Specifications

PAGE 24 —DA7000 SERIES A.C. GENERATORS— OPERATION AND PARTS MANUAL — REV. #4 (08/07/09)
DA7000 SERIES GENERATORS—SETUP
Figure 8. Engine Oil Dipstick (Removal)
3. Insert and remove the dipstick , check the oil level shown on
the dipstick (Figure 9).
Before Starting
1. Read safety instructions at the
beginning of manual.
2. Clean the generator, removing dirt
and dust, particularly the engine
cooling air inlet, and air filter.
3. Check fastening nuts and bolts for tightness.
Engine Oil Check
1. To check the engine oil level, place the generator on secure
level ground with the engine stopped.
2. Remove the dipstick (Figure 8) and wipe clean.
epyTliO.5elbaT
nosaeS erutarepmeT epyTliO
remmuS rehgiHroC°52 03-W01EAS
llaF/gnirpS C°01~C°52 02/03-W01EAS
retniW rewoLroC°0 01-W01EAS
4. If the oil level is low (Figure 10), remove the oil filler cap and
add new oil. Fill to the prescribe level with recommended
oil type (Table 5). Maximum oil capacity is 2.64 quarts (2.5
liters)
Figure 9. Engine Oil Dipstick
Figure 10. Adding Engine Oil
NOTE
When adding engine oil DO NOT
overfill.