PARTS AND OPERATION MANUAL PLASTER / MORTAR MIXERS © COPYRIGHT 2001, MULTIQUIP INC. WM-700S WM-700P Revision #7 (06/26/01) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
TABLE OF CONTENTS Here's how To Get Help .......................................... 3 Table Of Contents ................................................... 4 Parts Ordering Procedures ..................................... 5 Rules for Safe Operation & Safety Decals .............. 6 Warranty .................................................................. 7 WHITEMAN — 700S & 700P Operations ......................................................... 8-10 Specifications .......................................
PARTS ORDERING PROCEDURES n n n n n n n Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: • • • • UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* • • Airborne Express* Truck or parcel post *Normally shipped the same day the order
RULES FOR SAFE OPERATION & SAFETY DECALS ■ Do not operate or service this equipment before reading the operating and maintenance instructions manual or serious injury may result. ■ Do not operate this equipment unless all guards and safety devices are attached and in place. ■ Stop the engine when leaving the equipment. ■ When towing, an adequate safety chain must be fastened to the frame, refer to page 9. ■ Keep all inexperienced and unauthorized people away from the equipment at all times.
WARRANTY There are no warranties, express or implied, made by Multiquip Inc. hereunder on Products manufactured or distributed by it except the warranty against defects in material and workmanship on new Products to the original purchaser, as hereinafter set forth. Multiquip Inc. warrants Products manufactured by it to be free from defects in material and workmanship under normal and proper use and servicing for the periods specified on the bottom of this page.
WM-700S, 700P — OPERATIONS Refer to the following chart. For recommend plug sizes. MOTOR 115 VOLT 1Ø WM 700 230 VOLT 1Ø WM 900 HORSE POWER PIGTAIL CAP CONN BODY NEMA/ NEMA/ WHITEMAN WHITEMAN PIGTAIL CAP CONN BODY NEMA/ NEMA/ WHITEMAN WHITEMAN 1½ & 3 HP L5-30P/940545 L5-30R/940546 L6-15P/940550 L6-15R/940551 CONTROLS GENERAL KILL SWITCH: (Gasoline Engine Only) Located on the side of the engine cover.
WM-700S, 700P — OPERATIONS BEARING BRACKET Grease the bearing bracket every month. COUNTERSHAFT NOTE: It is critical that the length of chain be properly adjusted to prevent the Draw Bar and front mixer stand from dropping to the ground (contact) in the event the Draw Bar becomes disconnected from the towing vehicle. STEP 1 The countershaft rotates on two self-aligned pillow block bearings. Grease these every 40 hours using grade #1 Lithium Base grease.
WM-700S, 700P — OPERATIONS DANGER BEFORE TOWING The following is the recommended wiper blade adjustments: 1) STEEL DRUM MIXERS SIDE SCRAPER BALL HITCH COUPLER 1. Check vehicle hitch, ball, and coupler for signs of wear or damage. Replace any parts that are worn or damaged before towing. 2. Use only the 2" ball diameter as indicated on your coupler. Use of any other ball diameter will create an extremely dangerous condition which can result in separation of the coupler and ball or ball failure. 3.
WM-700S, 700P — SPECIFICATIONS WM-700S SPECIFICATIONS MODEL U.S.(inch) METRIC CAPACITY .................................................... 7 CUBIC FEET ....................................................... 198 LITERS BAG CAPACITY ............................................. 1½ - 2½ ............................................................ 1½ - 2½ WEIGHT (appROX.) ....................................... 788 LBS. ............................................................. 357 KG. L X W X H ..........
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
WM-700S, 700P — SUGGESTED SPARE PARTS WM-700S/P WM-700S/P 1 to 3 Units 5+ Units Qty. P/N Description 3 ......... EM505834 ........... V-BELT 3 ......... EM507846 ........... V-BELT, WM-700 ELECTRIC MOTOR 6 ......... 491010 ................ LATCH ASSY 3 ......... EM203010 ........... BLADE KIT STEEL DRUM 3 ......... EM204624 ........... BLADE KIT POLY DRUM 2 ......... EM902153 ........... BEARING, DRUM HEAD 2 ......... 3131 .................... O-RING, DRUM HEAD 2 ......... 3530 ....................
WM-700S, 700P — DRUM HEAD AND PADDLE SHAFT ASSY DRUM HEAD TOW END 27 26 25 28 PADDLE SHAFT ASSEMBLY PAGE 14 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
WM-700S, 700P — DRUM HEAD AND PADDLE SHAFT ASSY DRUM HEAD & PADDLE SHAFT ASSEMBLY DRUM HEAD NO. PART NO. PART NAME 2 EM200297 EM968011 EM200292 3249 EM902153 EM507720 500076 EM916019 5028 B 8164 3047 3131 13002 507719 3291 U-BOLT 2 NUT HEX ½-13 4 U-BOLT INSERT 4 DUST CAP ............................................................................... 1 ................. REPLACES 50017 BEARING 2 BRACKET, DUMP BEARING ................................................... 2 .................
WM-700S — STEEL DRUM STEEL DRUM 109 110 111 108 PAGE 16 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
WM-700S — STEEL DRUM WM-700S - STEEL DRUM NO. PART NO. 100 101 101 101 102 103 104 105 106+ EM201537 ELC1 EPC1 EBC1 EM963580 EM969038 EM203333 EM507271 508097 508098 * * * 108 109 110 111 ❑ ❑ ❑ PART NAME QTY. REMARKS DUMP HANDLE 1 TOWING TONGUE (P. EYE) .................................... 1 .............. NO LONGER AVAILABLE TOWING TONGUE (PIN HOLE) .............................. 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM TOWING TONGUE (BALL HITCH) .......................... 1 ......
WM-700P — POLYETHYLENE DRUM POLYETHYLENE DRUM 121 122 123 124 125 116 126 123 124 PAGE 18 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
WM-700P — POLYETHYLENE DRUM POLYETHYLENE DRUM MODEL WM-700P NO. PART NO. PART NAME 115 116 117 118 119 120 13000 507495 504534 504535 507493 500083 508022 PLASTIC DRUM (W/O GRATES) ............................................. 1 ...................... REPLACES 504522 SUPPORT DRUM 1 STATIONARY GRATE 1 MOVEABLE GRATE 1 GRATE OPEN BAR 1 DUMP HANDLE 1 DRUM & SHAFT ASSY (COMPLETE) (POLY) ........................ 1 ......................
WM-700S, 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY CAB ASSEMBLY PAGE 20 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
WM-700S, 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY GAS ENGINES, PULLEYS & CAB ASSEMBLY COMMON PARTS NO. PART NO. PART NAME QTY. 150 151 152 153 154 155 156 157 158 159 167 168 169 170 171 507158 491010 502228 EM959080 EM102014 EM901515 EM905016 EM203098 3351 EM940734 502226 JISB2804C25 500214 EM963064 1141 CAB ASSEMBLY LATCH ASSEMBLY ..................................... DRIVE GEAR 16-1/2 DIA. ROD END SPRING IDLER PULLEY PILLOW BLOCK BEARING SPRING CLIP DRIVEN PINION GEAR ...........................
WM-700S, 700P — ELECTRIC MOTOR & PULLEYS CAB ASSEMBLY PAGE 22 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
WM-700S, 700P — ELECTRIC MOTOR & PULLEYS ELECTRIC MOTOR & PULLEYS NO. PART NO. PART NAME 161 162 163 164 165 166 P145K17DB45A EM505204 502213 EM507846 EM507490 EM507713 507715 ELECTRIC MOTOR 1.5 H.P .............................................................. 1 ................. REPLACES 939275 & 3197 DRIVEN PULLEY 1 DRIVE PULLEY ................................................................................. 1 ................. REPLACES 901019 V-BELT 2 THREADED ROD 1 IDLER ARM 1 GUIDE, V-BELT ....
WM-700S, 700P — AXLE & WHEEL GROUP PAGE 24 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
WM-700S, 700P — AXLE & WHEEL GROUP AXLE & WHEEL GROUP NO. PART NO. PART NAME 200 200 201 # 202 203 204 204 205 206 207 208 209 # 210 # 211 211# 212 # 213 213 EM507407 511334 EM914288 EM501299 EM511159 3068 8164 0183 3005 3469 EM942000 3469 8115 EM903049 EM903113 EM903012 3504 EM941306 AXLE ................................................... 1 .................. UP TO S/N HL60000 AXLE ................................................... 1 .................. STARTING S/N JA00000 SEAL 2 THICK SPACER ......
TERMS AND CONDITIONS OF SALE — PARTS Effective: July 1, 2000 PAYMENT TERMS 4. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. Freight is at the sender’s expense.
NOTE PAGE WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV.
PARTS AND OPERATION MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 ^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 MULTIQUIP INC.
