Specifications

Generator Maintenance, Inspection and Repair Services Bid Number 6000001312
California Department of Corrections and Rehabilitation (CDCR) Exhibit A
SCOPE OF WORK
Page 3 of 18
e) Turbocharger
Inspect turbocharger for proper end play and radial clearance of turbine
wheel.
Inspect for oil leakage and exhaust leakage.
Check for unusual noises and proper operation.
Inspect turbocharger for proper end play of the rotating assembly.
f) Turbocharger Components
Inspect and record condition of compressor
Inspect and record condition of turbine.
Inspect and record presence of lube oil leaks.
g) Valve Adjustment
Check and adjust valves. Note findings.
h) Valve Rotators
Inspect to insure proper valve rotation.
2. COOLING SYSTEM
a) Radiator/Heat Exchanger
Visual inspection for leaks, damage and debris.
Check radiator louvers for proper operation.
b) Coolant
Visual inspection for correct level and condition of coolant (rust, oil,
contaminants).
Check coolant conditioner concentration and temperature protection.
Check filler cap gasket and sealing surfaces.
Take a coolant sample for laboratory analysis.
c) Hoses and Connections
Visual inspection of all hoses (for deterioration).
Check tightness of all connections.
d) Fan Drive Pulley and Fan
Check for loose or worn pulleys and lube fan drive bearing.
Check fan operation and clearance.
e) Fan Belts
Inspect for wear and/or deterioration.
Check tension and adjust as necessary.
Check fan clearance and operation.
f) Jacket Water Heater
Inspect for proper operation.
Check thermostat setting for proper coolant temperature.
Bid 6000001312
State of California
11/14/2013 2:35 PM
p. 33