Portable Generator User Manual

PAGE 40 — DCA-220SSJ/SSJU— OPERATION AND PARTS MANUAL — REV. #1 (01/06/09)
Output Terminal Familiarization
The “
Output Terminal Panel
(Figure 8) is provided with the
following:
Three (3) 100/200V output receptacles @ 50 amp
Three (3) Circuit Breakers @ 50 amps
Two (2) 100V GFCI receptacles @ 20 amp
Two (2) GFCI Circuit Breakers @ 20 amps
Five (5) Output Terminal Lugs ( U, V, W, O, Ground)
Output Terminal Panel
The
Output Terminal Panel
(Figure 9) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
NOTE
Terminal legs O and “Ground
are considered
bonded grounds
.
Figure 9. Output Terminal Panel
DCA-220SSJ/SSJU — OUTPUT TERMINAL PANEL FAMILIARIZATION
AUX. POWER RECEPTACLES
100/200V, 50 AMPS
100 VAC, 20 AMP
GFCI RECEPTACLES
Y
X
W
CS-6369
TWIST-LOCK
CIRCUIT BREAKERS
FOR GFCI RECEPTACLES
RECEPTACLE
AND
CIRCUIT BREAKER
PANEL
M
Q
P
O
W
E
R
ACCESS DOOR
LIFT TO OPEN
HARD WIRE
HOOKUP PANEL
O
U
V
W
BLACK RED BLUE WHITE GREEN
AND 3Ø,
480 -120 VAC
OUTPUT TERMINALS
NEUTRAL
TERMINAL
GROUND
TERMINAL
CIRCUIT BREAKERS
FOR CS-6369 TWIST
LOCK RECEPTACLES