© COPYRIGHT 2003, MULTIQUIP INC. OPERATION AND PARTS MANUAL Vibratory Walk-Behind Roller Model MDR-9GH (Honda Gasoline) Revision #0 (12/17/03) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MAYCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPA
TABLE OF CONTENTS MIKASA MDR-9GHVIBRATORY ROLLER HONDA GX340K1QAE2 ENGINE Proposition 65 Warning ............................................. 2 Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Specifications ............................................................ 6 Dimensions ...............................................................
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Ground orders are treated as “Standard Orders”, and will ✓ FedEx or UPS Second Day or Third Day ship within 24 hou
MDR-9GH —SPECIFICATIONS Table 1. MDR-9GH VIBRATORY ROLLER SPECIFICATIONS Centrifugal Force 6,600 lbs. (3,000 kg) Vibration Frequency 3,000 vpm Traveling Speed (forward and reverse) 0 to 1.8 mph (0 to 3 km/hr) Grade Ability 25° Diameter x Width of Roller 18 x 27.6 in (457 x 700 cm) Wheel Base 22.4 in (570 mm) Side Road Clearance 10.8 in (274 mm) Length (with Handle) 111.8 in (2,840 mm) Width 31.3 in (795 mm ) Height 44.1 in (1,120 mm ) Total Weight 1,940 lbs.
MDR-9GH — DIMENSIONS Figure 2. MDR-9GH Vibratory Roller Dimensions TABLE 3. ROLLER DIMENSIONS REF. DIMENSIONS REF. DIMENSIONS A 111.8 in. (2.8 meters) F 22.4 in. (.57 meters) B 88 in. (2.23 meters) G 18 in. (.457 meters) C 46 in. (1.17 meters) H 15.5 in. (.382 meters) D 45.9 in. (1.16 meters) I 5.4 in. (.137 meters) E 11 in. (.279 meters) MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model MDR-9GH Vibration Roller.
MDR-9GH — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the vibration roller is not in use. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection. Other important messages are provided throughout this manual to help prevent damage to your vibration roller, other property, or the surrounding environment.
MDR-9GH — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the MIKASA MDR-9GH Vibratory Roller. GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MDR-9GH — RULES FOR SAFE OPERATION ■ NEVER disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties. Loading and Unloading (Crane) ■ Before lifting, make sure that machine parts (hook and vibration insulator) are not damaged and screws are not loosened or lost.
MDR-9GH — OPERATION AND SAFETY DECALS Figure 1 displays the operation and safety decals as they appear on the vibratory roller. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set. Figure 1. Operation and Safety Decals PAGE 12 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
NOTE PAGE MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — GENERAL INFORMATION The Mikasa Model MDR-9GH is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. With 28-inch drums and 32 inches overall width, virtually any asphalt or mixed granular soil compaction job is quickly cut down to size. The impact force of the MDR-9GH levels and uniformly compacts voids between soil particles to increase dry density. Features include: Hydraulic variable speed transmission assures easy handling.
MDR-9GH — GENERAL INFORMATION CAUTION : Tipping (Rollovers) NEVER! stand under, or get onto the roller while it is being lifted or moved. NEVER! operate the roller on side slopes (Figure 5). The possibility exist that the roller could tip over (roll over), thus causing bodily harm even death and serious damage to the equipment. CAUTION : ONLY! use steel ropes or chains that are capable of lifting at least 1,940 lbs. (880 kg ). CAUTION : NEVER! use any other part of the roller for lifting purposes.
MDR-9GH — VIBRATORY ROLLER COMPONENTS Figure 6. MDR-9GH Vibratory Roller Components Figure 6 illustrates the location of the major components for the MDR-9GH Vibratory Roller. The function of each component is described below: 7. Engine – This vibratory roller uses a HONDA GX340KQAE2 gasoline engine. Refer to the owner’s manual for engine information and related topics. 1. Handle Bar – When operating the roller, this handle is to be in the downward position.
MDR-9GH — ENGINE COMPONENTS Figure 7. HONDA GX340KQAE2 Engine Components INITIAL SERVICING 6. The engine (Figure 7) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions.
MDR-9GH — INSPECTION CAUTION : 3. Never operate the vibratory roller in a confined area or enclosed structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the vibratory roller. BEFORE STARTING 1. Read safety instructions at the beginning of manual. 2. Familiarize yourself with the operating and control elements of the machine and the working environment.
MDR-9GH — INSPECTION CHECKING HYDRAULIC SYSTEM CHECKING THE CLUTCH BOX OIL LEVEL 1. 1. Check clutch box for any oil leakage. 2. Remove the level plug and check oil level (Figure 12). 3. Add oil if necessary. Check the oil tank level gauge (Figure 10). Oil level should be at the middle indication of the gauge or higher. Fill as required 2. Check the surroundings of the oil tank, hydraulic pump and motor for oil leakage. Figure 12. Clutch Box Oil Level Check Figure 10.
MDR-9GH — INSPECTION/START-UP CHECKING WATER TANK POSITIONING THE HANDLE BAR 1. 1. Release the handle bar release pin (Figure 15) and position the handle bar to the lowered position before starting operation. 2. When machine is not in use, release the handle bar release pin and position the handle bar to the upright position. Check the water tank to see if filled. Add water if necessary. The water tank has a capacity of approximately 6 gallons (23 liters) (Figure 14). Figure 14.
MDR-9GH — START-UP 2. Place the Engine ON/OFF switch (Figure 17) in the "ON" position. 4. Rotate the throttle lever (Figure 19) halfway between fast and slow for starting. The engine governor speed is factory set to ensure optimum operating speeds. Figure 17. Engine ON/OFF Switch Figure 19. Throttle Lever The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine.
MDR-9GH — OPERATION TRAVELING VIBRATING CAUTION : 1. Make sure to follow all safety rules referenced in the safety section of this manual before operating roller. Keep work area clear of debris and other objects that could cause damage to the roller or bodily injury. Shift the two vibrator levers (Figures 22 and 23) to the vibrate position to start vibrations. 1. To make the roller move in the forward direction push the travel lever ( Figure 21) forward.
MDR-9GH — OPERATION/LIFTING/TRANSPORTING STOPPING LIFTING 1. Place the vibrator and travel levers to the neutral position. 1. 2. Slow down the engine and allow to cool for at least 2 minutes. In an electric start, return the key switch to the STOP position as soon as the engine stops. Use a crane or lift to load and unload the machine. A skilled crane operator is required to perform the job. 2. When lifting the machine, check for any damaged or loose bolts, lifting hooks, and shock mounts. 3.
MDR-9GH — MAINTENANCE CAUTION: CAUTION: Fuel piping and connections should be replaced every 2 years. Inspection and other services should always be carried out on hard and level ground with the engine shutdown. INSPECTION AND MAINTENANCE SERVICE TABLES 1. To make sure your plate vibratory roller is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 4 through 6. TABLE 5. MDR-9GH MACHINE INSPECTION HOURS OF OPERATION ITEM REMARKS TABLE 6.
MDR-9GH — MAINTENANCE SPARK PLUG AIR FILTER 1. Remove and clean the spark plug (Figure 26). 1. Remove the air cleaner cover and foam filter element as shown in Figure 28. 2. Adjust the spark gap to 0.028 ~0.031 inch (0.6~0.7 mm). This unit has electronic ignition, which requires no adjustments. 2. Tap the paper filter element (Figure 28) several times on a hard surface to remove dirt, or blow compressed air [not exceeding 30 psi (207 kPa, 2.
MDR-9GH — MAINTENANCE CHECKING THE CHAINS 1. Take off the checking cover on roller and coat grease on the chain if necessary (Figure 29). The chain should be lightly lubricated with motor oil. CAUTION: NEVER attempt to check the V-belt with the engine running. Severe injury can occur if your hand gets caught between the V-belt and the clutch (Figure 31). Always use safety gloves. CLUTCH PULLEY VIBRATOR PULLEY Figure 29. Chain Cover 2.
MDR-9GH — MAINTENANCE HYDRAULIC OIL CHECK HYDRAULIC OIL FILTER CHECK 1. Check for any oil leakage from the hoses and joints daily. 1. The hydraulic oil filter should be replaced after first 25 hours of operation. 2. Check hydraulic oil level every 4 to 5 hours after starting operation. 2. After first replacement, it should be replaced after 250 hours operation (2 months), every 500 hours of operation 3.
MDR-9GH — MAINTENANCE HDRAULIC AIR EXTRACTION 1. After filling hydraulic oil tank with oil, loosen the oil hose joint and check that oil is enough to reach the oil suction and outlet ports in the hydraulic transmission. Tighten the hose joint securely after checking. 2. Loosen the charge relief valve located on the front side of the hydraulic transmission (Figure 35). Figure 36. Unscrewing Right Lock Nut Figure 35. Loosening Charge Relief Valve 3. Check that oil flows out from the valve hole. 4.
MDR-9GH — MAINTENANCE If the neutral position of the travel lever and the neutral point of z DO NOT close the exhaust outlet of battery. The gas pressure transmission do not match after adjustment is repeated, align as building up in the battery may cause explosion. follows: z Before using a battery charger, read and understand the charger instruction manual thoroughly. 1.
MDR-9GH — ENGINE TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 8) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
MDR-9GH — ENGINE TROUBLESHOOTING TABLE 8. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM "Weak in power" compression is proper and does not misfire. POSSIBLE CAUSE SOLUTION Air cleaner not clean? Clean or replace air cleaner Improper level in carburetor? Check float adjustment, re-build carbureator. Defective Spark plug? Clean or replace spark plug. Defective Spark plug? "Weak in power" compression is proper but misfires. Engine overheats. Rotational speed fluctuates. Recoil starter malfunction.
MDR-9GH — ROLLER TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Roller Troubleshooting (Table 9) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 9.
NOTE PAGE MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. NOTE Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. If more than one of the same reference number is listed, the last one listed indicates newest (or latest) part available.
SUGGESTED SPARE PARTS MQ MIKASA MDR-9GH VIBRATORY WALK-BEHIND ROLLER W/HONDA GX340QAE2 GASOLINE ENGINE 1 to 3 Units Qty. P/N 1 .......... 0750800671 ......... 3 .......... 501010440 ........... 6 .......... 070100360 ........... 2 .......... 502303040 ........... 6 .......... 17210ZE3505 ....... 3 .......... 35111880003 ....... 6 .......... 9807956846 ......... 1 .......... 28462ZV7003 .......
MDR-9GH — DECAL PLACEMENT DECAL PLACEMENT PAGE 36 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — DECAL PLACEMENT DECAL PLACEMENT NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 920200591 920200630 920201590 920101510 920203290 920200450 920101290 920201100 920200320 920200440 920200470 920101480 920101280 920101200 PART NAME PLATE, CAUTION PLATE, SERIAL NO. DECAL, MQ MARK 98X70 DECAL, MIKASA MARK 440MM DECAL, CAUTION DECAL, OIL FILTER DECAL, VIBRATION DECAL, CLUTCH LEVER DECAL, WATER TANK DECAL, PROHIBIT TOW DECAL, OIL TANK DECAL, OIL LEVEL DECAL, FORWARD & REVERSE DECAL, GREASE QTY.
MDR-9GH — BODY ASSY. BODY ASSY. PAGE 38 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — BODY ASSY. BODY ASSY. NO. 1 2 3 4 5 6 8 9 10 42 43 44 45 46 48 49 51 52 53 54 55 56 57 58 59 60 68 69 82 83 PART NO.
MDR-9GH — FRONT COVER ASSY. FRONT COVER ASSY. PAGE 40 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — FRONT COVER ASSY. FRONT COVER ASSY. NO. 13 14 16 17 18 20 21 22 23 24 25 26 27 28 31 32 33 34 35 36 37 38 39 PART NO. 031110160 502103800 001220820 030208200 952401560 502302490 001220815 030208200 031108160 502302500 001221020 030210250 021110160 001220825 502215470 001221020 030210250 031110160 001221015 030210250 031110160 502010650 407310670 PART NAME FLAT WASHER M10 FRONT COVER BOLT 8X20 T LOCK WASHER M8 WASHER 8.
MDR-9GH — FRONT COVER ASSY. (CONTINUED) FRONT COVER ASSY. PAGE 42 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — FRONT COVER ASSY. (CONTINUED) FRONT COVER ASSY. NO. 41 65 66 81 82 83 88 89 90 91 92 93 94 95 96 97 98 100 101 102 103 104 105 106 107 108 109 110 PART NO.
MDR-9GH — AXLE ASSY. AXLE ASSY. PAGE 44 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — AXLE ASSY. AXLE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17 18 19 20 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 PART NO.
MDR-9GH — AXLE ASSY. (CONTINUED) AXLE ASSY. PAGE 46 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — AXLE ASSY. (CONTINUED) AXLE ASSY. NO. 40 41 42 43 44 45 46 47 48 49 50 51 52 54 55 61 PART NO.
MDR-9GH — TRANSMISSION ASSY. TRANSMISSION ASSY. PAGE 48 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — TRANSMISSION ASSY. TRANSMISSION ASSY. NO. 1 2 3 4 5 6 7 8 9 11 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 37 38 39 40 41 63 64 PART NO.
MDR-9GH — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. PAGE 50 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. NO. 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 104 PART NO. 050200160 501010720 501010590 501010600 502302850 502302840 502201000 502010640 502010650 953405270 953405260 953405840 953400020 001221035 030210250 031110160 959010110 952401960 920200470 PART NAME O-RING P-16 JOINT 3/4-16 JOINT 3/8 JOINT 1/4 OIL HOSE 3/8 320L OIL HOSE 1/4 320L OIL TANK ELBOW 90 DEG. 3/8 ELBOW 90 DEG.
MDR-9GH — CLUTCH BOX ASSY. CLUTCH BOX ASSY. PAGE 52 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — CLUTCH BOX ASSY. CLUTCH BOX ASSY. NO. PART NO.
MDR-9GH — CLUTCH BOX ASSY. (CONTINUED) CLUTCH BOX ASSY. PAGE 54 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — CLUTCH BOX ASSY. (CONTINUED) CLUTCH BOX ASSY. NO. 35 * 36 * 37 * 38 * 39 * 40 * 42 * 43# 44# 45# 46# 47# 48# 49# 50# 51# 52# 53# 55 PART NO. 953405260 502302650 959402980 001521025 501010950 502302660 501402260 501402400 501302160 042006204 952400930 080100470 952400130 001200820 030208200 001221035 030210250 031110160 501910040 PART NAME QTY.
MDR-9GH — VIBRATION CASE ASSY. VIBRATION CASE ASSY. PAGE 56 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — VIBRATION CASE ASSY. VIBRATION CASE ASSY. NO. PART NO.
MDR-9GH — UPPER CONTROL HANDLE ASSY. UPPER CONTROL HANDLE ASSY. PAGE 58 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — UPPER CONTROL HANDLE ASSY. UPPER CONTROL HANDLE ASSY. NO. 1 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 34 39 40 41 42 43 44 48 49 50 51 52 53 60 PART NO.
MDR-9GH — UPPER CONTROL HANDLE ASSY. (CONTINUED) UPPER CONTROL HANDLE ASSY. PAGE 60 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — UPPER CONTROL HANDLE ASSY. (CONTINUED) UPPER CONTROL HANDLE ASSY. NO. 61 62 63 93 94 95 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 PART NO.
MDR-9GH — LOWER CONTROL HANDLE ASSY. LOWER CONTROL HANDLE ASSY. PAGE 62 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — LOWER CONTROL HANDLE ASSY. LOWER CONTROL HANDLE NO. PART NO.
MDR-9GH — ENGINE ASSY. ENGINE ASSY. PAGE 64 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — ENGINE ASSY. ENGINE ASSY. NO. PART NO. 68 912234007 69 502403290 72 031110160 75 020310080 76 030210250 77 001221230 78 030212300 79 952400600 80 502454370 81 070200580 82 099208012 105 502339880 PART NAME ENGINE, HONDA GX340K1QAE2 KEY 32 X6 32X48 WASHER, FLAT NUT M10 WASHER, LOCK BOLT 12X30 T WASHER, LOCK WASHER, FLAT 13X28X4.5 PULLEY, ENGINE V-BELT B-58 SOCKET HEAD SCREW 8X12 T ENGINE MOUNTING PLATE QTY.
MDR-9GH — BATTERY ASSY. BATTERY ASSY. PAGE 66 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
MDR-9GH — BATTERY ASSY. BATTERY ASSY. NO. PART NO. 70 502215490 71 001200815 72 030208200 73 502403310 74 502403320 75 020308060 76 030208200 77 031108160 78 607010030 79 502301040 80 502301050 PART NAME BATTERY BASE (GX340) BOLT 8X15 WASHER, LOCK M8 BATTERY PROTECT BOLT/BATTERY NUT M8 WASHER, LOCK M8 WASHER, FLAT M8 BATTERY 12N24-3.26A19L BATTERY CORD (+) 220 BATTERY CORD (-) 380 QTY. 1 4 4 1 2 4 2 2 1 1 1 REMARKS MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 68 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 4 5 * 6 7# 8# 9 11 13 14 PART NO. 16271ZE3010 17210ZE3505 17218ZE3505 17231ZE3W00 17232891000 17235ZH9N00 17238ZE2310 17239ZE1000 17410ZH9N00 90203ZA0800 934040602008 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER ........................ 1 ......... INCLUDES ITEMS W/ * FILTER, OUTER 1 COVER, AIR CLEANER 1 GROMMET, AIR CLEANER 1 NOSE, MUFFLER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW, AIR CLEANER ......
HONDA GX340K1QAE2 — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 70 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 PART NO. 14100ZE3020 1 14100ZE3305 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .......................... 1 ......... USE FROM ENGINE SN 2708027 ..........................................................................
HONDA GX340K1QAE2 — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 72 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 #%+ * 2 * 3 * 4 * 4 * 6 # * 7 * 8 * 9 10 11 12 13 * 14 15 16 17 18 19 * 19 * 20 * 21 22 * 23 * 24 * 24 * 25$ 26 * 26 * 26 * 27 PART NO.
HONDA GX340K1QAE2 — CONTROL ASSY. CONTROL ASSY. PAGE 74 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 8 11 * 12 * 13 * 14 * 15 * 16 * 19 * 20 * 23 24 26 * 29 * 32 * 33 PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16570ZE3W20 16571ze3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE3W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050320A 93500050160A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSEMBLY, REMOTE ........... 1 .......
HONDA GX340K1QAE2 — CONTROL BOX ASSY. CONTROL BOXASSY. PAGE 76 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CONTROL BOX ASSY. CONTROL BOX ASSY. NO. 1 PART NO.
HONDA GX340K1QAE2 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 78 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 1 * 2 3 3 4 5 7 8 9 # * 10 #% * 11 #% * 12 #% * 13 # * 15 # * 16 17 * 18 # * 19 20 * 21 * PART NO. 06165ZE3000 11300ZE3602 11381ZE3800 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 PART NAME QTY. REMARKS GOVERNOR KIT, OPTIONAL ........................ 1 .........
HONDA GX340K1QAE2 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 80 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 1 5 6 7 PART NO. 13310ZE3601 13351ZE3010 90745ZE2600 961006207000 PART NAME CRANKSHAFT, Q- TYPE WEIGHT, BALANCER KEY 6.3X6.3X43 BEARING, RADIAL BALL 6207 QTY. 1 1 1 1 REMARKS MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 82 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 PART NO. 12000ZE3826 2 3 4 5 6 6 7 9 * 10 10 11 12 13 14 15 16 15510ZE2043 16541ZE3010 32197ZE2003 90013883000 90131883000 90131896650 90446KE1000 91201ZE3004 91201ZE9003 91203952771 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 * PART NAME QTY. REMARKS CYLINDER ASSY., (SELF STARTER ........ 1 .......... INCLUDES ITEMS W/ * + ALERT) SWITCH ASSEMBLY, OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 SUB- HARNESS .............
HONDA GX340K1QAE2 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 84 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 1 2 * 3 * 4 * 5 6 7 8 10 11 12 12 13 14 15 15 16 16 16 16 PART NO. 12200ZF6W00 12200ZF6W01 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE3W00 12310ZE3791 12315ZE3840 12391ZE2020 90014ZE2000 90042ZE8000 90047ZE2000 92900080320E 90441ZE2010 9430112200 957011008000 957251008000 9807955846 9807955855 9807956846 9807956855 PART NAME QTY. REMARKS CYLINDER HEAD ......................................... 1 .......... INCLUDES ITEMS W/ * CYLINDER HEAD .
HONDA GX340K1QAE2 — FAN COVER ASSY. FAN COVER ASSY. PAGE 86 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 6 7 PART NO. 16731ZE2003 19610ZE3010ZA 19631ZE3W00 81329567020 90013883000 PART NAME CLIP, TUBE COVER, FAN *R8* BRIGHT RED SHROUD GROMMET, DRAIN HOLE BOLT, FLANGE 6X12 (CT200) QTY. 1 1 1 1 6 REMARKS MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 88 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 3 6 6 7 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3W01 90201ZE3V00 90201ZE3790 90741ZE2000 PART NAME QTY. REMARKS FAN, COOLING 1 PULLEY, STARTER (SCREEN GRID) 1 FLYWHEEL, 4 POLE 1 NUT, SPECIAL 16MM (1) .............................. 1 .......... USE FROM ENGINE SN 2536523 NUT, SPECIAL 16MM ................................... 1 ..........
HONDA GX340K1QAE2 — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 90 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZA 17620ZH7023 5 17620ZH7023 6 * 7 10 11 12 13 14 17631ZH7003 17672ZE2W01 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER, SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK, FUEL *NH31* MCKINLEY WHITE 1 CAP, FUEL FILLER ....................................... 1 .......... USE UP TO ENGINE SN 4122402 ..............................................................
HONDA GX340K1QAE2 — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 92 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 3 4 5 7 8 9 10 PART NO. 30500ZE2023 30700ZE1013 31511ZE3000 31512ZE2000 31630ZE2841 36101ZE2701 90012888000 90013883000 90015883000 PART NAME QTY. COIL ASSEMBLY, IGNITION 1 CAP ASSEMBLY, NOISE SUPPRESSOR 1 CLAMP, WIRE 1 GROMMET, WIRE 1 COIL ASSEMBLY, CHARGE (3A) 1 WIRE, STOP SWITCH 430MM 1 BOLT, FLANGE 6X40 2 BOLT, FLANGE 6X12 (CT200) 1 BOLT, FLANGE 6X28 2 REMARKS MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — STARTER MOTOR ASSY. STARTER MOTOR ASSY. HONDA GX340K1QAE2 — MANUALS ASSY. PAGE 94 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — STARTER MOTOR ASSY. STARTER MOTOR ASSY. NO. 1 * 2 * 3 * 4 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 17 * 18 * 19 * 20 PART NO. 31204ZA0003 31206ZE3003 31207ZE3003 31201ZE3013 31211ZE2003 31212ZE3003 31213ZE2003 31215ZE2003 31218ZE3003 31219ZE2003 31222ZE3791 31231ZE2003 31232ZE3003 31233ZE2003 90110ZE2003 91601ZE2003 90007ZE2003 938920501408 938920503208 9407006080 957010803508 PART NAME QTY.
HONDA GX340K1QAE2 — MUFFLER ASSY. MUFFLER ASSY. PAGE 96 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 6 8 9 11 12 13 14 15 PART NO. 18310ZE3W00 18320ZE3W01 18323ZE3W40 18330ZE2W00 18331ZE3810 18333ZF6W01 18333ZK6Y00 18355ZE2W10 18381ZE2W10 90013883000 90050ZE1000 90055ZE1000 93500060060B 9405008000 PART NAME QTY. REMARKS MUFFLER 1 PROTECTOR, MUFFLER 1 PROTECTOR, EXHAUST PIPE 1 PIPE, EXHAUST 1 CAP, MUFFLER 1 GASKET, EXHAUST PIPE ............................ 1 .......... USE FROM ENGINE SN 3030998 GASKET, EXHAUST PIPE (WACKER) ......... 1 .....
HONDA GX340K1QAE2 — PISTON ASSY. PISTON ASSY. PAGE 98 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 PART NO. 13010ZE3003 13011ZE3003 13012ZE3003 13013ZE3003 13101ZE3W00 13102ZE3W00 13103ZE3W00 13104ZE3W00 13111ZF6000 13200ZE3010 13200ZE3315 5 6 90001ZE8000 90601ZE3000 PART NAME RING SET, PISTON (STANDARD) RING SET, PISTON (OS 0.25) (OPT.) RING SET, PISTON (OS0.50) (OPT.) RING SET, PISTON (0.75) (OPTIONAL) PISTON, STANDARD PISTON, OS 0.25 (OPTIONAL) PISTON, OS 0.50 (OPTIONAL) PISTON, 0.
HONDA GX340K1QAE2 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 100 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 PART NO. 28400ZE3W01ZA 2 28410ZE3W01ZA * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28445ZE2W01 28461ZE2W02 28462ZV7003 28469ZE2W01 90004ZE2W01 957010600800 PART NAME QTY. REMARKS STARTER ASSEMBLY, RECOIL ................... 1 ..........
HONDA GX340K1QAE2 — LABELS ASSY. LABELS ASSY. PAGE 102 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
HONDA GX340K1QAE2 — LABELS ASSY. LABELS ASSY. NO. 1 3 4 6 PART NO. 87521ZE3W01 87522ZH9000 87528ZE2810 87532ZH8810 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE (EXTERNAL) MARK, OIL ALERT (E) QTY. 1 1 1 1 REMARKS MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MAYCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX
