OPERATION AND PARTS MANUAL © COPYRIGHT 2003, MULTIQUIP INC. Vibration Roller Model MRH-800DS (Diesel) Revision #3 (02/02/05) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT 800-421-1244 FAX: 310- 537-4259 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310- 631-5032 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
TABLE OF CONTENTS Proposition 65 Warning ............................................. 2 Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 MIKASA MRH-800DSVIBRATION ROLLER Safety Message Alert Symbols .............................. 6-7 Rules for Safe Operation ........................................ 8-9 Operation and Safety Decals ...............
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Ground orders are treated as “Standard Orders”, and will ✓ FedEx or UPS Second Day or Third Day ship within 24 hou
MRH-800DS — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model MRH-800DS Vibration Roller.
MRH-800DS — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the vibration roller is not in use. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection. Other important messages are provided throughout this manual to help prevent damage to your vibration roller, other property, or the surrounding environment.
MRH-800DS — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the MIKASA MRH-800DS Vibration Roller: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MRH-800DS — RULES FOR SAFE OPERATION ■ ALWAYS use extreme care when operating near obstructions, on slippery surfaces, grades and side slopes. ■ When reversing, particularly on the edges and banks of ditches, as well as in front of obstacles, the operator must stay in a standing position at a safe distance from the machine. ■ When operating near any house/building or pipelines, always check the effect of machine vibration. Stop the work if necessary.
MRH-800DS — OPERATION AND SAFETY DECALS Figure 1 displays the operation and safety decals as they appear on the vibration roller. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set. Figure 1. Operation and Safety Decals PAGE 10 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS — OPERATION AND SAFETY DECALS Figure 1. Operation and Safety Decals (Continued) MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS — ROLLER SPECIFICATIONS TABLE 1. MRH-800GS VIBRATION ROLLER SPECIFICATIONS Dimensions 105 x 27.2 x 41.7 in (2670 x 692 x 1060 mm) Drum Diameter 16 in. (406 mm) Drum Width 25.6 in. (650 mm) Curb Clearance 9.6 in. (243 mm) Side Overhang .83 in.(21 mm) Operating Weight (with water) 1562 lbs. (710 kg) Vibration Frequency 3,300 vpm Centrifugal Force 23.
MRH-800DS — ENGINE SPECIFICATIONS Table 2. ENGINE SPECIFICATIONS (YANMAR) Engine Model YANMAR L100EE-DEVMK1 Engine Type Air-cooled Diesel Cylinder Bore X Stroke 3.46 x 2.75 in (88 x 70 mm) Displacement 13.7 fl oz (406 cc) Maximum Ouput 10 HP Fuel Tank Capacity 5.8 quar ts (5.5 liters) Oil Capacity 1.74 quar ts (1.65 liters) Dry Net Weight 116.6 lbs. (53 kg) Dimensions (L x W x H) 16.4 x 18.5 x 19.
MRH-800DS— VIBRATION ROLLER DIMENSIONS TABLE 3. DIMENSIONS LENGTH A 105 in. 2670 mm. B 57 in. 1445 mm. C 10 in. 255 mm. D 22.8 in. 580 mm. E 13.8 in. 350 mm. F 27.2 in. 692 mm. G 13.6 in. 346 mm. H 78.3 in. 1990 mm. I 46.5 in. 1180 mm. J 37.4 in. 950 mm. K 41.7 in. 1060 mm. L 9.6 in. 245 mm. WIDTH HEIGHT Figure 2. MRH-800DS Vibration Roller Dimensions PAGE 14 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS— FEATURES The Mikasa Model MRH-800DS is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for backfilling for gas pipelines, water pipelines and cable installation work. The impact force of the MRH-800DS levels and uniformly compacts voids between soil particles to increase dry density. Features include: Hydraulic transmission to allow speed change without gear shifting.
MRH-800DS— VIBRATION ROLLER COMPONENTS 1 2 4 3 8 9 5 6 10 11 7 Figure 3. MRH-800DS Vibration Roller Components PAGE 16 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS— VIBRATION ROLLER COMPONENTS Figure 3 illustrates the location of the major components for the MRH-800DS Vibration Roller. The function of each component is described below: 1. Fuel Tank/Cap – Fill with diesel fuel. Fuel tank holds approximately 2 gallons (7.5 liters). DO NOT top off fuel. Wipe up any spilled fuel immediately. 2. Center Cover – When opened and supported by strut, provides access to oil pump and filter, battery, V-belt, and clutch box. 3.
MRH-800DS— HANDLE BAR/LEVER COMPONENTS 1 3 4 2 6 5 Figure 4. MRH-800DS Lever Components PAGE 18 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS — HANDLE BAR/LEVER COMPONENTS HANDLE BAR/LEVER COMPONENTS Figure 4 illustrates the location of the major lever components on the handle bar of the machine. Each component is described below: 1. Travel Lever – Controls the direction of travel of the machine (forward and reverse). 2. Horn Button – When pressed, gives a warning sound of the machine approaching. 3. Vibration Lever – Turns vibration on and off. 4. Throttle Lever – Controls the start up of the machine. 5.
MRH-800DS— ENGINE COMPONENTS Figure 5. MVH-402DSB Engine Components ENGINE COMPONENTS Figure 5 illustrates the location of the major engine components of the machine. Each component is described below: 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tighten securely. DO NOT over fill. 2. Fuel Tank – Diesel engine holds 5.8 quarts of diesel fuel. 3. Air Cleaner – Prevents dirt and other debris from entering the fuel system.
NOTE PAGE MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS— INSPECTION DANGER 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. NEVER operate the compactorin a confined area or enclosed area structure that does not provide ample free flow of air. 4. If the oil level is low, fill to the edge of the oil filler hole with the recommended oil type (Table 3). Maximum oil capacity is 1.16 quarts (1.1 liters). Checking The Hydraulic System 1.
MRH-800DS— INSPECTION Checking The Vibrator Oil Level Checking Levers and Horn 1. Check vibrator casing for any oil leakage. 1. 2. If any leakage is noticed, remove the level plug on the side of the plate (Figure 9). Check travel, vibration, and throttle levers to make sure they are functioning properly (Figure 4). 2. With travel lever placed in reverse, push the deadman device and verify that the travel lever returns to neutral position.
MRH-800DS— INITIAL STARTUP 5. CAUTION : Insert the starter key into the key switch and turn it to the RUN position (Figure 14). The buzzer should sound at this time. DO NOT attempt to operate the roller until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the roller.
MRH-800DS— INITIAL STARTUP Recoil Start 5. 1. Move the throttle lever to the RUN position. 2. Open the fuel cock by turning it clockwise to the down position (Figure 16). Pull the starting handle hard and fast to start engine (Figure 19). Fuel Cock (Open Position) Figure 19. Engine Start Handle 6. Figure 16. Open Fuel Cock 3. If the engine does not star t, repeat steps 3 through 5. Pull the starting handle slowly until you feel some resistance (Figure 17). Return handle to original position.
MRH-800DS—OPERATION TRAVELING VIBRATING 1. 1. Before starting to travel, make sure to release parking brake located on the left side of the rear roller. If the parking brake lever is tight, moving the roller back and forth will make it easier (Figure 20). Shift the vibration lever AWAY from its OFF position. The vibration lever will automatically spring forward and the roller will start vibrating (Figure 21). Parking Brake (Released Position) 2. Off Position of Vibration Lever Figure 20.
MRH-800DS—OPERATION SAFETY FEATURES 1. A horn is provided to warn of approach. 2. The dead man device prevents accidental traveling in reverse. It automatically makes the travel lever return to neutral position by stopping the machine when an object comes in contact with the dead man device. Bypass Valve Bolt STOPPING 1. With travel lever in the NEUTRAL position, and the vibration lever in the OFF position, return the throttle lever to the START position.
MRH-800DS—MAINTENANCE CAUTION: CAUTION: Inspection and other services should ALWAYS be carried out on hard and level ground with the engine shutdown. Fuel piping and connections should be replaced every 2 years. Inspection and Maintenance Service Tables. TABLE 6. MRH-800DS ENGINE CHECK 1. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7. TABLE 5.
Engine Oil Replacement: MRH-800DS—MAINTENANCE CAUTION: 1. Replace engine oil in the first 25 hours of operation and every 50 to 100 hours afterwards. NEVER attempt to check the V-belt with the engine running. Severe injury can occur if your hand gets caught between the V-belt and the clutch (Figure 26). Always use safety gloves. 2. Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's Manual). CLUTCH PULLEY Air Filter 1.
MRH-800DS—MAINTENANCE MACHINE MAINTENANCE 1. At the end of each day’s operation, wash down dust and dirt off the machine. Clean area around drums ad scrapers making sure all mud is removed. 2. Drain water tank completely. 3. Cover the machine to prevent dust and store in dry place away from sun exposure. LONG TERM STORAGE z DO NOT close the exhaust outlet of battery. The gas pressure building up in the battery may cause explosion.
MRH-800DS—MAINTENANCE FORWARD AND REVERSE TRAVEL ADJUSTMENT 1. If neutral position for forward and reverse travel has been displaced, conduct the neutral adjustment. 2. If roller travels forward with the ball of ball plunger remaining in V slot of the guide, loosen M8 bolt and slide the slide plate slightly toward the engine. If the roller travels backward, slide the plate towards side plate (Figure 28). Plunger M8 Bolt 3. 4. Guide Slide Plate Figure 28.
MRH-800DS—MAINTENANCE TABLE 8. MRH-800DS LUBRICATION CHART ITEM MAINTENANCE NEEDED Vibrator Oil Replace Oil Engine Oil Replace Oil FREQUENCY Every 300 Hours of Operation Initially - After 10 to 20 Hours of Operation Thereafter - Every 50 to 100 Hours of Operation TYPE SAE10W30 (1.
MRH-800DS—MAINTENANCE Handle Bar Release Pin Grease Fitting Vibrator Oil Drain Plug Figure 32. Handle Bar Maintenance Vibrator Oil Level Plug Figure 29. Vibrator Oil Maintenance Clutch Box Grease Fitting FIgure 30. Bearing Cover Grease Fitting Figure 33. Clutch Box Maintenance Bearing Cover Grease Fitting Figure 31. Bearing Cover Maintenance Hydraulic Oil Filter Figure 34. Hydraulic Oil Filter Location MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
NOTE PAGE PAGE 34 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS— ROLLER TROUBLESHOOTING TABLE 9. TROUBLESHOOTING SYMPTOM Unit does not travel. POSSIBLE PROBLEM SOLUTION Parking brake still engaged? Release parking brake lever. Defective centrifugal clutch? Repair or replace clutch. Damaged rubber coupling and flange? Replace rubber coupling and flange. Defective travel cable and link? Repair or replacetravel cable and link. Damaged scraper or too much mud in scraper? Replace or repair scraper. Unit does not travel or travel is not smooth.
MRH-800DS— ENGINE TROUBLESHOOTING TABLE 10. ENGINE TROUBLESHOOTING SYMPTON POSSIBLE PROBLEM SOLUTION Speed control lever is in "STOP" position? Set speed control lever to "START" position. Engine will not star t or star t is delayed, although engine can be turned over. At low temperatures engine will not star t. Engine fires but stops soon as star ter is switched off. Engine stops by itself during normal operation. No fuel reaching injection pump? Add fuel. Check entire fuel system.
MRH-800DS— ENGINE TROUBLESHOOTING TABLE 10. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTON Low engine power, output and sp e e d . Low engine power output and low speed, black exhaust smoke. POSSIBLE PROBLEM SOLUTION Fuel tank empty? Replace fuel filter. Fuel filter clogged? Replace fuel filter. Fuel tank venting is inadequate? Ensure that tank is adequately vented. Speed control lever does not remain in selected position? See engine manual for corrective action.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
SUGGESTED SPARE PARTS MRH-800DS VIBRATION ROLLER 1 TO 3 UNITS WITH YANMAR L100EE-DEVMK2 DIESEL ENGINE Qty. P/N Description 1 ............ 954401890 ...... FILTER, WATER TANK 2 ............ 954001380 ...... FILTER, HYDRAULIC OIL 2 ............ 070503000 ...... V-BELT, ENGINE 1 ............ 956100022 ...... THROTTLE WIRE 1 ............ 954300340 ...... CAP, WATER TANK 2 ............ 070100381 ...... V-BELT, VIBRATOR ASSY. 1 ............ 71487553101 .. VALVE ASSY., FUEL INJECTOR 1 ............ 71465651110 ..
MRH-800DS VIBRATION ROLLER — DECAL PLACEMENT DECAL PLACEMENT PAGE 40 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — DECAL PLACEMENT PLACEMENT NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PART NO. 920205690 9202009660 920206280 920102490 920101480 DCL210 920108070 920100120 920208070 920206160 920206200 920203330 920201910 920101510 920200320 920207620 920206290 920202810 920104280 920200470 920202870 920205640 920105170 920202860 920201450 920202920 920205680 920106760 PART NAME QTY. REMARKS DECAL, BRAKE LEVER ..................................1 ......
MRH-800DS VIBRATION ROLLER — AXLE ASSY. AXLE ASSY. PAGE 42 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — AXLE ASSY. AXLE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 PART NO.
MRH-800DS VIBRATION ROLLER — BASE ASSY. BASE ASSY. PAGE 44 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — BASE ASSY. BASE ASSY. NO. 1 2 3 4 5 6 7 8 10 11 12 13 14 15 15 16 17 18 30 32 33 34 35 36 56 57 58 59 60 61 63 64 66 67 68 68A * 68-1+ 68-2+ 69 72 73 91 92 93 94 95 96 PART NO.
MRH-800DS VIBRATION ROLLER — FRONT GUARD ASSY. FRONT GUARD ASSY. PAGE 46 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — FRONT GUARD ASSY. FRONT GUARD ASSY. NO. 75 76 77 78 79 80 81 82 84 PART NO. 031110160 030210250 001221035 515336200 515336210 515449720 001221040 031110160 953405940 PART NAME FLAT WASHER, M10 LOCK WASHER, M10 BOLT 10x35 mm FRONT GUARD BUMPER SPACER, BUMPER BOLT 10X40 T WASHER, FLAT M10 PIPE INSERT PZ-7 QTY. 2 2 2 1 2 4 4 4 2 REMARKS MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — SIDE COVER ASSY. SIDE COVER ASSY. PAGE 48 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — SIDE COVER ASSY. SIDE COVER ASSY. NO. 3 20 21 24 25 26 27 29 31 32 33 34 35 36 38 39 40 97 98 99 170 171 172 173 174 175 176 177 178 179 PART NO. 030210250 515336250 515449890 515334600 515010090 515010100 092004008 515113080 515447030 012210020 031110160 0105050616 030206150 952404470 0105091025 515447380 607010080 091004016 031104080 020304030 515114870 515214240 515450780 515450790 091004015 031104080 030204100 001220815 031108160 030208200 PART NAME QTY.
MRH-800DS VIBRATION ROLLER — WATER TANK ASSY. WATER TANK ASSY. PAGE 50 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — WATER TANK ASSY. WATER TANK ASSY. NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 62 65 70 71 71 74 75 76 86 87 PART NO. 515114200 954300340 001241030 033910010 022910180 954404910 954404890 953404900 959404880 506403990 953404000 506434680 506434690 001221253 030212300 954405680 515447000 515449870 515448290 517338540 001220610 031106100 030206150 515449880 952405950 PART NAME WATER TANK CAP, WATER TANK /MR BOLT 10X30 U WASHER 10.
MRH-800DS VIBRATION ROLLER — HYDRAULIC SYSTEM ASSY. HYDRAULIC SYSTEM ASSY. PAGE 52 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — HYDRAULIC SYSTEM ASSY. HYDRAULIC SYSTEM ASSY. NO. 7 7-1 * 7-2 * 8 9 10 11 12 14 14 15 16 17 18 19 20 21 22 23 24 25 26 27 27 28 29 29 30 31 32 33 34 35 36 37 38 39 40 41 PART NO.
MRH-800DS VIBRATION ROLLER — HYDRAULIC SYSTEM ASSY. HYDRAULIC SYSTEM ASSY. PAGE 54 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — HYDRAULIC SYSTEM ASSY. HYDRAULIC SYSTEM ASSY. NO. 42 43 44 45 46 47 48 49 50 51 52 53 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 81 82 83 84 PART NO.
MRH-800DS VIBRATION ROLLER — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. PAGE 56 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. NO. 1 1 2 3 4 5 13 18 34 47 54 PART NO. 515114221 515010140 953405840 953402930 953400270 953405260 959010120 030210250 012210035 031110160 0105091025 PART NAME QTY. REMARKS OIL TANK , (GREEN) 1 OIL TANK , (ORANGE) 1 DRAIN PLUG M18 ........................... 1 ...... REPLACES 953102781 COPPER PACKING 19X30X1 1 PLUG 1/4X14 10L 1 PACKING 1/4 (CU) 1 LEVEL GAUGE/L =60 1 WASHER, LOCK M10 22 BOLT 10X35 T ............................
MRH-800DS VIBRATION ROLLER — ENGINE ASSY. ENGINE ASSY. (YANMAR L100EE-DEVMK2) PAGE 58 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — ENGINE ASSY. ENGINE ASSY. (YANMAR L100EE-DEVMK2) NO. 1 8 9 10 11 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 55 56 81 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 PART NO.
MRH-800DS — ELECTRIC DEVICE ELECTRIC DEVICE (YANMAR L100A) ASSY. PAGE 60 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS — ELECTRIC DEVICE ELECTRIC DEVICE (YANMAR L100A) ASSY. NO. 1 1A * 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 27 28 29 30 31 32 33 34 35 36 37 38 46 47 48 49 52 53 54 55 57 70 PART NO.
MRH-800DS VIBRATION ROLLER — CLUTCH (VIBRATION) ASSY. CLUTCH (VIBRATION) ASSY. PAGE 62 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — CLUTCH (VIBRATION) ASSY. CLUTCH (VIBRATION) ASSY. NO. A 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 * 28 * 29 * 30 * 31 * PART NO.
MRH-800DS VIBRATION ROLLER — VIBRATOR ASSY. VIBRATOR ASSY. PAGE 64 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — VIBRATOR ASSY. VIBRATOR ASSY. NO. 1 2 2-1 3 3-1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25 27 PART NO. 515113090 515334110 515334111 515334120 515334121 515334130 001521252 040406308 501011020 501011000 951400080 952400900 012212030 030212300 953405570 060206020 080100900 515447040 951400090 952401590 070100381 515334140 515334150 014208020 030208200 894230 001221430 001221425 031108160 PART NAME QTY. REMARKS VIBRATING CASE 1 ROTARY SHAFT, DRIVE ...........
MRH-800DS VIBRATION ROLLER — UPPER CONTROL ARM ASSY. UPPER CONTROL ARM ASSY. PAGE 66 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — UPPER CONTROL ARM ASSY. UPPER CONTROL ARM ASSY. NO. 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 40 41 42 43 44 45 46 47 49 PART NO. 959403840 953402930 509010130 952405700 952403690 020418110 515447410 011208030 030208200 02108060 501011162 011206020 952404470 030206150 515334230 509326970 080200180 509436911 011208035 515334240 959404760 959404370 025910080 0105050616 PART NAME QTY. REMARKS BAR GRIP, I.D. 12MM 2 COPPER PACKING 19X30X1 3 BUSHING MB1825DU 3 WASHER 19X49X0.
MRH-800DS VIBRATION ROLLER — UPPER CONTROL ARM ASSY. (CONT.) UPPER CONTROL ARM ASSY. (CONT.) PAGE 68 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — UPPER CONTROL ARM ASSY. (CONT.) UPPER CONTROL ARM ASSY. (CONT.) NO. 53 55 56 57 59 60 61 62 63 64 65 66 67 70 92 93 94 95 96 97 100 101 170 180 201 PART NO. 951401431 952404790 032212250 0039312000 515334820 509010140 515447720 030212300 509436980 509436990 507010110 509436960 014206010 959405920 515336490 515212950 515334460 515336500 509326320 509436950 011006010 030206150 011208030 517338590 956100022 PART NAME QTY.
MRH-800DS VIBRATION ROLLER — LOWER CONTROL ARM ASSY. LOWER CONTROL ARM ASSY. PAGE 70 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
MRH-800DS VIBRATION ROLLER — LOWER CONTROL ARM ASSY. LOWER CONTROL ARM ASSY. NO. 2 3 4 5 6 16 18 20 21 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37 38 44 50 68 71 72 91 PART NO. 001222055 031120320 032220450 020320160 022522017 030208200 501011162 952404470 030206150 515334230 515335780 025406032 030210250 001220635 515450560 022710607 505015150 020116130 509321160 012210020 515448170 515448180 014206015 011008015 031108160 515334240 515447180 506010070 959021911 501910010 515115910 PART NAME QTY.
YANMAR L100EE DEVMK2 — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. PAGE 72 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE DEVMK2 — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY.
YANMAR L100EE DEVMK2 — CYLINDER HEAD AND COVER ASSY. CYLINDER HEAD AND BONNET ASSY. PAGE 74 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE DEVMK2— CYLINDER HEAD AND COVER ASSY. CYLINDER HEAD AND COVER ASSY. NO PART NO PART NAME QTY. REMARKS 1 11465111020 CYLINDER HEAD 1 6 11465111100 VALVE, SUCTION 1 7 11465111110 VALVE, EXHAUST 1 8 11465011121 SPRING, VALVE 2 9 11962011180 RETAINER, SPRING 2 10 11465111250 SUPPORT CMP, ARM ............................... 1 ................. INCLUDES ITEMS W/ * 11 11465111260 SUPPORT, ROCKER ARM 1 * 12 11465111650 ARM ASSY.
YANMAR L100EE-DEVMK2— MUFFLER ASSY. MUFFLER ASSY. PAGE 76 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— MUFFLER ASSY. MUFFLER ASSY. NO PART NO 17 11465013201 24 11497013551 25 16026001580 26* 11497013561 27* 11497013700 28* 11497013710 30* 26106080182 31* 26216080182 32 26366080002 37 10519813621 40# 10509813990 41 11498513701 42+ 10509813990 43+ 26113060082 PART NAME QTY. REMARKS GASKET, NON-ASB. 1 MUFFLER ASSY. ...................................... 1 .................
YANMAR L100EE-DEVMK2— AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 78 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— AIR CLEANER ASSY. AIR CLEANER ASSY. NO PART NO 1 11465012211 2 71465012560 4 11465012520 5* 11465012530 6* 11425212560 7* 11465012590 10* 11425212550 11* 11425012300 12 11469912020 13 11465012301 14 26106060252 15 26226060142 16 26226060752 PART NAME QTY. REMARKS GASKET, AIR CLEANER 1 CLEANER ASSY. AIR ............................... 1 .................
YANMAR — CRANKSHAFT, PISTON AND CAMSHAFT ASSY. CRANKSHAFT, PISTON AND CAMSHAFT ASSY. PAGE 80 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR — CRANKSHAFT, PISTON AND CAMSHAFT ASSY. CRANKSHAFT, PISTON AND CAMSHAFT ASSY. NO PART NO PART NAME QTY. REMARKS 1 71466014100 CAMSHAFT ASSY., D 1 6 11465014200 TAPPET 2 7 11477114260 TAPPET, F.O. 1 8 11465014401 ROD, PUSH 2 12 71465421730 CRANKSHAFT ASSY. 1 20 12271001220 NUT, M18 1 21 11465021551 WASHER, FLYWHEEL 1 22 11466221593 FLYWHEEL, DEJ., W/GEAR ..................... 1 .................
YANMAR L100EE-DEVMK2— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP AND GOVERNOR ASSY. PAGE 82 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP AND GOVERNOR ASSY. NO PART NO PART NAME QTY. REMARKS 1 11465032010 PUMP ASSY. LUB. OIL 1 6 11425032070 COVER, LUB. OIL PUMP 1 7 10333832570 O-RING 1 8 22312030160 PARALLEL PIN 3 X 16 1 9 26476060142 BOLT, M 6 X14, TAPPING 3 10 11425035110 STRAINER, LUB. OIL ASSY. .................. 1.................... INCLUDES ITEMS W/ * 11 11425035070 STRAINER, LUB. OIL 1 * 12 24341000224 O-RING 1A S-22.
YANMAR L100EE-DEVMK2 — COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. PAGE 84 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. NO PART NO PART NAME QTY. REMARKS 1 11465045201 COVER 1 2 11435045320 RUBBER, SEAL 1 3 11435045340 COLLAR 1 4 18372055210 GROMMET 1 5 26106060202 BOLT M 6 X 20 PLATED 1 6 11466845102 CASE, FAN SILVER 17 1 7 11425045301 RUBBER, CUSHION 4 8 11425045310 COLLAR 4 9 11465045330 SEAL, FAN CASE 1 10 11437045351 BOLT, FAN CASE 4 11 11466076052 RECOIL STARTER D ASSY. .................. 1....................
YANMAR L100EE-DEVMK2— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. PAGE 86 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. NO PART NO PART NAME QTY. REMARKS 2 71465651110 PUMP ASSY., FUEL INJECTORS .......... 1.................... INCLUDES ITEMS W/ * 3 10554651020 GASKET 1 * 4 11425051080 PLATE 1 5* 11497051100 BODY, F.I. PUMP 1 10* 11425051160 SPRING 1 11* 11465051300 VALVE ASSY., DELIVERY 1 14* 10554651330 SPRING, DELIVERY VALVE 1 15* 11425051340 HOLDER, F. I. P. DELIVERY 1 16* 12455051350 GASKET, DELIVERY 2 17* 11425051600 LEVER ASSY.
YANMAR L100EE-DEVMK2 — FUEL TANK AND FUEL PIPE ASSY. FUEL TANK AND FUEL PIPE ASSY. PAGE 88 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — FUEL TANK AND FUEL PIPE ASSY. FUEL TANK AND FUEL PIPE ASSY. NO PART NO PART NAME QTY. REMARKS 1 71465055130 TANK ASSY., FUEL ................................ 1 .................... INCLUDES ITEMS W/ * 3 11428855041 CAP ASSY., FUEL TANK ........................ 1 ....................
YANMAR L100EE-DEVMK2 — STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR AND DYNAMO ASSY. PAGE 90 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR AND DYNAMO ASSY. NO PART NO PART NAME QTY. REMARKS 1 11436277011 STARTER, S114-651A ............................ 1 .................... INCLUDES ITEMS W/ * 2 11438177110 ARMATURE 1 * 3 X2114811000 WASHER KIT, THRUST 1 4* X2114715500 STOPPER SET, PINION 1 5* 11438177130 COIL ASSY., FIELD 1 6* 11438177140 COVER, REAR 1 7* 11437177160 HOLDER ASSY., BRUSH ........................ 1 ....................
YANMAR L100EE-DEVMK2 — TOOL LABEL AND GASKET SET ASSY. TOOL LABEL AND GASKET SET ASSY. PAGE 92 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — TOOL LABEL AND GASKET SET ASSY. TOOL LABEL AND GASKET SET ASSY. NO PART NO PART NAME 4 5 6 7 26 27 28* 29* 30* 31* 32* 33* 34* 35* 36* 37* 38* 39* 40* 41* 42* * 11425007090 11425007111 11426807240 11426107350 71465192620 11465101330 11465001380 11465001412 11429901950 11425001841 22190160002 11465011340 11477111461 11465111310 11465012301 11465012211 11465013201 10333832570 24341000224 24311000125 23414080000 QTY.
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. 6.
NOTE PAGE MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT 800-421-1244 FAX: 310- 537-4259 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310- 631-5032 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 800-421-1244 FAX: 310-537-3927 E-MAIL: mq@multiquip.com WWW: multiquip.
