Specifications

DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV. #3 (11/30/01) — PAGE 29
DCA-45SSIU2 — CONTROL PANEL
The definitions below describe the controls and functions of
the DCA-45SSIU2 "
Control Panel Control Panel
Control Panel Control Panel
Control Panel " (Figure 8).
1. Frequency Meter – Indicates the output frequency in
hertz (Hz). Normally 63 Hz ±0.5 Hz.
2. Voltage Regulator Control – Allows manual
adjustment of the generator’s output voltage.
3. Voltmeter Change-Over Switch – This switch allows
the AC voltmeter to indicate phase to phase voltage
between any two phases of the output terminals or to
be switched off.
4. Ammeter Change-Over Switch – This switch allows
the AC ammeter to indicate the current flowing to the
load connected to any phase of the ouput terminals, or
to be switched off.
5. AC Ammeter – Indicates the amount of current the
load is drawing from the generator.
6. AC Voltmeter – Indicates the single phase output
voltage present at the output terminals.
7. Main Circuit Breaker – This three-pole, 110 amp main
breaker is provided to protect the UVW voltage output
terminals from overload.