© COPYRIGHT 2004, MULTIQUIP INC. OPERATION AND PARTS MANUAL MULTIQUIP MODEL QP-301TH GASOLINE POWERED TRASH PUMP Revision #4 (10/05/05) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT 800-421-1244 FAX: 310- 537-4259 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310- 631-5032 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 QP-301TH TRASH PUMP — PARTS MANUAL— REV.
QP-301TH — TABLE OF CONTENTS QP-301TH Gasoline Powered Trash Pump Honda GX240K1PA2 Engine Air Cleaner (Dual) Assembly .............................. 34-35 Camshaft Assembly ........................................... 36-37 Carburetor Assembly ......................................... 38-39 Control Assembly ............................................... 40-41 Crankcase Cover Assembly ............................... 42-43 Crankshaft/Balancer Assembly ..........................
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Ground orders are treated as “Standard Orders”, and will ✓ FedEx or UPS Second Day or Third Day ship within 24 hou
QP-202TH — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model QP-301TH Trash Pump.
QP-202TH — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position when the pump is not in use. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection. Other important messages are provided throughout this manual to help prevent damage to your pump, other property, or the surrounding environment.
RULES FOR SAFE OPERATION DANGER: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the trash pump: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual. ■ This equipment should not be operated by persons under 18 years of age.
RULES FOR SAFE OPERATION ■ NEVER Run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using pump. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
QP-301TH — SPECIFICATIONS/DIMENSIONS (PUMP) Table 1. Specifications (Pump) Model QP-301TH Type Trash Pump Suction & Discharge Size Pump Maximum Pumping Capacity Max. Solids Diameter Dimension (L x W x H) Dry Net Weight 3.00 in. (76 mm.) 416 gallons/minute (1,575 liters/minute) 1.50 in. (38 mm.) Max. Lift 25 ft. (7.62 meters) Max. Head 90 ft. (27.43 meters) 25.5 x 18.0 X 25.5 in. (65 X 45 X 65 cm.) 150 lbs. (68 Kg.) Figure 1.
QP-301TH — SPECIFICATIONS/DIMENSIONS (ENGINE) Table 2. Specifications (Engine) Model HONDA GX240K1PA2 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Bore X Stroke 2.90 in. x 2.30 in. (73 mm x 58 mm) Displacement 1 4 .8 1 cc. Max Output 8.0 H.P./3600 R.P.M. Engine Fuel Tank Capacity Approx. 1.59 U.S. gallons (6.0 liters) Fuel Unleaded Automobile Gasoline Lube Oil Capacity 1.165 qts. (1.
QP-301TH — GENERAL INFORMATION APPLICATION The QP-301TH Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on the QP-301TH trash pump use a 3-inch diameter opening, which allows the pump to pump at a rate of approximately 416 gallons/ minute (gpm) or 1,575 liters/minute (lpm). Centrifugal or self priming pumps are designed to purge air from the suction line and create a partial vacuum in the pump body.
QP-301TH — PUMP COMPONENTS Figure 2 shows a typical application using the QP-301TH Centrifugal Trash pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1.5 inch (38 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris. Figure 2. QP-301TH Pump Application 1.
QP-301TH — BASIC ENGINE Figure 3. Engine Controls and Components INITIAL SERVICING 6. The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 7.
QP-301TH — PRE-INSPECTION (ENGINE) CAUTION NEVER operate the pump in a confined area or enclosed area structure that does not provide ample free flow of air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 5), fill to the edge of the oil filler hole with the recommended oil type (Table 5). Maximum oil capacity is 1.16 quarts (1.
QP-301TH — PRE-SETUP (PUMP) Before Starting 1. Read safety instructions at the beginning of manual. Suction and discharge hoses are available from Multiquip. Contact your nearest dealer for more information. NOTE 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (Figure 2) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. 5.
QP-301TH — INITIAL START-UP (ENGINE) CAUTION : 3. Place the choke lever (Figure 8) in the "OPEN " position if starting a cold engine. DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the trash pump. It is extremely important that this section be read carefully before attempting to use the pump in the field.
QP-301TH — INITIAL START-UP (ENGINE) 6. Grasp the starter grip (Figure 11) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting. CAUTION : ALWAYS run engine at full speed while pumping. Stopping The Engine Normal Shutdown 1. Move the throttle lever to the IDLE position (Figure 14) and run the engine for three minutes at low speed. Figure 11. Starter Grip 7.
NOTE PAGE QP-301TH TRASH PUMP — PARTS MANUAL— REV.
QP-301TH — MAINTENANCE (PUMP) Pump Vacuum Test Adjusting Impeller Clearance CAUTION : 1. If it is necessary to replace impeller or volute, be sure clearance between impeller and volute is adjusted correctly. 2. The impeller should be as close to the volute as possible without rubbing against it. Clearance is adjusted by adding or removing shims from behind the impeller. DO NOT attempt to start the engine unless the pump has previously been primed with water.
QP-301TH — MAINTENANCE (PUMP) NOTE Pressure reading may vary depending on altitude. See Tables 3 and 4 on page 12. Figure 17. Pump Vacuum Tester QP-301TH TRASH PUMP — PARTS MANUAL— REV.
QP-301TH — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 6 below: Table 6. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
QP-301TH — MAINTENANCE (ENGINE) Maintenance DANGER : Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank. ■ Remove or clean the filter at the bottom of the tank.
QP-301TH — PREPARATION FOR LONG -TERM STORAGE Pump Storage For storage of the pump for over 30 days, the following is required: z Drain the fuel tank completely. z Run the engine until the fuel in the injection system is completely consumed. z Completely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedures described in the engine manual for engine storage. z Remove the drain plug from the pump and drain out any water from left in the housing.
NOTE PAGE QP-301TH TRASH PUMP — PARTS MANUAL— REV.
QP-301TH — TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Fuel is available and spark plug ignites (compression low ). Ignition plug being bridge? Check ignition system.
QP-301TH — TROUBLESHOOTING (ENGINE/PUMP) TABLE 7. ENGINE TROUBLESHOOTING (Continued) SYMPTOM POSSIBLE PROBLEM SOLUTION Operation not satisfactory Rotational speed fluctuates. Recoil star ter not working properly. Governor adjustment improper? Adjust governor to correct lever. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Dust in rotating par t? Clean recoil star ter assembly.
QP-301TH — EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. NOTE The contents of this catalog are subject to change without notice. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
QP-301TH — SUGGESTED SPARE PARTS QP-301TH TRASH PUMP1 TO 3 UNITS W/HONDA GX240K1PA2 ENGINE Qty. P/N Description 2 ............ KIT301T ................ KIT, MECHANICAL SEAL, O-RINGS 1 ............ 1343040030 .......... IMPELLER 1 ............ 0811883056 .......... MECHANICAL SEAL SLEEVE 1 ............ 0481310250 .......... O-RING, MECHANICAL SLEEVE 2 ............ 0631211100 .......... FLOODING CAP 2 ............ 0480350300 .......... O-RING, FLOOD CAP 3 ............ 9807956846 .......... SPARK PLUG 3 ......
QP-301TH — PUMP ASSY. PUMP ASSY. PAGE 30 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
QP-301TH — PUMP ASSY. PUMP ASSY. NO. PART NO.
QP-301TH — PUMP ASSY. PUMP ASSY. PAGE 32 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
QP-301TH — PUMP ASSY. PUMP ASSY. NO. PART NO. 36 0131151030 37 0105051050 38 0105051045 39 0105050820 40 0401450100 41 0458220080 42 0401450050 43 0451250100 44 0451250080 45 0205450100 46 0742304080 47 0191160625 48 0451250100 49 1317390610 50 7005000 51 KIT301T PART NAME QTY.
HONDA GX240K1PA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 34 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 5 6 8+ 9+ 10 13 14 15 PART NO. 16281ZE2000 17210ZE2505 17218ZE2505 17231ZH9820 17232891000 17238ZE2310 17239ZE1000 17410ZE2020 90325044000 90009ZE2003 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER (DUAL) ............. 1 ........... INCLUDES ITEMS W/ * FILTER, OUTER 1 COVER, AIR CLEANER 1 GROMMET, AIR CLEANER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW, AIR CLEANER ............................. 1 ..
HONDA GX240K1PA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 36 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 PART NO. 14100ZE2306 1 14100ZE2W01 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY ............................ 1 ........... INCLUDES ITEM W/ USE UP TO * ................................................................... 1 ...........
HONDA GX240K1PA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 38 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 +■ * 2 * 3 * 4 * 4 PART NO.
HONDA GX240K1PA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 40 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 1 3 4 5 6 10 * 11 * 12 * 14 * 15 * 16 * 19 20 21 * 24 * 27 PART NO. 16551ZE2000 16555ZE2000 16561ZE2000 16562ZE2000 16570ZE2W00 16571ZE2W00 16574ZE1000 16575ZE2W00 16578ZE1000 16581ZE2W00 16584883300 90013883000 90015ZE5010 90114SA0000 93500050280A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSY. ................................................ 1 ...........
HONDA GX240K1PA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 42 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 2 3 3 4 5 8# 9$ 10 11 + * 12 + * 13 + * 14 * 15 * 16 * 17 18 * 19 * 20 21 * 22 * PART NO. 11400ZE2601 11381ZE2800 11381ZE2801 15600ZG4003 15600735003 15625ZE1003 15625ZE1003 16510ZE2811 16511ZE2000 16511ZE2811 16513ZE2000 16531ZE2000 90473147000 90602ZE1000 90701HC4000 91201890003 9410106800 957010803500 961006202000 961006206000 PART NAME QTY. REMARKS COVER ASSY, CRANKCASE ..................... 1 ...........
HONDA GX240K1PA2 ENGINE — CRANKSHAFT/BALANCER ASSY. CRANKSHAFT /BALANCER WEIGHT ASSY. PAGE 44 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CRANKSHAFT/BALANCER ASSY. CRANKSHAFT /BALANCER WEIGHT ASSY. NO. 2 8 12 * PART NO. 13320ZE2651 13351ZE2010 961006206000 PART NAME QTY. REMARKS CRANKSHAFT, P- TYPE ...................................... 1 ........... INCLUDES ITEMS W/ * WEIGHT, BALANCER 1 BEARING, RADIAL BALL 6206 1 QP-301TH TRASH PUMP — PARTS MANUAL— REV.
HONDA GX240K1PA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 46 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 3 6 7 8 9 10 11 12 13 14 * 15 16 PART NO. 12000ZE2834 15510ZE2043 16541ZE2010 90131896650 90446KE1000 91201890003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 90013883000 34150ZH7003 PART NAME QTY. REMARKS CYL. ASSY., BAL. + OIL ALERT ..... 1 ........... INCLUDES ITEMS W/ * SWITCH ASSY., OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG2 2 WASHER 1 OIL SEAL 1 O- RING 13.5X1.
HONDA GX240K1PA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 48 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 12 13 14 15 16 17 17 PART NO. 12200ZH9000 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE2800 12310ZE2020 12391ZE2020 14775ZE2010 90014ZE2000 90042ZE2000 90047ZE2000 92900080320E 90441ZE2010 9430112200 950051100130M 957011008000 9807955846 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD ......................................... 1 ......... INCLUDES ITEMS W/ * GUIDE, VALVE OS (OPTIONAL) 1 GUIDE, EX.
HONDA GX240K1PA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 50 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 2 3 4 5 5 7 9 PART NO. 16731ZE2003 19610ZE2010ZA 19610ZE2010ZC 19631ZE2D00 32197ZH8003 36100ZE1015 36100ZH7003 90013883000 90684ZA0601 PART NAME QTY. REMARKS CLIP, TUBE 1 COVER, FAN *R8* BRIGHT RED 1 COVER, FAN *NH1* BLACK 1 SHROUD 1 SUB- HARNESS 1 SWITCH ASSY., ENGINE STOP ................ 1 ........... USE UP TO ENGINE S/N 3566259 SWITCH ASSY., ENGINE STOP ................ 1 ...........
HONDA GX240K1PA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 52 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 7 7 8 PART NO. 19511ZE2000 28450ZE2W11 31100ZE2010 90201ZE3V00 90201ZE3790 90741ZE2000 PART NAME QTY. REMARKS FAN, COOLING 1 PULLEY, STARTER (SCREEN GRID) 1 FLYWHEEL 1 NUT, SPECIAL 16MM ................................. 1 ........... USE FROM ENGINE S/N 3467139 NUT, SPECIAL 16MM ................................. 1 ........... USE UP TO ENGINE S/N 3467138 KEY, SPECIAL WOODRUFF 25X18 1 QP-301TH TRASH PUMP — PARTS MANUAL— REV.
HONDA GX240K1PA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 54 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 8 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE2010ZD 17620ZH7023 17631ZH7003 17672ZE2W01 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER, SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* BLACK 1 CAP, FUEL FILLER .......................................1 ......... INCLUDES ITEMS W/ * GASKET, FUEL FILLER CAP 1 FILTER, FUEL ...............................................1 ......
HONDA GX240K1PA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 56 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 6 8 11 PART NO. 30500ZE2023 30700ZE1013 31512ZE2000 36101ZE1010 90015883000 PART NAME COIL ASSEMBLY, IGNITION CAP ASSEMBLY, NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH 370MM BOLT, FLANGE 6X28 QTY. 1 1 1 1 2 REMARKS QP-301TH TRASH PUMP — PARTS MANUAL— REV.
HONDA GX240K1PA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 58 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 6 8 9 10 11 12 13 14 PART NO. 18310ZE2W00 18320ZE2W00 18323ZE2810 18330ZE2W00 18331ZE2810 18333ZE3800 18333ZK6Y00 18381ZE2W10 18381ZE2800 90013883000 90050ZE1000 90055ZE1000 90050ZE1000 9405008000 PART NAME QTY.
HONDA GX240K1PA2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 60 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZE2013 13011ZE2013 13012ZE2013 13013ZE2013 13101ZE2W00 13102ZE2W00 13103ZE2W00 13104ZE2W00 13111ZE2000 13200ZE2000 13200ZE2305 90001ZE8000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON (STANDARD) 1 RING SET, PISTON OS0.25 1 RING SET, PISTON OS.50 1 RING SET, PISTON 0.75 1 PISTON (STANDARD) 1 PISTON OS0.25 1 PISTON OS0.50 1 PISTON 0.75 1 PIN, PISTON 1 ROD ASSEMBLY, CONNECTING (STANDARD) ... 1 ...........
HONDA GX240K1PA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 62 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 12 13 14 PART NO. 28400ZE2W01ZB 28410ZE2W01ZB 28421ZE2W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZE2W11 28469ZE2W01 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY, RECOIL *NH1* BLK ..... 1 .........
NOTE PAGE PAGE 64 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 PART NO. 11381ZE2801 12251ZE2800 12391ZE2020 16221ZA0800 16223ZA0800 18333ZE3800 06111ZE2408 PART NAME QTY. REMARKS GASKET, CASE COVER 1 GASKET, CYLINDER HEAD 1 GASKET, CYL. HEAD COVER 1 GASKET, CARBURETOR 1 GASKET, INSULATOR 1 GASKET, EXHAUST PIPE 1 GASKET KIT ................................................ 1 ......... INCLUDES ITEMS W/ QP-301TH TRASH PUMP — PARTS MANUAL— REV.
HONDA GX240K1PA2 ENGINE — LABELS ASSY. L ABELS ASSY. PAGE 66 — QP-301TH TRASH PUMP — PARTS MANUAL — REV.
HONDA GX240K1PA2 ENGINE — LABELS ASSY. L ABELS ASSY. NO. 1 2 3 5 15 16 PART NO. 87521ZE2W01 87522ZE1810 87522ZH9000 87528ZE2810 87586ZH7W00 87532ZH8810 PART NAME EMBLEM (INTERNAL) MARK, CAUTION (EXTERNAL) LABEL, CAUTION MARK, CHOKE (EXTERNAL) LABEL, FUEL CAUTION MARK, OIL ALERT (E) QTY. 1 1 1 1 1 1 REMARKS QP-301TH TRASH PUMP — PARTS MANUAL— REV.
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE QP-301TH TRASH PUMP — PARTS MANUAL— REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT 800-421-1244 FAX: 310- 537-4259 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310- 631-5032 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 800-421-1244 FAX: 310-537-3927 E-MAIL: mq@multiquip.com WWW: multiquip.
