESHOOTING TABLE 8. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM "Weak in power" compression is proper and does not misfire. POSSIBLE CAUSE SOLUTION Air cleaner not clean? Clean or replace air cleaner Improper level in carburetor? Check float adjustment, re-build carbureator. Defective Spark plug? Clean or replace spark plug. Defective Spark plug? "Weak in power" compression is proper but misfires. Engine overheats. Rotational speed fluctuates.
TROUBLESHOOTING MVH306GH—TROUBLESHOOTING Practically all breakdowns can be prevented by proper diagnosis based on the Compactor Troubleshooting (Table 9) handling and maintenance inspections, but in the event of a information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's breakdown, please take a remedial action following the business office or service plant. TABLE 9. TROUBLESHOOTING COMPACTOR SYMPTOM Travel speed low and vibration weak.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS MVH-306 WITH HONDA GX270K1SMX2 ENGINE 1 to 3 Units Qty. ... P/N ...................... Description 1 ....... 956100055 .......... THROTTLE WIRE 2 ....... 070200363 .......... V-BELT 3 ....... 9807955846 ......... SPARK PLUG 3 ....... 17210ZE2822 ...... ELEMENT, AIR CLEANER (DUAL) 1 ....... 17620Z0T814 ...... CAP, FUEL TANK 1 ....... 28462ZE2W11 ..... ROPE, RECOIL MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
NAMEPLATE AND DECALS NAMEPLATE AND DECALS 5 Shell Tellus Oil 46 NPA-748 J OPERATIONAL CAUTION Do not move travel lever if engine stops 6 8 NPA-1106 10 11 V BELT HDPF-5370 NPA-537 J 4 0PERATIONAL CAUTION Prior to OPERATION, check the engine oil and fuel levels. If not enough, add to proper levels. Warm up engine at low speed for 3-5 minutes. 3 Operate machine at full throttle speed. (incorrect clutch engagement causes clutch to burn.) Use travel lever for forward & reverse motion.
NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 3 4 5 6 7 8 9 10 11 PART NO. 920201950 920110370 920209620 920207480 920204580 920203330 920211060 920201580 920211010 PART NAME QTY. REMARKS DECAL: OIL SAE 10W-30 ........................... 1......... NPA-195 DECAL: MODEL LOGO 1 DECAL: CAUTION ...................................... 1......... NPA-962 DECAL: SHELL TELLUS OIL 46 ................ 1......... NPA-748 DECAL: FULL THROTTLE .......................... 1......... NPA-458 DECAL: EAR PROTECTION ......
VIBRATING PLATE ASSY. VIBRATING PLATE ASSY. PAGE 32 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATING PLATE ASSY. VIBRATING PLATE ASSY. NO. PART NO.
BASE AND ENGINE ASSY. BASE AND ENGINE ASSY. PAGE 34 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. BASE & ENGINE ASSY. NO. PART NO. 1 464117850 2 912227003 3 0105051045 4 030210250 5 031110160 6 464216580 7 001121025 8 030210250 9 031110160 10 464343670 11 464457360 12 456343340 13 951400110 14 952400690 15 001220830 16 030208200 17 464216640 18 092006010 19 464343660 20 464216590 21 001521050 26 464457430 35 464117920 36 456449950 37 011208030 38 030208200 39 031108160 40 022710809 PART NAME BASE ENGINE ASSY.
MVH306GH — BASE ANDBASE ENGINE ASSY. (CONTINUED) AND ENGINE ASSY. BASE AND ENGINE ASSY. (CONTINUED) PAGE 36 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
AND ENGINE ASSY. MVH306GH — BASE ANDBASE ENGINE ASSY. (CONTINUED) BASE AND ENGINE ASSY. (CONTINUED) NO. 41 42 43 44 45 46 47 48 51 52 53 59 60 61 62 63 64 70 71 72 PART NO.
VIBRATOR ASSY. VIBRATOR ASSY. PAGE 38 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATOR ASSY. VIBRATOR ASSY. NO. PART NO.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. PAGE 40 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. NO. PART NO.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. PAGE 42 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. NO. PART NO.
HAND PUMP ASSY. HAND PUMP ASSY. 84 O-RING SET C PAGE 44 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HAND PUMP ASSY. HAND PUMP ASSY. NO. B * C * 2 * 3 * 4 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16# * 17# * 19# * 22 * 22 * 26# * 27# * 28# * 48# * 49# * 81 82 83 84 PART NO. 4649-10040 464910080 464010040 464010050 464010060 464010070 099205005 464010080 464010090 464010100 458010080 001520620 050200200 050200220 050200180 464010110 464010111 050300400 050200150 050100400 069904010 069901010 984010030 984010040 984010050 464216721 PART NAME QTY. REMARKS ACCUMLATOR 1 O-RING DUST,SEAL,SET ......................
GX270K1SMX2 — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 46 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. PART NO. 1 16271ZE2010 2 17210ZE2822 3 17218ZE2821 * 17231ZH9820 5 6 * 17232891000 7+ 17238ZE2310 8+ 17239ZE1000 9 17410ZE2020 12 90325044000 13 90009ZE2003 14 9405006000 15 17235ZE2820 PART NAME QTY. REMARKS PACKING, ELBOW 1 ELEMENT,AIR CLEANER(DUAL) .............. 1 ...................... INCLUDES ITEM W/ * FILTER, OUTER 1 COVER, AIR CLEANER 1 GROMET,AIR CLEANER 1 COLLAR,AIR CLEANER 2 COLLAR(B),AIR CLEANER 1 ELBOW COMP.,AIR CLEANER ................
GX270K1SMX2 — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 48 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. PART NO. 1 14100ZE3020 2 14410ZE2013 3 14431ZE2010 4 14441ZE2000 5 14451ZE1013 6 14568ZE1000 * 7 14711ZE2000 8 14721ZE2000 9 14751ZE2003 10 14771ZE2000 11 14773ZE2000 12 14781ZE2000 13 14791ZE2010 14 90012ZE0010 15 90206ZE1000 16 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSY .................................... 1 ...................... INCLUDES ITEM W/ * ROD,PUSH 2 ARM,VALVE ROCKER 2 LIFTER,VALVE 2 PIBOT,ROCKER ARM 2 SPRING,WEIGHT RETURN 1 VALVE, IN.
GX270K1SMX2 — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 50 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CARBURETOR ASSY. CARBURETOR ASSY. NO. PART NO.
GX270K1SMX2 — CONTROL ASSY. CONTROL ASSY. PAGE 52 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CONTROL ASSY. CONTROL ASSY. NO. PART NO. 1 16551ZE2000 2 16555ZE2000 3 16561ZE2000 4 16562ZE2000 6 16570ZE2W10 10 * 16571ZE2W00 11 16574ZE1000 * 12 * 16575ZE2W00 13 16576891000 * 15 * 16578ZE1000 16 * 16581ZE2W00 17 16584883300 * 19 * 16592883310 20 * 16594883010 24 90013883000 25 90015ZE5010 27 90114SA0000 * 90605230000 28 * 93500040060H 30 * 93500050280A 32 * 93500050160A 33 * 9405006000 35 PART NAME QTY.
GX270K1SMX2 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 54 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. PART NO. 2 11300ZH9S50 3 11381ZE2801 4 15600735003 6 15600ZG4003 8% 15625ZE1003 9 16510ZE2000 * 10 + 16511ZE2000 * 11 + 16512ZE2000 * 12 + 16513ZE2000 * 16531Z0A000 13 * 90602ZE1000 15 * 90701HC4000 16 17 * 91201890003 9410106800 18 * 19 957010803500 20 961006206000 * PART NAME QTY. REMARKS COVER ASSY., CRANKCASE .................. 1 ...................... INCULDES ITEM W/ * PACKINNG,CASE COVER 1 CAP ASSY.,OIL FILLER ...........................
GX270K1SMX2 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 56 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. PART NO. 1 13310ZH9000 9 92101080250A 11 90534706010 12 951400110 13 91001ZH9003 * PART NAME QTY. REMARKS CRANK SHAFT COMP. ............................. 1 ...................... INCULDES ITEM W/ * BOLT 8X25 1 WASHER,LOCK 8MM 1 KEY 7X7X35 1 BEARING, BALL (6206 SH) 1 MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 58 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. PART NO. 1 12000ZH9406 2 15510ZE2043 3 16541ZE2010 6 90131883000 7 90446KE1000 9 91201890003 * 10 91353671004 11 9405010000 12 9410912000 13 9425110000 14 957010601200 16 34150ZH7003 17 90013883000 19 90131ZE3790 20 9280012000 PART NAME QTY. REMARKS BARREL ASSY.,CYLINDER ...................... 1 ...................... INCULDES ITEM W/ * SWITCH ASSY,OIL LEVEL 1 SHAFT,GOVERNOR ARM 1 BOLT,DRAIN PLUG 2 WASHER 8.2X17X0.
GX270K1SMX2 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 60 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. PART NO. 1 12200ZH9000 2 * 12204ZE2306 3 * 12205ZE2305 4 12216ZE2300 * 5 12251ZH9000 6 12310ZE2020 7 950051110030 8 12391ZE2020 9 14775ZE2010 11 90014ZE2000 12 90042ZE2000 13 92900080320E 14 90441ZE2010 15 9430112200 16 957251008000 17 9807955846 PART NAME QTY. REMARKS HEAD COMP.,CYLINDER ......................... 1 ...................... INCULDES ITEM W/ * GUIDE,IN.VALVE(OVERSIZE) 1 GUIDE,EX.
GX270K1SMX2 — FAN COVER ASSY. FAN COVER ASSY. PAGE 62 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — FAN COVER ASSY. FAN COVER ASSY. NO. PART NO. 3 16731ZE2003 5 19610ZE2010ZC 7 19631ZE2D00 11 36100ZH7003 17 90013883000 18 90013883000 22 90684ZA0601 PART NAME CLIP,TUBE COVER COMP.,FAN /BLACK SHROUD STOP SWITCH ASSY. FLANGE BOLT 6X12 FLANGE BOLT 6X12 CLIP, HARNESS QTY. 1 1 1 1 5 1 1 REMARKS MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 64 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. PART NO. 1 19511ZE2000 4 28451ZE2W01 5 31100ZE2010 8 90201ZE3V00 9 90741ZE2000 PART NAME FAN, COOLING PULLEY, STARTER FLYWHEEL COMP. NUT,SPECIAL 16MM KEY,SPECIAL WOODRUFF25X18 QTY. 1 1 1 1 1 REMARKS MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 66 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — FUEL TANK ASSY. FUEL TANK ASSY. NO. PART NO. 1 16854ZH8000 2 16955ZE1000 5 17510ZE2020ZD 7 17620Z0T814 9 17672ZE2W01 12 91353671004 14 9405008000 15 950014522240 16 9500202080 17 957010802500 22 17631Z0T812 * PART NAME QTY. REMARKS RUBBER,SUPPORT(107MM) 1 JOINT,FUEL TANK 1 TANK COMP., FUEL NH1 1 CAP COMP., FUEL FILLER ...................... 1 ...................... INCLUDES ITEM W/ * FUEL FILTER 1 O-RING 14MM 1 FLANGE NUT M8 2 TUBE, FUEEL 4.
GX270K1SMX2 — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 68 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. PART NO. 1 30500-ZF6-W02 4 30700-ZE1-013 8 31512-ZE2-000 10 36101-ZE1-010 13 90015-883-000 PART NAME COIL AY,IGNITION/GX390 CAP ASSY. GROMMET,CORD CORD,STOP SWITCH 370MM FLANGE BOLT 6X28 QTY. 1 1 1 1 1 REMARKS MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — MUFFLER ASSY. MUFFLER ASSY. PAGE 70 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — MUFFLER ASSY. MUFFLER ASSY. NO. PART NO. 2 18310ZE2W00 3 18320ZE2W01 4 18323ZE2W00 5 18330ZE2W00 7 18333ZE3800 8 18355ZE2010 9 18381ZE2W10 18 90013883000 19 90050ZE1000 26 9405008000 29 90050ZE1000 PART NAME MUFFLER COMP. PROTECTOR COMP.,MUFFLER PROTECTOR, EXHAUST PIPE PIPE,EXHAUST GASKET ARRESTER, SPARK GASKET,MUFFLER(ARRESTER) FLANGE BOLT 6X12 TAPPING SCREW 5X8 FLANGE NUT M8 TAPPING SCREW 5X8 QTY. 1 1 1 1 1 1 1 1 6 3 1 REMARKS MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — PISTON ASSY. PISTON ASSY. PAGE 72 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — PISTON ASSY. PISTON ASSY. NO. PART NO. 1 13010ZE8601 2 13101ZH9000 3 13111ZE2000 4 13200E2010 5 90001E8000 * 90551E1000 6 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 PISTON (STD) 1 PIN ,PISTON 1 ROD ASSY., CONNECTING (STD) ........... 1 ...................... INCLUDES ITEM W/ * BOLT, CONNECTING ROD 2 CLIP, PISTON PIN 18MM 2 MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — RECOIL STARTER GX270K1-SMX2 ENGINE — RECOIL STARTERASSY. ASSY. RECOIL STARTER ASSY. PAGE 74 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — RECOIL STARTER GX270K1-SMX2 ENGINE — RECOIL STARTERASSY. ASSY. RECOIL STARTER ASSY. NO. PART NO. 1 28400ZE2W01ZB 2 28410ZE2W01ZB * 3 * 28421ZE2W01 4 * 28422ZE2W01 5 28441ZE2W01 * 6 * 28442ZE2W01 7 * 28443ZE2W01 8 28444ZE2W01 * 10 * 28461ZE2W02 11 28462ZE2W11 * 13 * 90004ZE2W01 14 90008ZE2003 PART NAME QTY. REMARKS RECOIL STARTER AY/GX240,B ............... 1 .....................INCLUDES ITEM W/ * CASE COMP.
GX270K1SMX2 — LABELS ASSY. LABELS ASSY. PAGE 76 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GX270K1SMX2 — LABELS ASSY. LABELS ASSY. NO. PART NO. 3 87521ZH9030 7 87522ZH9010 10 87528ZE2810 17 87532ZH8810 PART NAME EMBLEM RABEL /GX120K1 MARK,CHOKE(ORANGE) LABEL QTY. 1 1 1 1 REMARKS MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITION OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES NOTES MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.
