OPERATION AND PARTS MANUAL SlabSaver SERIES MODEL FCG1-6HA CONCRETE SAW (HONDA GX200UQXC9 GASOLINE ENGINE) Revision #1 (03/19/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis.
TABLE OF CONTENTS FCG16HA SlabSaver Concrete Saw Honda GX200QXC9 Engine Proposition 65 Warning .............................................2 Silicosis/Respiratory Warnings ..................................3 Table Of Contents .....................................................4 Specifications ............................................................5 Dimensions ...............................................................6 Safety Message Alert Symbols .............................
SPECIFICATIONS Table 1. FCG1 Concrete Saw Specifications Arbor Size in. (mm) 0.675 In. (15.9 mm) MAX Blade Width in. (mm) 0.375 In. (9.5 mm) Blade Capacity in. (mm) 10 In. (254 mm) Cutting Depth in. (mm)) 3.25 In. (82.6 mm) Nominal Mass* lbs. (kg) 106 Lb. (48 Kg) Maximum Operating Mass** lbs. (kg) 113 Lb. (51 Kg) A-Weighted Sound Pressure Level at Operator's Position 88.3 dB (A) Guaranteed Sound Power Level 110.0 dB (A) Hand/Arm Vibration (At Handle)*** 7.
DIMENSIONS Side View Front View Figure 1. FCG16HA Concrete Saw Dimensions TabTable le 3.3.FDimensions CG1 Concrete Saw Dimensions REFERENCE LETTER A B C D E F G DESCRIPTION Max Height (Handle Bars Fully Raised) Max Height (Handle Bars Fully Lowered) Max Length (Handle Bars Fully Raised & Front Pointer Lowered) Max Length (Handle Bars Fully Raised & Front Pointer Raised) Max Length (Handle Bars Fully Lowered & Front Pointer Raised) Max Overall Width Max Handle Bar Deflection DIMENSION (CM) 118.7 CM (46.
SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read, understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide instructions for the safe and efficient operation of the FCG16HA Concrete Saw.
SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions ALWAYS wear approved respiratory protection. Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. Guards and Covers In Place ALWAYS wear approved eye and hearing protection.
RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION WARNING Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the FCG16HA Saw. ■ NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine. ■ NEVER operate the saw under the influence or drugs or alcohol.
RULES FOR SAFE OPERATION General Safety Diamond Blade Safety ■ ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment. ■ Use appropriate steel centered diamond blades manufactured for use on concrete saws. See further blade information on pages 21 through 23. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. ■ NEVER leave the machine unattended while running.
RULES FOR SAFE OPERATION Maintenance Safety NEVER lubricate components or attempt service on a running machine. ALWAYS allow the machine a proper amount of time to cool before servicing. Keep the machinery in proper running condition. Fix damage to the machine immediately and ALWAYS replace broken parts. Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters. DO NOT use food or plastic containers to dispose of hazardous waste.
GENERAL INFORMATION Intended Use Operate the FCG16HA Saw, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The risk of such use lies entirely with the user. The manufacturer cannot be held liable for damages as a result of misuse. This saw is not intended for wet cutting. (The use of water sprayed onto the tool [blade] during the cutting operation).
NOTES FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
COMPONENTS CONTROLS & COMPONENTS Figure 3. FCG16HA Concrete Saw PAGE 14 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
COMPONENTS Figures 3 shows the location of the basic controls or components, for the FCG16HA Concrete Saw. Listed below is a brief explanation of each control or component 20. Screw Plunger – Line up bottom edge of Depth Stop Rod on Screw Plunger across from desired depth line mark. 21. Depth Stop Rod – Holds blade above working surface or allows blade to cut into working surface at specified depth. 1. Hand Grips/Handlebar – When operating the saw, place both hands on each grip to maneuver the saw. 2.
BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING 6. The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 7. Air Cleaner – Prevents dirt and other debris from entering the fuel system.
GUARDS, COVERS AND V-BELTS WARNING NEVER operate the saw without blade guards and covers in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operation. Adhere to the safety guidelines of the American National Standards Institute (ANSI) B7.1 and B7.5. V-belt Alignment and Tensioning This concrete saw is equipped with a premium V-belt that has been aligned and tensioned by factory personnel.
GUARDS, COVERS AND V-BELTS 3. Tighten the adjusting hex screw (4) while holding the engine in place to maintain pulley alignment. (a screwdriver can be used as a lever at the rear belt guard mounting boss to hold the back of the engine while adjusting V-belt tension.) 4. Re-tighten the locking nut (3). 5. With V-belt held in proper alignment, (engine parallel with the frame), re-tighten the 4 engine mounting hex screws. Verify that all hex screws are properly tightened.
BLADES SPECIFIC TOOLS TO BE USED 1. Stress Relief Holes (Gullets) – Check the steel core for cracks that may have propagated from the slots and/or gullets. Cracks indicate extreme fatigue failure and if sawing continues, catastrophic failure will occur. 2. Edge Of The Steel Core – Check the diameter edge for discoloration (blue oxidation) indicating an overheating condition caused by insufficient cooling water/air.
BLADE PLACEMENT Table 4. Material Listing And Blade Selection Material Blade Cured Concrete Cured Concrete Blade Green Concrete Green Concrete Blade Asphalt Asphalt Blade Asphalt over Concrete Asphalt/Concrete Blade Block, Brick, Masonry, Refractories Masonry Blade Tile, Ceramic, Stone Tile Blade Diamond Blades Cutting Depth Selecting the diamond blade TYPE and GRADE defines how the blade will perform both in cutting speed and blade life.
BLADE PLACEMENT 4. Diamond Blade - Ensure that the proper diamond blade has been selected for the job. Pay close attention to the directional arrows on the blade. The blade's operating directional arrows must point in a "down-cutting" direction to perform correctly. When placing the blade onto the blade shaft, ensure the arbor hole of the blade matches the diameter of the shaft.
BLADE PLACEMENT Cutting Depth Adjustment The FCG16HA Saw is equipped with a Raise/Lower Assembly that is supported by the following components (Figure 13). Figure 14. Raise/Lower Adjustment Wheel WARNING Dropping or forcing the blade onto the cutting surface can severely damage the diamond blade and may cause serious damage to the saw and bodily harm. Figure 13.
INSPECTION Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the saw, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. Figure 16. Engine Oil Dipstick (Oil Level) 4. Check carburetor for external dirt and dust. Clean with dry compressed air. 5. Check fastening nuts and bolts for tightness. Engine Oil Check 1.
OPERATION OPERATION CAUTION DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps may vary. See included engine manufacturer's operating manual. 1. Ensure the engine Shutdown switch and the engine ON/ OFF switch on the engine are both in the OFF position to avoid accidental starting. The Engine Stop Switch serves both as an Emergency Engine Shut-Off and as the primary Shutdown switch.
OPERATION 3. Place the engine Shutdown switch (next to the handle lock), and the engine ON/OFF switch on the engine to the "ON" position. Shutting the engine off using this switch confirms that is is functioning properly. Always use the Engine Shutdown Safety Switch located next to the handle lock to shut down the engine. Shutting the engine off using this switch confirms that is is functioning properly. 4. Place the Choke Lever (Figure 20) in the "CLOSED " position. Figure 21. Throttle Lever 6.
OPERATION 7. If the engine has started, slowly return the choke lever (Figure 20) to the "OPEN" position. If the engine has not started repeat steps 1 through 5. 8. Before the saw is placed into operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a loose guards and/or covers. Stopping the Engine Stopping the engine under normal conditions: 1. Place the engine throttle lever (Figure 23) in the SLOW position, and listen for the engine speed to decrease.
OPERATION Restarting After Intervention If cutting is interrupted where the engine stops or is turned off while the blade is still in the cut: a. Turn engine Shutdown switch (next to the handle lock) to the "OFF" position. b. Raise the blade out of the cut c. Restart the engine as described in the Start-Up sections on page 24. CAUTION The only acceptable method for freeing a stuck blade is to remove the saw from the stuck or pinched blade.
MAINTENANCE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. CAUTION ALWAYS allow the engine to cool before servicing. NEVER attempt any maintenance work on a hot! engine. WARNING ALWAYS ensure that the engine ON/OFF switch is in the "OFF" position and that the arbor shaft has COMPLETELY STOPPED ROTATING before performing any of the the following operations: 3.
MAINTENANCE Engine tank & strainer: Clean every year/or 300 hours. Engine Oil Change Fuel line: Replace every two years/or as necessary. Refer to Figure 27. Drain the used oil while the engine is warm by the following: Spark plug: Clean/adjust every 6 months/or 100 hours. Replace every year/ or 300 hours. Chassis Lubrication Regular lubrication of various components of the FCG16HA Saw are critical to ensure a reasonable service life.
TROUBLESHOOTING (SAW) TABLE 6. BLADE TROUBLESHOOTING SYMPTOM Blade slows or stops cutting, still remains on blade Blade does not cut straight and/or true. Blade discoloring, crackling and/or wearing excessively. POSSIBLE PROBLEM SOLUTION Blade too hard for the material being cut? Consult Dealer or Multiquip for correct blade. Try cutting very soft material (sandstone, silica brick, cinder block) to "Redress" the blade. Engine torque diminished because of loose V-belt? Tighten and/or replace V-Belt.
TROUBLESHOOTING (ENGINE) TABLE 7. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". POSSIBLE CAUSE Spark plug bridging? Check gap, insulation or replace spark plug. Carbon deposit on spark plug? Clean or replace spark plug. Shor t circuit due to deficient spark plug insulation? Check spark plug insulation, replace if worn. Improper spark plug gap? Set to proper gap. ON/OFF switch is shor ted? Check switch wiring, replace switch.
TROUBLESHOOTING (ENGINE) TABLE 7. TROUBLESHOOTING (ENGINE, CONTINUED) SYMPTOM POSSIBLE CAUSE Air cleaner not clean? SOLUTION Clean or replace air cleaner. Check float adjustment. "Weak in power" compression is proper and does not misfire. Improper level in carburetor? Rebuild carburetor. Defective spark plug? Clean or replace spark plug. Improper spark plug gap? Set to proper gap. Water in fuel system? Flush fuel system and replace with correct type fuel.
NOTES FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS FCG16HA CONCRETE SAW 1 TO 3 UNITS WITH HONDA GX200QXC9 ENGINE 1 to 3 Units Qty. ........ P/N .............................. Description 2 ............ 16052 .......................... BELT 4 ............ 25407 .......................... WHEELS 2 ............ 15028 .......................... COLLARS, WHEEL 2 ............ 15081 .......................... GRIP, HANDLE 1 ............ 25380 .......................... BLADE, SHAFT/FLANGE 2 ............ 15359 ..........................
DECAL LOCATOR DECAL LOCATOR 16 17 3 1 4 P 2 D OW ER CO A 5 “BELT DRIVE” AT E D MODEL SERIAL NO. WARNING California - Proposition 65 Warning Engine exhaust and some of its byproducts are known to the State of California to cause cancer, birth defects, and other reproductive harm. WARNING Always use approved respiratory protection. Adhere to safety guidelines. OSHA Regulations (Standards29 CFR) 1926.
DECAL LOCATOR DECAL LOCATOR NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 38231 38213 36099 13118 38230 25427 20525 15580 15581 38239 25491 11246 25867 35137 38226 35166 PART NAME QTY. REMARKS DECAL, SLAB SAVER LARGE 1 DECAL, MQ LOGO 3.0 X 3-3/4 2 DECAL, SAFETY CLOTHING ISO BLUE ............................. 1 .......... SAFETY ITEM DECAL, POWDER COATED 1 SERIAL NUMBER PLATE ...................................................... 1 .......... CONTACT PARTS DEPT.
GUARDS ASSY. GUARDS ASSY. 1 2 5 4 6 4 3 2 3 12 7 17 5 10 12 11 14 12 15 13 16 8 16 14 15 16 PAGE 38 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
GUARDS ASSY GUARDS ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 25387 4196 0166 A 10136 12287 25430 25431 15161 25397 25428 25429 10024 15509 0424 0949 0948 25401 PART NAME QTY. REMARKS GUARD, BELT ...................................................... 1 ......... SAFETY ITEM SCREW, HHC 3/8 - 16 X 0.75 3 WASHER, LOCK 3/8 MED 3 WASHER, FLAT 3/8 SAE 3 SCREW, THP 1/4 - 20 X 3/4 SS 3 SHEET, REAR WATER SHIELD ........................... 1 ......... SAFETY ITEM FLAP, REAR WATER SHIELD ..........
GUIDES ASSY. GUIDES ASSY. PAGE 40 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
GUIDES ASSY. GUIDES ASSY. NO. PART NO. 1# 20473 2# 1456 3# 1007 4# 25449 5# 10133 6 25392 7# 3215 8# 36128 9# 10176 10 * 35476 11 21369 * 12 * 21189 13 21185 * 14 * 21368 15 * 5283 16 0161 D * 17 * 35096 18 * 19470 19 35093 * 20 35097 21 25416 21 38362 22 * 23 * 24# 25# 26# 27 0205 0202 38365 19847 38366 10133 PART NAME QTY. REMARKS SCREW, HHC 3/8 - 16 X 3 FULL THRD 1 NUT, HEX FINISH 3/8 - 16 4 NUT, HEX JAM 3/8 - 16 4 WHEEL, GUIDE 3.5 OD X .41 ID FCG 1 NUT, NYLOC 3/8 - 16 1 SHEET, REAR GUIDE .............
UNDERCARRIAGE ASSY. UNDER CARRIAGE ASSY. 14 1 10 13 3 9 2 7 2 8 6 5 3 4 11 3 12 UNDERCARRIAGE ASSEMBLY 2 PAGE 42 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
UNDERCARRIAGE ASSY. UNDER CARRIAGE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 25368 25407 15028 25379 9154 2064 2199 10136 10133 29448 25365 15414 25489 25409 PART NAME BAR, PIVOT SHAFT WHEEL, 5 X .625 X 1.5 BALL BRG COLLAR, SET 5/8 DIA BEARING, 5/8 FLANGE UHMW SCREW, HHC 3/8 - 16 X 1-3/4 ROD END, 3/8 -24 FEM RH NUT, HEX JAM 3/8 -24 WASHER, FLAT 3/8 SAE NUT, JAM 3/8 - 16 SCREW, THP 1/4 - 20 X X 1.25 RAISE-LOWER W/A UNDERCARRIAGE ASSEMBLY PLUG, 3/4 BLK PLASTIC CAP, 1-1/2 ID BLACK QTY.
HANDLE & DEPTH ADJUSTER ASSY. HANDLE & DEPTH ADJUSTER ASSY. 2 15 4 5 3 6 1 7 10 11 8 13 14 9 12 PAGE 44 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HANDLE & DEPTH ADJUSTER ASSY. HANDLE & DEPTH ADJUSTER ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 25357 25419 15503 4403 25448 25480 25446 2199 2064 9154 10136 10133 1007 9154 15081 PART NAME FRAME HANDLEBAR KNOB, COMFORT GRIP KNOB, SHIFT DEPTH ADJUST DISK SCREW PLUNGER, 1/4 - 20 X 17/32 ROD, DEPTH STOP NUT, HEX JAM 3/8 -24 ROD END, 3/8 -24 FEM RH SCREW, HHC 3/8 - 16 X 1-3/4 WASHER, FLAT 3/8 SAE NUT, NYLOC 3/8 - 16 NUT, HEX JAM 3/8 - 16 SCREW, HHC 3/8 - 16 X 3 GRIP, HANDLE QTY.
ENGINE & BLADE DRIVE ASSY. ENGINE & BLADE DRIVE ASSY. 2 3 4 1 6 5 22 7 1 2 3 23 4 8 9 11 10 18 13 12 18 14 15 20 19 17 16 21 NOTES: SWITCH MOUNTING HARDWARE 1 IS INCLUDED WITH SWITCH. PAGE 46 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
ENGINE & BLADE DRIVE ASSY. ENGINE & BLADE DRIVE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PART NO. 25378 0161 D 0161 C 0300 B 25356 25417 16052 0169 0166 A 25377 15359 1162 A 25442 0627 25380 25418 19710 25410 25487 25488 9SWG 35127 35155 PART NAME QTY. REMARKS ENGINE, 6.5 HP HONDA GX200UQXC9 (SHOWN) 1 NUT, HEX FINISH 5/16 - 18 4 WASHER, LOCK 5/16 MED 4 WASHER, FLAT 5/16 4 PULLEY, 13V412SH 1 BUSHING, PULLEY SH - 3/4 1 BELT, 3VX335 GATES/OPTIPLEX 1 SCREW, HHC 3/8 - 16 X 3.
HONDA GX200QXC9 — AIR CLEANER (CYCLONE) ASSY. AIR CLEANER (CYCLONE) ASSY. PAGE 48 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — AIR CLEANER (CYCLONE) ASSY. AIR CLEANER (CYCLONE) ASSY. NO. 1 2 3 * 4 * 5 6 * 7+ 8+ 9 10 11 12 13 14 15 16 17 PART NO. 16271ZE1000 17210ZE1505 17218ZE1821 17219733010 17230ZE1841 17232891000 17238ZE7010 17239733000 17410ZE1840 17470ZE1841 17475ZE1841 17476ZE1841 17478ZE1841 90300GB0900 90325044000 9405006000 957010602000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER (DUAL) .........................1 .............
HONDA GX200QXC9 — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 50 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 PART NO. 12209ZH8003 14100ZL0000 14410ZE1010 14431ZE1000 14451ZE1013 14568ZE1000 14711ZF1000 14721ZF1000 14731ZL0000 14751ZF1000 14771ZE1000 14773ZE1000 14781ZE1000 14791ZE1010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS SEAL, VALVE STEM 1 CAMSHAFT ASSEMBLY ........................................1 .............
HONDA GX200QXC9 — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 52 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 10 * 11 * 12 * 13 14 15 16 17 18 * 19 * 20 * 21 * 22 * 23 * 24 % 25 25 * 25 * 26 * PART NO.
HONDA GX200QXC9 — CONTROL ASSY. CONTROL ASSY. PAGE 54 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CONTROL ASSY. CONTROL ASSY. NO. 3 4 5 6 7 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 18 19 * 20 * 21 * 22 * 23 * 24 PART NO. 16500ZH8853 16551ZL0000 16555ZE1000 16561ZL0000 16562ZE1020 16571ZH8020 16574ZE1000 16575ZH8000 16576891000 16578ZE1000 16580ZH8853 16584883300 16592ZE1810 16594883010 90013883000 90015ZE5010 90114SA0000 90605230000 93500040060H 93500050160A 93500050250H 9405006000 PART NAME QTY. REMARKS CONTROL ASSEMBLY (CYCLONE) ......................1 .............
HONDA GX200QXC9 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 56 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 2 3 PART NO. 11300ZE1641 11381ZH8801 3 11381ZL0000 4 5 6+ 7 * 8 9 10 15600ZE1003 15600ZG4003 15625ZE1003 91202883005 9430108140 957010803200 961006205000 * PART NAME QTY. REMARKS COVER ASSEMBLY, CRANKCASE (U- TYPE) ......1 ............. INCLUDES ITEMS W/ * GASKET, CASE COVER (NON- ASBESTOS) .......1 ............. USE UP TO ENGINE ...............................................................................................
HONDA GX200QXC9 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 58 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 8 PART NO. 13310ZL0600 90745ZE1600 PART NAME CRANKSHAFT (Q- TYPE) KEY 4.78 X4.78 X38 QTY. 1 1 REMARKS FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 60 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 3 4 5 6 7 8 9 10 * 11 * 12 13 14 15 16 PART NO. 12000ZL0810 15510ZE1033 16506ZL0000 16531ZE1000 16541ZE1000 90131ZE1000 90451ZE1000 90601ZE1000 90602ZE1000 91001ZF1003 91202883005 91353671003 9405010000 9410106800 9425108000 957010601200 PART NAME QTY. REMARKS CYLINDER ASSEMBLY (OIL ALERT) ....................1 .............
HONDA GX200QXC9 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 62 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 * 2 * 3 4 * 5 6 7 8 9 10 11 12 13 14 15 15 PART NO. 12204ZE1306 12205ZE1315 12210ZL0000 12216ZE5300 12251ZL0003 12310ZE1841 12391ZE1000 15721ZE1840 90013883000 90043ZE1020 90047ZE1000 9430110160 9500280000 957230806000 9807956846 9807956855 PART NAME QTY. REMARKS GUIDE, VALVE OS (OPTIONAL) 1 GUIDE, EXHAUST VALVE OS (OPTIONAL) 1 CYLINDER HEAD ...................................................1 .............
HONDA GX200QXC9 — FAN COVER ASSY. FAN COVER ASSY. PAGE 64 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — FAN COVER ASSY. FAN COVER ASSY. NO. 1 3 6 7 8 9 10 11 12 13 15 PART NO. 19610ZL0000ZB 19611ZH8810 19613ZE1010 19630ZH8000 32197ZH8003 36100ZH7003 36101ZE1010 90013883000 90022888010 34150ZH7003 957010600800 PART NAME COVER, FAN *R8* BRIGHT RED PLATE, SIDE (OIL ALERT) CLAMP, CORD SHROUD SUB- HARNESS SWITCH ASSEMBLY, ENGINE STOP WIRE, STOP SWITCH 370MM BOLT, FLANGE 6 X12 (CT200) BOLT, FLANGE 6 X20 (CT200) ALERT UNIT, OIL BOLT, FLANGE 6 X8 QTY.
HONDA GX200QXC9 — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 66 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 5 7 PART NO. 13331357000 19511ZE1000 28451ZL0000 31100ZE7010 90201878003 PART NAME KEY, SPECIAL WOODRUFF 25 X18 FAN, COOLING PULLEY, STARTER FLYWHEEL, STANDARD NUT, SPECIAL 14MM QTY. 1 1 1 1 1 REMARKS FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 68 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 4 5 * 7 8 9 10 11 PART NO. 16854ZH8000 16955ZE1000 17510ZE1020ZA 17620ZH7023 17631ZH7003 91353671003 9405006000 950014500360M 9500202080 957010603000 PART NAME QTY. REMARKS RUBBER, SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK, FUEL *NH31* MCKINLEY WHITE 1 CAP, FUEL FILLER ................................................1 ............. INCLUDES ITEM W/ * GASKET, FUEL FILLER CAP 1 O- RING 13.5 X1.5 (ARAI) 1 NUT, FLANGE 6MM 2 BULK HOSE, FUEL (4.
HONDA GX200QXC9 — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 70 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 10 PART NO. 30500ZE1033 30700ZE1013 90121952000 PART NAME COIL ASSEMBLY, IGNITION CAP ASSEMBLY, NOISE SUPPRESSOR BOLT, FLANGE 6 X25 QTY. 1 1 2 REMARKS FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — MUFFLER ASSY. MUFFLER ASSY. PAGE 72 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 6 7 8 9 10 11 12 PART NO. 18310ZL0000 18315ZE1000 18320ZF1H51 18331883810 18361ZL0000 18381ZH8800 90016ZE1000 90050ZE1000 90055ZE1000 94001080000S 957010601200 PART NAME MUFFLER STAY, MUFFLER PROTECTOR, MUFFLER CAP, MUFFLER NETTING, WIRE FLANGE GASKET, MUFFLER BOLT, FLANGE 6 X13 SCREW, TAPPING 5 X8 SCREW, TAPPING 4 X6 NUT, HEX. 8MM BOLT, FLANGE 6 X12 QTY. 1 1 1 1 1 1 1 4 3 2 1 REMARKS FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — PISTON ASSY. PISTON ASSY. PAGE 74 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 6 PART NO. 13010ZL0003 13011ZL0003 13012ZL0003 13013ZL0003 13101ZL0000 13102ZL0000 13103ZL0000 13104ZL0000 13111ZE1000 132A0ZE1000 13200ZE1010 90001ZE1000 90551ZE1000 PART NAME RING SET, PISTON (STANDARD) RING SET, PISTON (OS 0.25) RING SET, PISTON (OS 0.50) RING SET, PISTON (0.75) PISTON (STANDARD) PISTON (OS 0.25) PISTON (OS 0.50) PISTON (0.75) PIN, PISTON ROD ASSEMBLY, CONNECTING (US 0.
HONDA GX200QXC9 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 76 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 PART NO. 28400ZH8013ZA 28405ZL0000ZB 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 28410ZH8003ZA 28420ZH8013 28422ZH8013 28433ZH8003 28441ZH8003 28442ZH8003 28443ZH8003 28461ZH8003 28462ZH8003 90003ZH8003 957000601800 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *R8* BRIGHT RED ......1 .............
HONDA GX200QXC9 — GASKET KIT ASSY. GASKET KIT ASSY. NO ILLUSTRATION AVAILABLE PAGE 78 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — GASKET KIT ASSY. GASKET KIT ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * PART NO. 06111ZL0000 11381ZL0000 12251ZL0003 12391ZE1000 15625ZE1003 16212ZH8800 16221ZH8800 18381ZH8800 PART NAME QTY. REMARKS GASKET KIT ..........................................................1 .............
HONDA GX200QXC9 — LABELS ASSY. LABELS ASSY. PAGE 80 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
HONDA GX200QXC9 — LABELS ASSY. LABELS ASSY. NO. 1 3 4 5 6 7 8 PART NO. 87521ZL0010 87522ZH9000 87528ZE1810 87532ZH8810 87534ZE1841 87535ZE1840 89218ZE1000 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE MARK, OIL ALERT (E) LABEL, AIR CLEANER CAUTION MARK, AIR CLEANER SALES POINT WRENCH, SPARK PLUG QTY. 1 1 1 1 1 1 1 REMARKS FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES FCG16HA SAW • OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
