© COPYRIGHT 2003, MULTIQUIP INC. OPERATION AND PARTS MANUAL Vibratory Walk-Behind Roller Model MDR-9DYE (Yanmar Diesel) Revision #0 (12/19/03) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MAYCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPA
TABLE OF CONTENTS MIKASA MDR-9DYEVIBRATORY ROLLER Yanmar L100EEDEVMK2 Engine Proposition 65 Warning ..............................................2 Here's How To Get Help .............................................3 Table Of Contents ......................................................4 Parts Ordering Procedures ........................................5 Safety Message Alert Symbols .............................. 6-7 Rules for Safe Operation .......................................
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Ground orders are treated as “Standard Orders”, and will ✓ FedEx or UPS Second Day or Third Day ship within 24 hou
MDR-9DYE — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model MDR-9DYE Vibration Roller.
MDR-9DYE — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the vibration roller is not in use. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection. Other important messages are provided throughout this manual to help prevent damage to your vibration roller, other property, or the surrounding environment.
MDR-9DYE — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the MIKASA MDR-9DYE Vibratory Roller. GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MDR-9DYE — RULES FOR SAFE OPERATION ■ NEVER disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties. Loading and Unloading (Crane) ■ Before lifting, make sure that machine parts (hook and vibration insulator) are not damaged and screws are not loosened or lost.
MDR-9DYE — OPERATION AND SAFETY DECALS Figure 1 displays the operation and safety decals as they appear on the vibratory roller. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set. Figure 1. Operation and Safety Decals PAGE 10 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — SPECIFICATIONS Table 1. MDR-9DYE VIBRATORY ROLLER SPECIFICATIONS Centrifugal Force 6,600 lbs. (3,000 kg) Vibration Frequency 3,000 vpm Traveling Speed (forward and reverse) 0 to 1.8 mph (0 to 3 km/hr) Grade Ability 25° Diameter x Width of Roller 18 x 27.6 in (457 x 700 cm) Wheel Base 22.4 in (570 mm) Side Road Clearance 10.8 in (274 mm) Length (with Handle) 111.8 in (2,840 mm) Width 31.3 in (795 mm ) Height 44.1 in (1,120 mm ) Total Weight 1,940 lbs.
MDR-9DYE — DIMENSIONS Figure 2. MDR-9DYE Vibratory Roller Dimensions TABLE 3. ROLLER DIMENSIONS REF. DIMENSIONS REF. DIMENSIONS A 111.8 in. (2.8 meters) F 22.4 in. (.57 meters) B 88 in. (2.23 meters) G 18 in. (.457 meters) C 46 in. (1.17 meters) H 15.5 in. (.382 meters) D 45.9 in. (1.16 meters) I 5.4 in. (.137 meters) E 11 in. (.279 meters) PAGE 12 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
NOTE PAGE MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — GENERAL INFORMATION The Mikasa Model MDR-9DYE is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. With 28-inch drums and 32 inches overall width, virtually any asphalt or mixed granular soil compaction job is quickly cut down to size. The impact force of the MDR-9DYE levels and uniformly compacts voids between soil particles to increase dry density. Features include: Hydraulic variable speed transmission assures easy handling.
MDR-9DYE — GENERAL INFORMATION CAUTION : Tipping (Rollovers) NEVER! stand under, or get onto the roller while it is being lifted or moved. NEVER! operate the roller on side slopes (Figure 5). The possibility exist that the roller could tip over (roll over), thus causing bodily harm even death and serious damage to the equipment. CAUTION : ONLY! use steel ropes or chains that are capable of lifting at least 1,940 lbs. (880 kg ). CAUTION : NEVER! use any other part of the roller for lifting purposes.
MDR-9DYE — VIBRATORY ROLLER COMPONENTS Figure 6. MDR-9DYE Vibratory Roller Components Figure 6 illustrates the location of the major components for the MDR-9D Vibratory Roller. The function of each component is described below: 7. Engine – This vibratory roller uses a YANMAR L100EEDEVMK2 diesel engine. Refer to the owner’s manual for engine information and related topics. 1. Handle Bar – When operating the roller, this handle is to be in the downward position.
MDR-9DYE — YANMAR L100EE-DEVMK2 ENGINE COMPONENTS Figure 7. YANMAR L100EE-DEVMK2 Engine Components ENGINE COMPONENTS Figure 7 illustrates the location of the major engine components of the Yanmar engine. Each component is described below: 6. Recoil Starter – Housing for pull rope and starter. 7. Oil Filler Cap/Dipstick – Remove this cap to add oil to the oil tank. Use dipstick to check oil level. 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank.
MDR-9DYE — INSPECTION CAUTION : 3. Never operate the vibratory roller in a confined area or enclosed structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the vibratory roller. BEFORE STARTING 1. Read safety instructions at the beginning of manual. 2. Familiarize yourself with the operating and control elements of the machine and the working environment.
MDR-9DYE — INSPECTION CHECKING HYDRAULIC SYSTEM CHECKING THE CLUTCH BOX OIL LEVEL 1. 1. Check clutch box for any oil leakage. 2. Remove the level plug and check oil level (Figure 12). 3. Add oil if necessary. Check the oil tank level gauge (Figure 10). Oil level should be at the middle indication of the gauge or higher. Fill as required 2. Check the surroundings of the oil tank, hydraulic pump and motor for oil leakage. Figure 12. Clutch Box Oil Level Check Figure 10.
MDR-9DYE — INSPECTION CHECKING WATER TANK POSITIONING THE HANDLE BAR 1. 1. Release the handle bar release pin (Figure 15) and position the handle bar to the lowered position before starting operation. 2. When machine is not in use, release the handle bar release pin and position the handle bar to the upright position. Check the water tank to see if filled. Add water if necessary. The water tank has a capacity of approximately 6 gallons (23 liters) (Figure 14). Figure 14.
MDR-9DYE — OPERATION 3. Insert the starter key into the key switch and turn it to the RUN position (Figure 17). Figure 19. Decompression Lever Figure 17. Starter Key 4. Turn the starter key further to the right to the START position to start the engine. 5. If the engine fails to start, DO NOT continue to rotate the starter key for more than 5 seconds. Return the key to the RUN position and wait 20 to 30 seconds before starting again. 6.
MDR-9DYE — OPERATION TRAVELING VIBRATING CAUTION : 1. Make sure to follow all safety rules referenced in the safety section of this manual before operating roller. Keep work area clear of debris and other objects that could cause damage to the roller or bodily injury. Shift the two vibrator levers (Figures 21 and 22) to the vibrate position to start vibrations. 1. To make the roller move in the forward direction push the travel lever ( Figure 20) forward.
MDR-9DYE — OPERATION STOPPING LIFTING 1. Place the vibrator and travel levers to the neutral position. 1. 2. Slow down the engine and allow to cool for at least 2 minutes. In an electric start, return the key switch to the STOP position as soon as the engine stops. Use a crane or lift to load and unload the machine. A skilled crane operator is required to perform the job. 2. When lifting the machine, check for any damaged or loose bolts, lifting hooks, and shock mounts. 3.
MDR-9DYE — MAINTENANCE CAUTION: CAUTION: Fuel piping and connections should be replaced every 2 years. Inspection and other services should always be carried out on hard and level ground with the engine shutdown. INSPECTION AND MAINTENANCE SERVICE TABLES 1. To make sure your plate vibratory roller is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7. TABLE 5. MDR-9DYE MACHINE INSPECTION HOURS OF OPERATION ITEM REMARKS TABLE 6.
MDR-9DYE — MAINTENANCE ENGINE OIL REPLACEMENT 1. Replace engine oil in the first 25 hours of operation and every 50 to 100 hours afterwards. 2. Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's Manual). AIR FILTER 1. The air filter element should be cleaned because a clogged air cleaner can cause poor engine starting, lack of power and shorten engine life substantially. Figure 27.
MDR-9DYE — MAINTENANCE HYDRAULIC OIL CHECK HYDRAULIC OIL FILTER CHECK 1. Check for any oil leakage from the hoses and joints daily. 1. The hydraulic oil filter should be replaced after first 25 hours of operation. 2. Check hydraulic oil level every 4 to 5 hours after starting operation. 3. After one week of operation, check hydraulic level twice a day . 2.
MDR-9DYE—MAINTENANCE HYDRAULIC AIR EXTRACTION 1. After filling hydraulic oil tank with oil, loosen the oil hose joint and check that oil is enough to reach the oil suction and outlet ports in the hydraulic transmission. Tighten the hose joint securely after checking. 2. Loosen the charge relief valve located on the front side of the hydraulic transmission (Figure 33). Figure 34. Unscrewing Right Lock Nut Figure 33. Loosening Charge Relief Valve 3. Check that oil flows out from the valve hole. 4.
MDR-9DYE—MAINTENANCE If the neutral position of the travel lever and the neutral point of z DO NOT close the exhaust outlet of battery. The gas pressure transmission do not match after adjustment is repeated, align as building up in the battery may cause explosion. follows: z Before using a battery charger, read and understand the charger instruction manual thoroughly. 1.
MDR-9DYE — ENGINE TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine and Roller Troubleshooting (Tables 8 and 9) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
MDR-9DYE — ENGINE TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 8) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
MDR-9DYE — ROLLER TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Roller Troubleshooting (Table 9) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 9.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. NOTE The contents of this parts catalog are subject to change without notice. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
SUGGESTED SPARE PARTS MQ MIKASA MDR-9DYE VIBRATORY WALK-BEHIND ROLLER W/YANMAR L100EE-DEVMK2 DIESEL ENGINE 1 to 3 Units Qty. P/N 3 .......... 501010440 ........... 1 .......... 075080061 ........... 6 .......... EM505834 ............ 3 .......... 502303040 ........... 6 .......... 11465012590 ....... 1 .......... 11465076631 ....... 3 .......... 11425055100 ....... 6 .......... 11425055121 ....... 3 .......... 11425035110 ....... 3 .......... 10610077630 .......
MDR-9DYE — DECAL PLACEMENT DECAL PLACEMENT PAGE 34 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — DECAL PLACEMENT DECAL PLACEMENT NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 920200591 920200630 920201590 920101510 920203290 920200450 920101290 920201100 920200320 920200440 920200470 920101480 920101280 920101200 PART NAME PLATE, CAUTION PLATE, SERIAL NO. DECAL, MQ MARK 98X70 DECAL, MIKASA MARK 440MM DECAL, CAUTION DECAL, OIL FILTER DECAL, VIBRATION DECAL, CLUTCH LEVER DECAL, WATER TANK DECAL, PROHIBIT TOW DECAL, OIL TANK DECAL, OIL LEVEL DECAL, FORWARD & REVERSE DECAL, GREASE QTY.
MDR-9DYE — BODY ASSY. BODY ASSY. PAGE 36 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — BODY ASSY. BODY ASSY. NO. 1 2 3 4 5 6 8 9 10 42 43 44 45 46 48 49 51 52 53 54 55 56 57 58 59 60 68 69 82 83 PART NO.
MDR-9DYE — FRONT COVER ASSY. FRONT COVER ASSY. PAGE 38 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — FRONT COVER ASSY. FRONT COVER ASSY. NO. 13 14 16 17 18 20 21 22 23 24 25 26 27 28 31 32 33 34 35 36 37 38 39 41 PART NO. 031110160 502103800 001220820 030208200 952401560 502302490 001220815 030208200 031108160 502302500 001221020 030210250 021110160 001220825 502215470 001221020 030210250 031110160 001221015 030210250 031110160 502010650 407310670 954403241 PART NAME FLAT WASHER M10 FRONT COVER BOLT 8X20 T LOCK WASHER M8 WASHER 8.
MDR-9DYE — FRONT COVER ASSY. (CONTINUED) FRONT COVER ASSY. PAGE 40 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — FRONT COVER ASSY. (CONTINUED) FRONT COVER ASSY. NO. 65 66 81 82 83 88 89 90 91 92 93 94 95 96 97 98 100 101 102 103 104 105 106 107 108 109 110 PART NO.
MDR-9DYE — AXLE ASSY. AXLE ASSY. PAGE 42 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — AXLE ASSY. AXLE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17 18 19 20 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 PART NO.
MDR-9DYE — AXLE ASSY. (CONTINUED) AXLE ASSY. PAGE 44 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — AXLE ASSY. (CONTINUED) AXLE ASSY. NO. 40 41 42 43 44 45 46 47 48 49 50 51 52 54 55 61 PART NO.
MDR-9DYE — TRANSMISSION ASSY. TRANSMISSION ASSY. PAGE 46 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — TRANSMISSION ASSY. TRANSMISSION ASSY. NO. 1 2 3 4 5 6 7 8 9 11 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 37 38 39 40 41 63 64 PART NO.
MDR-9DYE — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. PAGE 48 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. NO. 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 104 PART NO. 050200160 501010720 501010590 501010600 502302850 502302840 502201000 502010640 502010650 953405270 953405260 953405840 953400020 001221035 030210250 031110160 959010110 952401960 920200470 PART NAME O-RING P-16 JOINT 3/4-16 JOINT 3/8 JOINT 1/4 OIL HOSE 3/8 320L OIL HOSE 1/4 320L OIL TANK ELBOW 90 DEG. 3/8 ELBOW 90 DEG.
MDR-9DYE — CLUTCH BOX ASSY. CLUTCH BOX ASSY. PAGE 50 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — CLUTCH BOX ASSY. CLUTCH BOX ASSY. NO. A 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 10 * 10 * 10 * 11 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 23 * 24 * 25 * 26 27 28 29 30 31 32 33 34 34 PART NO.
MDR-9DYE — CLUTCH BOX ASSY. (CONTINUED) CLUTCH BOX ASSY. PAGE 52 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — CLUTCH BOX ASSY. (CONTINUED) CLUTCH BOX ASSY. NO. 35 * 36 * 37 * 38 * 39 * 40 * 42 * 43$ 44$ 45$ 46$ 47$ 48$ 49$ 50$ 51$ 52$ 53$ 54 PART NO. 953405260 502302650 959402980 001521025 501010950 502302660 501402260 501402400 501302160 042006204 952400930 080100470 952400130 001200820 030208200 001221035 030210250 031110160 501910040 PART NAME QTY.
MDR-9DYE — VIBRATION CASE ASSY. VIBRATION CASE ASSY. PAGE 54 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — VIBRATION CASE ASSY. VIBRATION CASE ASSY. NO. 1 2 3 4-1 4-2 5 6 7 8 9 10 11 12 13 14 15 15 16 17 18 20 21 23 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 PART NO.
MDR-9DYE — UPPER CONTROL HANDLE ASSY. UPPER CONTROL HANDLE ASSY. PAGE 56 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — UPPER CONTROL HANDLE ASSY. UPPER CONTROL HANDLE ASSY. NO. 1 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 34 39 40 41 42 43 44 48 49 50 51 52 53 60 PART NO.
MDR-9DYE — UPPER CONTROL HANDLE ASSY. (CONTINUED) UPPER CONTROL HANDLE ASSY. PAGE 58 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — UPPER CONTROL HANDLE ASSY. (CONTINUED) UPPER CONTROL HANDLE ASSY. NO. 61 62 63 93 94 95 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 PART NO.
MDR-9DYE — LOWER CONTROL HANDLE ASSY. LOWER CONTROL HANDLE ASSY. PAGE 60 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — LOWER CONTROL HANDLE ASSY. LOWER CONTROL HANDLE ASSY. NO. 2 3 4 5 6 7 8 9 10 11 12 28 29 30 31 34 36 37 38 39 45 46 47 56 57 58 59 60 64 76 87W 88W 89W 90W 91W 96 PART NO.
MDR-9DYE — BATTERY ASSY. BATTERY ASSY. PAGE 62 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — BATTERY ASSY. BATTERY ASSY. NO. PART NO. 70 502215490 71 001200815 72 030208200 73 502403310 74 502403320 75 020308060 76 030208200 77 031108160 78 607010030 79 502301040 80 502301050 PART NAME BATTERY BASE BOLT 8X15 SW M8 BATTERY PROTECT BOLT/BATTERY NUT M8 WASHER, LOCK M8 WASHER, FLAT M8 BATTERY 12N24-3.26A19L BATTERY CORD (+) 220 BATTERY CORD (-) 380 QTY. 1 4 4 1 2 4 2 2 1 1 1 REMARKS MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — IGNITION SWITCH/MOUNTING PLATE ASSY. IGNITION SWITCH AND MOUNTING PLATE ASSY. PAGE 64 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
MDR-9DYE — IGNITION SWITCH/MOUNTING PLATE ASSY. IGNITION SWITCH AND MOUNTING PLATE ASSY. NO. PART NO. PART NAME 1 34578 SWITCH HOLDER 2 11435177500 SWITCH, IGNITION 3 10610077630 KEY, IGNITION QTY. 1 1 1 REMARKS MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE DEVMK2 — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. PAGE 66 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE DEVMK2 — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY.
YANMAR L100EE DEVMK2 — CYLINDER HEAD AND COVER ASSY. CYLINDER HEAD AND BONNET ASSY. PAGE 68 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE DEVMK2— CYLINDER HEAD AND COVER ASSY. CYLINDER HEAD AND COVER ASSY. NO PART NO PART NAME QTY. REMARKS 1 11465111020 CYLINDER HEAD 1 6 11465111100 VALVE, SUCTION 1 7 11465111110 VALVE, EXHAUST 1 8 11465011121 SPRING, VALVE 2 9 11962011180 RETAINER, SPRING 2 10 11465111250 SUPPORT CMP, ARM .............................. 1 ................. INCLUDES ITEMS W/ * 11 11465111260 SUPPORT, ROCKER ARM 1 * 12 11465111650 ARM ASSY.
YANMAR L100EE-DEVMK2— MUFFLER ASSY. MUFFLER ASSY. PAGE 70 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— MUFFLER ASSY. MUFFLER ASSY. NO PART NO 17 11465013201 24 11497013551 25 16026001580 26* 11497013561 27* 11497013700 28* 11497013710 30* 26106080182 31* 26216080182 32 26366080002 37 10519813621 40# 10509813990 41 11498513701 42+ 10509813990 43+ 26113060082 PART NAME QTY. REMARKS GASKET, NON-ASB. 1 MUFFLER ASSY. ...................................... 1 .................
YANMAR L100EE-DEVMK2— AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 72 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— AIR CLEANER ASSY. AIR CLEANER ASSY. NO PART NO 1 11465012211 2 71465012560 4 11465012520 5* 11465012530 6* 11425212560 7* 11465012590 10* 11425212550 11* 11425012300 12 11469912020 13 11465012301 14 26106060252 15 26226060142 16 26226060752 PART NAME QTY. REMARKS GASKET, AIR CLEANER 1 CLEANER ASSY. AIR ............................... 1 .................
YANMAR — CRANKSHAFT, PISTON AND CAMSHAFT ASSY. CRANKSHAFT, PISTON AND CAMSHAFT ASSY. PAGE 74 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR — CRANKSHAFT, PISTON AND CAMSHAFT ASSY. CRANKSHAFT, PISTON AND CAMSHAFT ASSY. NO PART NO PART NAME QTY. REMARKS 1 71466014100 CAMSHAFT ASSY., D 1 6 11465014200 TAPPET 2 7 11477114260 TAPPET, F.O. 1 8 11465014401 ROD, PUSH 2 12 71465421730 CRANKSHAFT ASSY. 1 20 12271001220 NUT, M18 1 21 11465021551 WASHER, FLYWHEEL 1 22 11466221593 FLYWHEEL, DEJ., W/GEAR ..................... 1 .................
YANMAR L100EE-DEVMK2— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP AND GOVERNOR ASSY. PAGE 76 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP AND GOVERNOR ASSY. NO PART NO PART NAME QTY. REMARKS 1 11465032010 PUMP ASSY. LUB. OIL 1 6 11425032070 COVER, LUB. OIL PUMP 1 7 10333832570 O-RING 1 8 22312030160 PARALLEL PIN 3 X 16 1 9 26476060142 BOLT, M 6 X14, TAPPING 3 10 11425035110 STRAINER, LUB. OIL ASSY. .................. 1.................... INCLUDES ITEMS W/ * 11 11425035070 STRAINER, LUB. OIL 1 * 12 24341000224 O-RING 1A S-22.
YANMAR L100EE-DEVMK2 — COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. PAGE 78 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. NO PART NO PART NAME QTY. REMARKS 1 11465045201 COVER 1 2 11435045320 RUBBER, SEAL 1 3 11435045340 COLLAR 1 4 18372055210 GROMMET 1 5 26106060202 BOLT M 6 X 20 PLATED 1 6 11466845102 CASE, FAN SILVER 17 1 7 11425045301 RUBBER, CUSHION 4 8 11425045310 COLLAR 4 9 11465045330 SEAL, FAN CASE 1 10 11437045351 BOLT, FAN CASE 4 11 11466076052 RECOIL STARTER D ASSY. .................. 1....................
YANMAR L100EE-DEVMK2— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. PAGE 80 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. NO PART NO PART NAME QTY. REMARKS 2 71465651110 PUMP ASSY., FUEL INJECTORS .......... 1.................... INCLUDES ITEMS W/ * 3 10554651020 GASKET 1 * 4 11425051080 PLATE 1 5* 11497051100 BODY, F.I. PUMP 1 10* 11425051160 SPRING 1 11* 11465051300 VALVE ASSY., DELIVERY 1 14* 10554651330 SPRING, DELIVERY VALVE 1 15* 11425051340 HOLDER, F. I. P. DELIVERY 1 16* 12455051350 GASKET, DELIVERY 2 17* 11425051600 LEVER ASSY.
YANMAR L100EE-DEVMK2 — FUEL TANK AND FUEL PIPE ASSY. FUEL TANK AND FUEL PIPE ASSY. PAGE 82 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — FUEL TANK AND FUEL PIPE ASSY. FUEL TANK AND FUEL PIPE ASSY. NO PART NO PART NAME QTY. REMARKS 1 71465055130 TANK ASSY., FUEL ................................ 1 .................... INCLUDES ITEMS W/ * 3 11428855041 CAP ASSY., FUEL TANK ........................ 1 ....................
YANMAR L100EE-DEVMK2 — STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR AND DYNAMO ASSY. PAGE 84 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR AND DYNAMO ASSY. NO PART NO PART NAME QTY. REMARKS 1 11436277011 STARTER, S114-651A ............................ 1 .................... INCLUDES ITEMS W/ * 2 11438177110 ARMATURE 1 * 3 X2114811000 WASHER KIT, THRUST 1 4* X2114715500 STOPPER SET, PINION 1 5* 11438177130 COIL ASSY., FIELD 1 6* 11438177140 COVER, REAR 1 7* 11437177160 HOLDER ASSY., BRUSH ........................ 1 ....................
YANMAR L100EE-DEVMK2 — TOOL LABEL AND GASKET SET ASSY. TOOL LABEL AND GASKET SET ASSY. PAGE 86 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
YANMAR L100EE-DEVMK2 — TOOL LABEL AND GASKET SET ASSY. TOOL LABEL AND GASKET SET ASSY. NO PART NO PART NAME 4 5 6 7 26 27 28* 29* 30* 31* 32* 33* 34* 35* 36* 37* 38* 39* 40* 41* 42* * 11425007090 11425007111 11426807240 11426107350 71465192620 11465101330 11465001380 11465001412 11429901950 11425001841 22190160002 11465011340 11477111461 11465111310 11465012301 11465012211 11465013201 10333832570 24341000224 24311000125 23414080000 QTY.
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MAYCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX
