Owner manual

PAGE 18 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)
)
STOW CS4030 SAW — OPERATION AND SAFETY DECALS
Machine Safety Decals
The STOW CS4030 SAW is equipped with a number of operation and safety decals. These decals are provided for operator safety
and maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.
Figure 3. STOW CS4030 SAW Decals
P/N 37744
P/N 37161
P/N 36092
P/N 36090
WARNING
Only operate machine in well-
ventilated areas.
Only qualified personnel should
install, use, or service this equipment.
DO NOT inhale exhaust fumes.
Inhaling exhaust fumes can result
in severe injury or death.
Inhaling exhaust fumes can result
in
severe injury or death.
DANGEROUS
FUMES
P/N 36090
P/N 36092
DIESEL FUEL can cause
fire or explosion.
Stop engine before fueling
Keep cigarettes, sparks
and flame away.
WARNING
P/N 37161
P/N 37515
MODEL
SERIAL NO.
P/N 36099 (ISO Blue)
KEEP HANDS
CLEAR
WARNING!
KEEP FEET
CLEAR
WARNING!
When Larger Blade and Guard
is Installed, Belt Drive MUST
Be Changed to Proper Size.
See Owners Manual.
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
CAUTION
FAILURE TO COMPLY WITH THE C C AH
JADV EEE AV EEA OIEJGGVCBVVZ
P/N 25249-001
P/N 23330-001
P/N 25250-001
P/N 11246
(Sheet-Intl. Stds)
R
O
T
A
T
I
O
N
R
O
T
A
T
I
O
N
P/N 25491
P/N 25678
P/N 22122-001
CONTACT
SERVICE
DEPARTMENT
P/N 13118
P/N 606004
P/N 20525
DO NOT OPERATE SAW
WITHOUT PROPER TRAINING
& FULL UNDERSTANDING
OF THE OWNERS MANUAL
HEARING
PROTECTION
KEEP ALL
GUARDS IN
PLACE
EYE OR FACE
PROTECTION
HEAD
PROTECTION
RESPIRATOR
TO PREVENT SERIOUS INJURY
WHEN OPERATING THIS MACHINE
ALWAYS WEAR SAFETY APPROVED
MASONRY AND CONCRETE
SAW MANUFACTURING INSTITUTE
SMI
WARNING
P/N 35137
P/N 11912
P/N 21302
Engine exhaust and some of
its constituents, andsome dust created
of California to cause cancer, birth
defects and other reproductive harm.
by power sanding, sawing, grinding,
drillingandother construction activities
contains chemicals known to the State
Some examples ofthese chemicals are:
Leadfromlead-based paints.
Crystallinesilicafrom bricks.
Cementandother masonry products.
Arsenicand chromiumfromchemically
treatedlumber.
Your risk from these exposures varies,
dependingonhowoften youdothistype
of work. To reduce your exposure to
these chemicals: work in aALWAYS
well ventilated area, and work with
approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
CHECKHOT
BELT DRIVE
LUBRICATION
P/N M600002
PATENT PENDING
P/N 37540
P/N 37540
API SERVICE CI- 4 PLUS, CI- 4, CH- 4,
CG- 4, CF- 4, CF/SL/SJ
USE 15W- 40 ENGINE OIL