Specifications

DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV. #3 (11/30/01) — PAGE 53
DCA-45SSIU2 — MAINTENANCE
CAUTION :
Allow engine to cool when flushing out
radiator. Flushing the radiator while hot will
damage radiator.
Flushing Out Radiator and Replacing Coolant
Open both cocks located at the crankcase side and at
the lower part of the radiator and drain coolant. Open
the radiator cap while draining. Remove the overflow
tank and drain.
Check hoses for softening and kinks. Check clamps for
signs of leakage.
Flush the radiator by running clean tap water through
radiator until signs of rust and dirt are removed. DO
NOT clean radiator core with any objects, such as a
screwdriver.
Tighten both cocks and replace the overflow tank.
Replace with coolant (see page 44, Table 14 for mixture).
Close radiator cap tightly.
Air Cleaner with Dust Indicator
This indocator is attached to the air cleaner. When the air
cleaner element is clogged, air intake restriction becomes
greather and the dust indicator signal turns into a red meaning
ththe element needs changing. After changing the air
element, press the dust indicator button to reset the indicator.