OPERATION AND PARTS MANUAL SERIES MODEL MTX-80 MODEL MTX-90 TAMPING RAMMER (ROBIN EH122D46530 GASOLINE ENGINE) Revision #4 (11/06/09) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
MTX-80/MTX-90 — PROPOSITION 65 WARNING PAGE 2 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
NOTES MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — TABLE OF CONTENTS MTX-80/MTX-90 Tamping ROBIN EH122D46530 Rammer ENGINE Proposition 65 Warning ........................................... 2 Table Of Contents ................................................... 4 Parts Ordering Procedures ..................................... 5 Safety Message Alert Symbols ............................ 6-7 Rules For Safe Operation .................................... 8-9 General Information .............................................. 10 Specifications ....
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: January 1st, 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
MTX-80/MTX-90 — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.
MTX-80/MTX-90 — SAFETY MESSAGE ALERT SYMBOLS CAUTION Rotating Parts Hazards NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. CAUTION Accidental Starting Hazards ALWAYS place the ON/OFF switch in the OFF position when the rammer is not in use. CAUTION Eye and Hearing Hazards ALWAYS wear approved eye and hearing protection.
MTX-80/MTX-90 — RULES FOR SAFE OPERATION DANGER Read this manual! Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the MTX-80/MTX-90 Tamping Rammer: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MTX-80/MTX-90 — RULES FOR SAFE OPERATION ■ ALWAYS stop the engine before servicing, adding fuel and oil. ■ NEVER run engine without air filter. Severe engine may occur. ■ ALWAYS service air cleaner frequently to prevent carburetor malfunction. ■ ALWAYS check the machine for loosened threads or bolts before starting. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using rammer. ■ ALWAYS store equipment properly when it is not being used.
MTX-80/MTX-90 — GENERAL INFORMATION Definition of Tamping Rammer The Mikasa MTX-80/MTX-90 tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work. CAUTION Handle Operation Before starting operation check the lifting handle to: 1.
MTX-80/MTX-90 — SPECIFICATIONS Table 1. MTX-80/MTX-90 Rammer Specifications Model MTX-80 MTX-90 Overall Height 39.37 in. (1000 mm) 39.37 in. (1000 mm) Overall Width 14.37 in (365 mm) 14.37 in (365 mm) Over Length 31.02 in (788 mm) 31.02 in (788 mm) Shoe Size 13.4 x 11.2 in (340 x 285 mm) 13.4 x 11.2 in (340 x 285 mm) Fuel Tank Capacity 3.2 qt. (3 liters) 3.2 qt. (3 liters) Lubrication Oil Capacity 0.8 quart (0.75 liter) 0.8 quart (0.75 liter) No. of Impacts Per Second 10.6 - 11.3 11.
MTX-80/MTX-90 — CONTROLS AND COMPONENTS 3 10 2 4 1 5 9 6 11 7 12 13 8 Figure 1. MTX-80/MTX-90 Rammer Figure 1 shows the location of the controls and components for the MTX-80/MTX-90 Tamping Rammer. The functions of each control is described below: 1. Combination (Throttle) Lever – Used to adjust engine speed (rpm). Move lever forward (SLOW) to reduce engine speed, move lever back toward operator (FAST) to increase speed. Always operate the rammer at full speed (rpm). 2.
MTX-80/MTX-90 — BASIC ENGINE Figure 2. Engine Controls and Components (Robin EH-12-2D) The engine (Figure 2) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's Engine manual for instructions & details of operation and servicing. 1. Secondary Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element. 2. Choke Lever – Used when starting the engine.
MTX-80/MTX-90 — OPERATION This section is intended to assist the operator with the initial start-up of the MTX-80/MTX-90 Tamping Rammer. It extremely important that this section be read carefully before attempting to operate the rammer. DO NOT use your rammer until this section is thoroughly understood. CAUTI CAUTION Engine 1. Fill the fuel tank (Figure 4) with unleaded gasoline. At the same time, check the engine oil and make it a habit to replenish it often (Figure 5).
MTX-80/MTX-90 — OPERATION Inspection 1 . Check all nuts, bolts fasteners for tightness. Retighten as necessary. 4. Grip the starter rope handle (Figure 8) and pull it until you feel a slight resistance.Then pull sharply and quickly. Return the handle to the starter case before releasing. 2. Clean any dirt from the recoil starter and foot pedestal. Wipe the entire unit clean before operating. 3. Replace any missing or damaged Safety Operation decals. 4. Adjust height of handle.
MTX-80/MTX-90 — OPERATION Operation Stopping The Engine 1. To start the rammer tamping action, move the throttle lever (Figure 9) quickly from IDLE to the START ( ) position. DO NOT move the throttle lever slowly as this may cause damage to the clutch or spring. Normal Shutdown 1. Move throttle lever quickly from the START to IDLE position (Figure 10) and run the engine for three minutes at low speed. After the engine cools, move the throttle lever to the STOP position (Figure 11).
MTX-80/MTX-90 — MAINTENANCE Maintenance Perform the scheduled maintenance procedures as indicated: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. ■ Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. ■ Check the spring box and bellows for oil leaks. Repair or replace as needed. EVERY 200 HOURS ■ Remove the oil drain plug on foot housing (Figure 14) and drain the oil. Refill with approximately 1.7 pt. (800 cc.
MTX-80/MTX-90 — TROUBLESHOOTING GUIDE TABLE 4. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Fuel is available and spark plug ignites (compressionlow). Low compression. Ignition plug being bridge? Check ignition system.
MTX-80/MTX-90 — TROUBLESHOOTING GUIDE ENGINE TABLE 4. ENGINE TROUBLESHOOTING (continued) SYMPTOM POSSIBLE PROBLEM SOLUTION Operation not satisfactory Rotational speed fluctuates. Recoil star ter not working properly. Governor adjustment improper? Adjust governor to correct lever. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Dust in rotating par t? Clean recoil star ter assembly.
MTX-80/MTX-90—EXPLANATION OF PARTS SECTION REMARKS The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. * * Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.
MTX-80/MTX-90— SUGGESTED SPARE PARTS MTX-80/MTX-90 RAMMER 1 TO 3 UNITS WITH ROBIN EH122D46530 ENGINE Qty. P/N Description 1 ......... 956100063 ....... THROTTLE WIRE 3 ......... 366010070 ....... PRIMARY ELEMENT, AIR CLEANER 3 ......... 366010080 ....... SECONDARY ELEMENT, AIR CLEANER 1 ......... 366900020 ....... CAP, FUEL TANK W/ STRAP 2 ......... 26365012A3 .... FILTER, IN-LINE FUEL 3 ......... 0650140580 ..... SPARK PLUG 1 ......... 959300770 ....... STRAINER, FUEL TANK 1 ......... 2825011118 .....
MTX-80/MTX-90 — NAMEPLATE AND DECALS NAME PLATE AND DECALS 1 4 7 NPA-0000 ? ? ? ? ? ? ? NPA-1245 2 3 5 STOP NPA-0000 NPA-0000 6 11 MODEL SERIAL NO. A (DECAL SET) 8 MTX series RAMMER quick manual Engine Oil Use SAE 10W/30,SE or higher grade motor oil RAMMING CYLINDER OIL Use SAE 10W/30,SF or higher grade moter oil Fuel Use normal quality gasoline PAGE 22 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — NAMEPLATE AND DECALS NAME PLATE AND DECALS NO PART NO PART NAME QTY. REMARKS A 920900040 DECAL SET ..................................... 1 .......... INCLUDES ITEMS W/ # 1# DECAL: OPERATION 1 2# DECAL: AIR CLEANER 1 3# DECAL: LEVER OPERATION 1 4# DECAL: MAX SPEED 1 5# DECAL: MACHINE STOP 1 6# DECAL: EC NOISE REQ 1 7# DECAL: ANTI-VIB HANDLE 1 8 920212540 QUICK MANUAL 1 11 DECAL: NAMEPLATE ...................... 1 .......... CONTACT MQ PARTS DEPT W/ SERIAL NO.
MTX-80/MTX-90 — CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY.
MTX-80/MTX-90 — CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY. NO. 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 22 PART NO.
MTX-80/MTX-90 — CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY.
MTX-80/MTX-90 — CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY. NO. 40-1 40-2 40-3 41-1 41-2 43 44 45 46 47 48 49 51 52 53 54 55-1 55-2 56 57 58 59 60 61 62 63 64 65 66 67 68 70 74@ 75-1 75-2 75-3 76 77 78 79 80 81 82 101 106 106 106 106 111 PART NO.
MTX-80/MTX-90 — GUIDE CYLINDER AND SPRING ASSY. GUIDE CYLINDER AND SPRING ASSY. 2 32 1 20 3 9 22 21 24 12 8 14 27 18 17 28 25 29 26 13 15 16 23 29 9 27 28 25 26 7 4 6 5-2 5-1 24 31 51 30 52 53 PAGE 28 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — GUIDE CYLINDER AND SPRING ASSY. GUIDE CYLINDER AND SPRING ASSY. NO. PART NO. PART NAME QTY.
MTX-80/MTX-90 — FOOT ASSY. FOOT ASSY. 2 3 6 2 3 1 4 5 PAGE 30 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — FOOT ASSY. FOOT ASSY. NO. PART NO. 1 366910020 2 022711214 3 030212300 4 009110034 5 009110035 6 363343390 PART NAME FOOT ASSY 285 NYLON NUT M12 WASHER, LOCK M12 BOLT, SQUARE NECK 12X65 BOLT, SQUARE NECK 12X95 GRIP HANDLEBAR ON NUT M10 7 QTY. 1 4 4 2 2 1 REMARKS MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — TANK AND HANDLE ASSY. TANK AND HANDLE ASSY. 9 10 54 51 53 56 22 14 15 16 A 18 17 3 55 12 11-2 11-1 4-1 4-2 6 43 5 41 42 12 11-2 11-1 13 7 20 19 A 43 102 11-2 11-1 101 102 20 103 4-2 4-1 102 104 41 42 106 1 102 2-2 2-1 PAGE 32 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — TANK AND HANDLE ASSY. TANK AND HANDLE ASSY. NO. PART NO.
MTX-80/MTX-90 — COMBINATION LEVER ASSY. COMBINATION LEVER ASSY. A 4 7 8 3 7 11 1 13 10 2 5 14 11 12 6 9 PAGE 34 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — COMBINATION LEVER ASSY. COMBINATION LEVER ASSY. NO. PART NO. PART NAME QTY. REMARKS A 366900042 LEVER AY W/T, WIRE ............................. 1 ......... INCLUDES ITEMS W/@ ............................................................................. REPLACES 366900040 1@$ 366349430 FUEL COCK............................................ 1 ......... REPLACES 366346260 2@$ 366010310 LEVER .................................................... 1 .........
MTX-80/MTX-90 — TOOLS TOOLS PAGE 36 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
MTX-80/MTX-90 — TOOLS TOOLS NO. 1 2 3 4 PART NO. 981010400 983010060 983910090 009110044 5 6 7 983910020 983010040 983910010 PART NAME CLUTCH PULLER A CLUTCH MOUNTER PISTON ROD HOLDER SOCKET HEAD BOLT 8X50 (FULL THREAD) CRANK GEAR REMOVER CLUTCH PULLER B SPRING CYLINDER REMOVER PISTON END REMOVER QTY. 1 1 1 REMARKS 2 1 1 1 MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — CRANKCASE ASSY. CRANKCASE ASSY. 10 40 50 30 700 830 294 210 295 298 230 860 297 265 75 270 280 90 260 250 80 220 300 NOTE USE LIQUID GASKET FOR CYLINDER AND INSULATOR GASKET. PAGE 38 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — CRANKCASE ASSY. CRANKCASE ASSY. NO. 10 30# 40# 50# 75# 80 90 210 220$ 230$ 250 260 265$ 270 280 294 295 297 298 300 700 830 860 PART NO. 2521030141 0440250150 0600250100 0310060020 0440080010 0401140030 0211140020 2521110301 0440250160 0600250010 2274500301 2054190103 0108100030 2686360301 X213160020 2521700201 2521700101 0011308160 0011308160 0130060200 0310060020 2681620103 0011306160 PART NAME QTY. REMARKS CRANKCASE CP ....................................... 1 ...............
ROBIN EH122D46530 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. 710 680 MTX-80/MTX-90 — EH12-2D850 ROBIN ENGINE— CRANKSHAFT AND PISTON 690 910 726 723 722 721 720 724 690 725 230 610 20 26 20 220 95 73 72 230 70 220 95 73 72 630 71 240 260 240 60 210 900 901 60 620 CYLINDER HEAD REFERENCE ONLY 90 80 CRANKCASE REFERENCE ONLY PAGE 40 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. PART NO.
ROBIN EH122D46530 ENGINE — CRANKSHAFT, PISTON ASSY. CRANKSHAFT, PISTON ASSY. 370 360 380 380 350 310 60 50 CRANKCASE REFERENCE ONLY 70 10 40 320 PAGE 42 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — CRANKSHAFT, PISTON ASSY. CRANKSHAFT, PISTON ASSY. NO. 10 40 40 40 50 60 70 310 320# 350 360 360 360 370 370 370 380 PART NO. 2682190501 0230250110 0230250120 0230250130 0021814000 0032014000 0323030010 2522250120 2362300103 2682330103 26823401H3 26823402H3 26823403H3 2522350117 2522350217 2522350317 2152500403 PART NAME QTY. REMARKS CRANK SHAFT CP 1 SPACER T=0.6 1 SPACER T=0.8 1 SPACER T=1.0 1 NUT 1 SPRING WASHER 1 WOODRUFF KEY 1 CONNECTING ROD ASSY .......... 1 ................
ROBIN EH122D46530 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. CRANKCASE REFERENCE ONLY 10 36 34 38 50 PAGE 44 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE —CAMSHAFT ASSY. CAMSHAFT ASSY. NO. PART NO. 10 2533170111 34# 2273860123 35# 2273640113 36# 0051904100 37# 0031522000 38# 2273870103 50 2393330113 PART NAME QTY. REMARKS CAMSHAFT CP .................................... 1 ................. INCLUDES ITEMS W/ # PIN (SPRING) 1 RELEASE LEVER 1 SPRING PIN 1 SNAP RING 1 RETURN SPRING 1 TAPPET 2 MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. 10 40 95 90 220 20 249 207 205 206 201 205 211 208 203 202 204 200 PAGE 46 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 10 20 40 90 95 200 201# 202# 203# 204# 205# 206# 207# 208# 211# 220 249# PART NO. 2525165221 920100240 0011406550 2685270303 0110060140 2685020130 2705011508 2695012008 2825011118 2615010008 2705012508 2275013108 2275013508 2705026108 2685014518 0110060010 2275015208 PART NAME QTY. REMARKS BLOWER HOUSING CP 1 DECAL, (M-MARK) 1 BOLT AND WASHER ASSY 6X55 4 HEAD COVER 1 FLANGE BOLT 2 RECOIL STARTER ASSY ..................... 1 .........
ROBIN EH122D46530 ENGINE — CARBURETOR ASSY. 210 CARBURETOR ASSY. 918 947 946 945 948 905 949 903 929 917 907 902 921 909 910 912 919 917 904 NOT SOLD SEPARATELY 943 900 927 925 906 916 908 920 926 915 911 914 901 916 PAGE 48 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. PART NO.
ROBIN EH122D46530 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. 555 590 556 552 567 500 550 CYLINDER HEAD REFERENCE ONLY 528 565 563 560 570 530 PAGE 50 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 500 528 530 550 552 555 556 560 563 565 567 570 590 PART NO. 2683300413 2683660103 2843810103 1573500103 2843650103 2823590103 0011406400 1066500203 0119060090 2843310103 0100050110 0176050010 0023806000 PART NAME INTAKE PIPE PLATE INTAKE PIPE GASKET, INSULATOR GASKET (INTAKE) GASKET, INSULATOR BOLT AND WASHER ASSY GASKET (CARB.) BOLT (SOCKET HEAD) INTAKE FLANGE CP BOLT M5X0.8X70L SELF LOCK NUT FLANGE NUT QTY.
ROBIN EH122D46530 ENGINE — MUFFLER ASSY. MUFFLER ASSY. 366 310 340 345 340 CYLINDER HEAD REFERENCE ONLY 350 330 365 CRANKCASE REFERENCE ONLY PAGE 52 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — MUFFLER ASSY. MUFFLER NO. 310 330 340 345 350 365 366 ASSY. PART NO. 2523040111 2523700111 2533520103 2523650123 0176080020 0011308160 0011408160 PART NAME MUFFLER CP BRACKET CP GASKET, MUFFLER SPACER, EXHAUST SELF LOCK NUT BOLT AND WASHER ASSY BOLT AND WASHER 8X16 QTY. 1 1 2 1 2 2 2 REMARKS MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — GOVERNOR ASSY. GOVERNOR ASSY. 40 30 20 80 280 26 50 200 70 210 230 240 60 710 10 235 290 231 715 293 PAGE 54 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — GOVERNOR ASSY. GOVERNOR ASSY. NO. 10 20 26 30 40 50 60 70 80 200 210 230 231 235 240 280 290 293 710 715 716 PART NO. 2524230303 2274220103 0031108000 2544270101 2544280103 0031306000 0011406300 0186060020 2524250323 2524340230 0116040030 0043105250 0043104250 2684500113 0021705000 2264310101 2684420201 0110060030 2524280111 0011308160 0110060030 PART NAME QTY.
ROBIN EH122D46530 ENGINE — FLYWHEEL IGNITION ASSY. FLYWHEEL IGNITION ASSY. 11 30 95 110 10 90 70 100 11 10 PAGE 56 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — FLYWHEEL IGNITION ASSY. FLYWHEEL IGNITION ASSY. NO. PART NO. 10 2687933201 11 2697943011 30 0011406250 70 0150040090 90 0566000250 95 0659000010 100 0650140580 110 2307510113 PART NAME FLYWHEEL CP IGNITION COIL CP BOLT AND WASHER ASSY TAPPING SCREW CLAMP PLUG TERMINAL SPARK PLUG BR6ES SPARK PLUG CAP QTY. 1 1 2 2 1 1 1 1 REMARKS MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — LABELS AND ACCESSORIES LABELS AND ACCESSORIES LABELS 100 101 102 103 ACCESSORIES 201 202 PAGE 58 — MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
ROBIN EH122D46530 ENGINE — LABELS AND ACCESSORIES LABELS AND ACCESSORIES NO. PART NO. 100 0732004450 101 0732004520 102 0732003900 103 0732005020 201 0830000010 202 2267510103 PART NAME LABEL, CAUTION LABEL, OIL CAUTION LABEL, WARNING LABEL CHOKE COIL SPRING CLAMP QTY. 1 1 1 1 1 1 REMARKS MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTES MTX-80/MTX-90 — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
