PARTS AND OPERATION MANUAL PARTS AND OPERATION MANUAL Table of Contents MQ POWER DUELWELDTM WELDER/AC GENERATOR © COPYRIGHT 2001, MULTIQUIP INC. MODEL BLW-400SSW S/N 5308765~ Revision #1(06/15/01) MULTIQUIP INC. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT: 310-537-3700 800-421-1244 800-835-2551 FAX: 310-537-3927 FAX: 310-638-8046 E-mail:mq@multiquip.com • www:multiquip.
Table of Contents PAGE 2 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800/427-1244 or 310/537-3700 FAX: 800/672-7877 or 310/637-3284 SERVICE DEPARTMENT 800/835-2551 or 310/537-3700 FAX: 310/638-8046 WARRANTY DEPARTMENT 800/835-2551 or 310/537-3700 FAX: 310/638-8046 MAIN 800/421-1244 or 310/537-3700 FAX: 310/537-3927 BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
TABLE OF CONTENTS Here’s How to Get Help........................................... 3 Parts Ordering Procedures ..................................... 5 Rules for Safe Operation ..................................... 6-7 Operation and Safety Decals ............................... 8-9 Specifications ........................................................ 10 General Information .............................................. 11 Dimensions ...........................................................
Table of Contents PARTS ORDERING PROCEDURES ■ ■ ■ ■ ■ ■ ■ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: • • • • UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* • • Airborne Express* Truck or parcel post *Normally shipped the
Table of Contents RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the BLW-400SSW Welder/AC Generator: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
Table of Contents RULES FOR SAFE OPERATION CAUTION: CAUTION: This welder/AC generator is a source of providing LETHAL high voltages. Never permit unqualified personnel-especially children to operate the welder/AC generator. ■ This welder/AC generator is equipped with a ground terminal for your protection. Always complete the grounding path from the welder/AC generator to an external grounding source.
Table of Contents OPERATION AND SAFETY DECALS PAGE 8 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents OPERATION AND SAFETY DECALS P/N DCL160 BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents BLW-400SSW — SPECIFICATIONS Table 1. Specifications Welder Specifications Model BLW-400SSW Type Brushless, revolving, field type generator Armature Connection Single Dual Rated Current 350A 175A Rated Voltage 34V 27V Range of Current 70~400A 35~200A Generator Specifications Frequency 60 Hz Speed 3600 rpm Max. Output 14kW Rated Output 12.5kW Voltage 120/240 V Engine Specifications Model KUBOTA V 1205 Type 4 Cycle, water-cooled, in line, overhead valve No.
Table of Contents BLW-400SSW — GENERAL INFORMATION BLW-400SSW FAMILIARIZATION Generator The MQ Power Model BLW-400 welder/AC generator can provide 400 amps of welding current with a single operator or 200 amps of welding current simultaneously with two operators. When used as a welder/AC generator it can provide a maximum of 6,000 watts of power.
Table of Contents BLW-400SSW — DIMENSIONS Figure 1. BLW-400SSW Dimensions PAGE 12 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents BLW-400SSW — TRAILER-SAFETY GUIDELINES Frame Length - This measurement is from the ball hitch to the rear bumper (reflector). ALWAYS make sure the trailer is in good 5. Frame Width - This measurement is from fender to operating condition. Check the tires for fender. proper inflation and wear. Also check the 6. Jack Stand - Trailer support device with maximum wheel lug nuts for proper tightness. pound requirement from the tongue of the trailer. 7.
Table of Contents BLW-400SSW — TRAILER-SPECIFICATIONS Table 2. Specifications MOD EL APPLIC ATION FU E L C E LL B R AK E SYSTEM GVWR FR AME LEN GTH FR AME WID TH JAC K STAN D TR LR -10-15 TLG-12, D C A15, TLW-300 NO NO 1900LB S 96" 50" 800LB . FULL TILT WHEEL TR LR -10X TLG-12, D C A15, TLW-300 NO NO 1900LB S 96" 50" 800LB . FULL TILT WHEEL TR LR -10XF TLG-12, D C A15, TLW-300 51 GAL NO 1900LB S 96" 50" 800LB .
Table of Contents BLW-400SSW — TRAILER-SPECIFICATIONS Table 2. Specifications (Con't) MODEL COUPLER TIRES WHEELS AXLE HUBS SUSPENSION ELECTRICAL TRLR-10-15W 2" B A LL C LA S S 2 ADJUSTABLE 175-13C 13"X4.50" 2200# 2X 2 5 LUG 3 LE A F 4 WIRE LOOM W/ 4 POLE FLAT TRLR-10X 2" B A LL C LA S S 2 ADJUSTABLE 175-13C 13"X4.5" 2200#2X 2 5 LUG 3 LE A F 4 POLE FLAT TRLR-10XF 2" B A LL C LA S S 2 ADJUSTABLE 175-13C 13"X4.
Table of Contents BLW-400SSW —TRAILER SAFETY GUIDELINES Brakes If your trailer has a braking system, the brakes should be inspected the first 200 miles of operation. This will allow the brake shoes and drums to seat properly. After the first 200 mile interval, inspect the brakes every 3,000 miles. If driving over rough terrain, inspect the brakes more frequently. Electric Brakes Electrically actuated brakes (Figure 2) are similar to hydraulic brakes.
Table of Contents BLW-400SSW —TRAILER SAFETY GUIDELINES Tires/Wheels/Lug Nuts Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched. CAUTION: DO NOT attempt to repair or modify a wheel. DO NOT install in inner tube to correct a leak through the rim.
Table of Contents BLW-400SSW —TRAILER SAFETY GUIDELINES Table 4. Suspension Torque Requirements Item Torque (Ft.-Lbs.) 3/8" U-BOLT MIN-30 MAX-35 7/16" U-BOLT MIN-45 MAX-60 1/2" U-BOLT MIN-45 MAX-60 SHACKLE BOLT SNUG FIT ONLY. PARTS MUST ROTATE FREELY. SPRING EYE BOLT LOCKING NUTS OR COTTER PINS ARE PROVIDED TO RETAIN NUT-BOLT ASSEMBLY.
Table of Contents BLW-400SSW —TRAILER-WIRING DIAGRAM BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents BLW-400SSW —TRAILER-BRAKE TROUBLESHOOTING Table 6. Electric Brake Troubleshooting Symptom Possible Cause Solution No Brakes or Intermittent Brakes Any open circuits or broken wires? Find and correct. Any short circuits? Find and correct. Faulty controller? Test and correct. Any loose connections? Find and repair. Ground wire secure? Find and secure. Grease or oil on magnets or linings? Clean or replace. Connections corroded? Clean and correct cause of corrosion.
Table of Contents BLW-400SSW —TOWING ■ ALWAYS attach trailer's safety chain to bumper of towing vehicle. Towing Safety Precautions CAUTION : Check with your county or state safety towing regulations department before towing your generator. Vehicle towing codes and regulations can vary from state to state. ■ ALWAYS make sure the vehicle and trailer directional, backup, brake, and trailer lights are connected and are working properly.
Table of Contents BLW-400SSW — CONTROLS AND INDICATORS Figure 6. Controls and Indicators PAGE 22 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents BLW-400SSW — CONTROLS AND INDICATORS Figure 6 shows the location of the controls and indicators. The functions of each control or indicator is described below. 1. DC Current Selector/Single-Use to select current when using welder for single operator. 2. Current Range Selector- Use to select for single or dual welding operators. 3. DC Current Selector/Dual- Use to select current when using welder for dual operators. 4.
Table of Contents BLW-400SSW — OUTPUT TERMINAL OVERVIEW Figure 7. Output Terminal Panel 120 Volt Receptacle One GFCI Duplex Nema 5-20R (120V, 20 Amp) receptacle is provided on the output terminal. This receptacle can be used anytime the generator is in operation. The receptacle is controlled by the circuit breaker located on the control panel. Figure 8. Duplex Receptacle Detail The reset button is for the GFCI when the circuit is tripped.
Table of Contents BLW-400SSW — OUTPUT TERMINAL OVERVIEW Output Terminal Panel Available Voltages The BLW-400SSW is a single phase generator only. It is able to supply both 120 volt and 240 volt. Maximum Amps The BLW-400SSW can provide 41.7 amps at 120 or 240 volts. Do not exceed the maximum amps! 120V Hard Wire Hookup 240V Hard Wire Hookup The output terminal panel, when suppling single phase 120 volts, will provide two circuits available at 41.7 amps with any two wires plus the ground.
Table of Contents BLW-400SSW — INSTALLATION Outdoor Installation Indoor Installation Install the welder/AC generator in a location where it will not be exposed to rain or sunshine. Make sure the Welder/AC generator is on secure level ground so it cannot slide or shift around. Also install the welder/AC generator so the exhaust will not be discharged in the direction of nearby homes. Exhaust gases from diesel engines are extremely poisonous.
Table of Contents BLW-400SSW — PRE-SETUP General Inspection Prior to Operation Circuit Breakers The BLW-400SSW utilizes a welder/AC generator that has been thoroughly inspected and accepted prior to shipment from the factory. However, be sure to check for damaged parts or components, or loose nuts and bolts, which could have occurred in transit. To protect the welder/AC generator from an overload, a 3-pole, 53 amp, main circuit breaker is provided.
Table of Contents BLW-400SSW — PRE-SETUP Lubrication Oil Fuel Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill. Make sure the welder/AC generator is level. With the dipstick inserted all the way, but without being screw into the filler hole, verify that the oil level is maintained between the two notches (Figure 12) on the dipstick. See Table 8 for proper selection of engine oil. Fill the fuel tank with clean diesel fuel. Do not fill the tank beyond capacity.
Table of Contents BLW-400SSW — PRE-SETUP CAUTION : When adding coolant or antifreeze to the radiator, do not remove the radiator cap until the unit has completely cooled. Day-to-day addition of coolant or antifreeze is done from the reserve tank. See Table 9 for engine, radiator and reserve tank coolant capacities. Make sure the coolant level in the reserve tank is always between the "H" and the "L" markings.
Table of Contents BLW-400SSW — LOAD APPLICATION Single Phase Load Always be sure to check the nameplate on the welder/AC generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the welder/AC generator for operating the equipment. Generally, the wattage listed on the nameplate of the equipment is its rated output.
Table of Contents BLW-400SSW— WELDER OPERATING INSTRUCTIONS Welding Cables and Polarities Connect the welding cables (Figure 14) to the welder's output terminals located on the control panel. The output terminals have (+) and (-) polarities. Select the appropriate polarities according to the application (See Welding Applications, Table 13). NOTE ALWAYS attach terminal connectors at the end of each cable. NEVER connect exposed or frayed wires (Figure 15) directly to the terminals.
Table of Contents BLW-400SSW— WELDER OPERATING INSTRUCTIONS Duty Cycle The welder is rated at 100% duty cycle at 350 amps. However, the duty cycle depends upon the welding current and number of operators. Select the appropriate duty cycle from Table 14 to prevent overload. Table 14.
Table of Contents BLW-400SSW— START-UP INSTRUCTIONS START UP INSTRUCTIONS 1. Check the oil level before starting the engine. Replenish if necessary. Use specified oil as indicated on page 28, Table 8. 2. Check the coolant level in the radiator and subtank. Always maintain the antifreeze level between the ‘Full’ and ‘Low’ level. Fasten the radiator cap securely. CAUTION: The engine's exhaust contains harmful emissions. ALWAYS ventilate the exhaust when operating inside tunnels, excavations or buildings.
Table of Contents BLW-400SSW— START-UP INSTRUCTIONS 8. Turn the Automatic Idle Control switch to the ‘OFF’ position (Figure 21). CAUTION: NEVER turn the key to the “START” position while the engine is running. Figure 21. Automatic Idle Control Switch in ‘OFF’ position 9. Insert the key into the starter switch and turn the ‘Run’ position (Figure 22). The oil pressure light will temporarily turn on. Figure 22. Starter Switch to ‘RUN’ position 10. Turn the key further to the ‘Heat’ position.
Table of Contents BLW-400SSW — SHUTDOWN INSTRUCTIONS Shutdown Emergency Shut-Down 1. Switch the circuit breakers to ‘OFF’ position (Figure 28. To stop during an emergency, turn the key switch to ‘STOP’ position. Figure 28. Main and receptacle circuit breakers 2. Switch the Idle Control switch to ‘OFF’ position (Figure 29). Let engine run for 5 minutes in idle mode. CAUTION : Do not shut down the welder/generator set by shutting off the engine except in an emergency. Figure 29. Idle Control Switch 3.
Table of Contents BLW-400SSW — MAINTENANCE General Inspection Cleaning the Fuel Strainer At least daily or prior to each use, the welder/AC generator should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners. Also check for fuel or oil leaks. Clean the fuel strainer if it contains dust or water. Remove dust or water in the strainer cap and wash it in gasoline. Securely fasten the fuel strainer cap so that fuel will not leak.
Table of Contents BLW-400SSW — PREPARATION FOR LONG - TERM STORAGE Generator Storage For storage of the welder/AC generator for over 30 days, the following is required: ! Drain the fuel tank completely. ! Run the engine until all the gasoline is completely consumed. ! Completely drain the oil from the crankcase and refill with fresh oil. ! Disconnect the negative battery cable from the battery. ! Clean all external parts of the welder/AC generator with a cloth.
Table of Contents BLW-400SSW —GENERATOR WIRING DIAGRAM SEE NEXT PAGE PAGE 38 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents BLW-400SSW —GENERATOR WIRING DIAGRAM SEE PREVIOUS PAGE BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents BLW-400SSW —ENGINE WIRING DIAGRAM PAGE 40 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents BLW-400SSW —ENGINE WIRING DIAGRAM BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents BLW-400SSW — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 15) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 15.
Table of Contents BLW-400SSW — TROUBLESHOOTING (ENGINE) TABLE 15. ENGINE TROUBLESHOOTING (PART 2) SYMPTOM Engine revolution is not smooth. Either white or blue exhaust gas is observed. Either black or dark gray exhaust gas is observed. Deficient output. POSSIBLE PROBLEM SOLUTION Fuel filter clogged or dirty? Clean or change. Air cleaner clogged? Clean or change. Fuel leak due to loose injection pipe retaining nut? Tighten nut. Injection pump malfunctioning? Repair or replace.
Table of Contents BLW-400SSW — TROUBLESHOOTING (ENGINE) TABLBLW-400SSW E 15. ENGINE TROUBL— ESH OOTING (PART 3) TROUBLESHOOTING SYMPTOM Engine fails to start and starter rotates. Engine starts and remains at low speed. Starter does not run. POSSIBLE PROBLEM SOLUTION Broken pre-heat circuit? Check pre-heat circuit. No fuel? Add fuel. Defective wiring? Check wiring. Clogged fuel strainer? Clean or replace. Clogged air cleaner? Clean or replace. Disconnected wiring? Check and repair wiring.
Table of Contents BLW-400SSW — TROUBLESHOOTING (WELDER) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Welder Troubleshooting (Table 16) information shown below and on the proceeding page. If the problem cannot be remedied, consult our company's business office or service plant. TABLE 16.
Table of Contents EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
Table of Contents BLW-400SSW — SUGGESTED SPARE PARTS BLW-400SSW W/KUBOTA V1205 DIESEL ENGINE 1 TO 3 UNITS Qty. P/N Description 1 ......... 0601840073 ..... RHEOSTAT VOLTAGE REGULATOR 1 ......... 0601840103 ..... KNOB, RHEOSTAT 1 ......... 1628672940 ..... RADIATOR HOSE, UPPER 1 ......... 1628672850 ..... RADIATOR HOSE, LOWER 1 ......... 1624173350 ..... RADIATOR HOSE, BYPASS ...... UP TO S/N5427529 1 ......... 1G32172851 .... RADIATOR HOSE, LOWER ....... S/N5427530~ 5 ......... 1627132090 .....
Table of Contents BLW-400SSW --- GENERATOR ASSY. GENERATOR ASSY. PAGE 48 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Generator Table of Contents BLW-400SSW ---GENERATOR ASSY. GENERATOR ASSY. NO. PART NO.
Table of Contents BLW-400SSW --- GENERATOR ASSY. GENERATOR ASSY. PAGE 50 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Generator Table of Contents BLW-400SSW ---GENERATOR ASSY. GENERATOR ASSY. NO. PART NO. 30 31 32 33 34 35 36 Full View 37 38 39 40 41 42 43 W1961324003 0017106016 0010010035 0040010000 031110160 7961332003 0010106030 952404470 7961320613 012212030 0805083904 0207001000 0601831052 0021303006 ITEM QTY. REMARKS GROMMET 2 HEX.HEAD BOLT 8 HEX. HEAD BOLT 8 LOCK WASHER 8 PLAIN WASHER .................................... 8 ...........REPLACES 0041210000 COVER 1 HEX. HEAD BOLT 1 PLAIN WASHER ..................
Table of Contents BLW-400SSW --- CONTROL BOX ASSY. CONTROL BOX ASSY. PAGE 52 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents BLW-400SSW --- CONTROL BOX ASSY. Full View CONTROL BOX ASSY. NO. PART NO. ITEM QTY. REMARKS 1 7961822703 CONTROL PANEL 1 2 0021506030 MACHINE SCREW 2 3 0601803043 CURRENT RANGE SELECTOR ................ 1 ......... SK2022L 4 0017106016 HEX. HEAD BOLT 4 5 0601840065 CURRENT REGULATOR ............................ 2 ......... RV24YN20SB10K OHM 6 0601840103 KNOB 1 7 0601823204 RECTIFIER ................................................ 1 .........
Table of Contents BLW-400SSW --- CONTROL BOX ASSY. CONTROL BOX ASSY. PAGE 54 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents BLW-400SSW --- CONTROL BOX ASSY. CONTROL BOX ASSY. NO. PART NO. 0027103006 36 0601811034 37 0601812597 38 0601811031 39 0601811033 40 0027104012 030004000 41 0601805874 42 4341817004 43 0027104030 44 0601815171 45 7561860104 46 D5235000004 47 014208020 48 0039308000 49 0040008000 50 0041408000 51 011606025 ITEM QTY. REMARKS MACHINE SCREW 6 RECEPTACLE, AUX. POWER ................... 1 ......... CS6369 125/250V50A RECEPTACLE, AUX. POWER ................... 1 .........
Table of Contents BLW-400SSW --- CONTROL PARTS ASSY. (PART 1) CONTROL PARTS ASSY. (PART 1) PAGE 56 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Control Parts (Part 1) Table of Contents BLW-400SSW --- CONTROL PARTS ASSY. (PART 1) Full View CONTROL PARTS ASSY. (PART 1) NO. PART NO. ITEM QTY. REMARKS 1 8830200900 SLOW DOWN ................................. 1 ........... NC70 2 0017105015 HEX.HEAD BOLT 2 3 0601815759 TERMINAL BOARD ........................ 1 ........... KT206P 4 0027105020 MACHINE SCREW 2 5 0601804211 CURRENT TRANSFORMER ........... 1 ...........
Table of Contents BLW-400SSW --- CONTROL PARTS ASSY. (PART 2) CONTROL PARTS ASSY. (PART 2) PAGE 58 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Control Parts (Part 2) Table of Contents BLW-400SSW --- CONTROL PARTS ASSY. (PART 2) CONTROL PARTS ASSY. (PART 2) NO. PART NO. ITEM Full View 1 2 3 4 5 6 0601823820 0017105016 7961808903 0017106016 29411150000 0601802265 QTY. REMARKS CONTROL UNIT, THYRISTOR ........ 2 ........... FC90B HEX. HEAD BOLT 8 REACTOR 2 HEX. HEAD BOLT 8 FUSE .............................................. 1 ........... 15A; REPLACES 0601802135 FUSE HOLDER 1 BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents BLW-400SSW ENGINE AND RADIATOR ASSY. ENGINE AND RADIATOR ASSY. PAGE 60 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Engine and Radiator Table of Contents BLW-400SSW ENGINE AND RADIATOR ASSY. Full View ENGINE AND RADIATOR ASSY. NO. PART NO. ITEM QTY. REMARKS 1 7960150004 ENGINE .......................................... 1 ........... KUBOTA V1205 2 1753872060 RADIATOR ...................................... 1 ........... REPLACES 0602011973 3 7962012504 BRACKET, RADIATOR 2 4 011006010 HEX.HEAD BOLT ........................... 6 ........... REPLACES 0017106010 5 0017106016 HEX.HEAD BOLT 6 6 1628672940 RADIATOR HOSE ....
Table of Contents BLW-400SSW --- BATTERY ASSY. BATTERY ASSY. PAGE 62 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Battery Table of Contents BLW-400SSW --- BATTERY ASSY. Full View BATTERY ASSY. NO. PART NO. ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 BATTERY ...................................... 1 ............ REPLACES 0168306531; 65D31R BATTERY SHEET 1 BATTERY BAND ........................... 1 ............ REPLACES 0805087103 BATTERY BOLT 2 WING NUT 2 LOCK WASHER 2 PLAIN WASHER 2 BATTERY CABLE ......................... 1 ............ MAKE LOCALLY BATTERY CABLE ......................... 1 ............
Table of Contents BLW-400SSW --- MUFFLER ASSY. MUFFLER ASSY. PAGE 64 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Muffler Table of Contents BLW-400SSW --- MUFFLER ASSY. Full View MUFFLER ASSY. NO. PART NO. 1 7962310102 2 0017108020 3 7962350013 4 0602320071 5 1502336004 6 0207208000 7 0017108030 8 7962355203 9 3312320004 10 0017108035 11 0017108020 12 0130012000 ITEM QTY. REMARKS MUFFLER 1 HEX. HEAD BOLT 6 EXHAUST PIPE 1 GASKET ....................................... 1 ............ 1537112371 GASKET 1 HEX.NUT 4 HEX.HEAD BOLT 2 EXHAUST PIPE 1 PIPE BAND 1 HEX. HEAD BOLT 1 HEX.
Table of Contents BLW-400SSW --- FUEL TANK ASSY. FUEL TANK ASSY. PAGE 66 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Fuel Tank Table of Contents BLW-400SSW --- FUEL TANK ASSY. FUEL TANK ASSY. NO. PART NO.
Table of Contents BLW-400SSW --- ENCLOSURE ASSY. ENCLOSURE ASSY. PAGE 68 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Enclosure Table of Contents BLW-400SSW --- ENCLOSURE ASSY. Full View ENCLOSURE ASSY. NO. PART NO.
Table of Contents BLW-400SSW --- RUBBER SEAL ASSY. RUBBER SEAL ASSY. PAGE 70 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Full View Table of Contents BLW-400SSW --- RUBBER SEAL ASSY. Full View RUBBER SEAL ASSY. NO. PART NO. 45 0225000565 46 0225000875 47 0229400560 48 0229400115 49 0229400490 50 0229400880 51 0229200710 52 0229200330 53 0229200600 ITEM RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL QTY. 2 2 2 2 1 1 2 2 2 REMARKS BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents BLW-400SSW --- DECALS DECAL ASSY. PAGE 72 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Decals Table of Contents BLW-400SSW --- DECALS Full View DECAL ASSY. NO. PART NO.
Table of Contents KUBOTA V1205B --- CRANKCASE ASSY. CRANKCASE ASSY. PAGE 74 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Crankcase Table of Contents KUBOTA V1205B --- CRANKCASE ASSY. Full View CRANKCASE ASSY. NO. PART NO. 010 1753801010 020* 1545196270 030* 1522103490 040* 1526193010 050* 1627196020 060* 1624196010 070* 1552193020 080* 0631175018 090* 1627196160 100* 0501200508 110* 0501200814 120* 0501200610 130* 1523133960 140* 1624133650 150* 1624196262 160* 1522156280 170* 1628296010 180* 1627155350 190* 1522133610 200* 1502133660 210 1522133700 220 1584773130 230 1584139010 ITEM QTY. REMARKS COMP. CRANKCASE ........
Table of Contents KUBOTA V1205B --- OIL PAN ASSY. OIL PAN ASSY. PAGE 76 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Oil Pan Table of Contents KUBOTA V1205B --- OIL PAN ASSY. Full View OIL PAN ASSY. NO. PART NO. 010 1628201500 020 1629901620 030 0102350612 040 1522133750 050 7000065259 060 1624132110 070 0112350816 080 0481100160 090 1625936410 ITEM QTY. REMARKS COMP. OIL PAN 1 GASKET, OIL PAN .......................... 1 ........... REPLACES 1624101620 BOLT 26 PLUG 1 GASKET ......................................... 1 ...........
Table of Contents KUBOTA V1205B --- CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 78 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Cylinder Head Table of Contents KUBOTA V1205B --- CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. PART NO. ITEM QTY. REMARKS 010 1624101750 HOOK, ENGINE 1 020 1624101770 HOOK, ENGINE 1 030 0112350814 BOLT 2 040 1624503040 COMP. CYLINDER HEAD ............... 1 ...........
Table of Contents KUBOTA V1205B --- GEAR CASE ASSY. GEAR CASE ASSY. PAGE 80 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Gear Case Table of Contents KUBOTA V1205B --- GEAR CASE ASSY. Full View GEAR CASE ASSY. NO. PART NO. ITEM 010 020* 030* 040* 050* 060* 070* 080* 090* 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 COMP. CASE, GEAR ...................... 1 ........... INCLUDES ITEMS W/* PLUG 4 JOINT, PIPE 1 SPRING 1 SEAT, VALVE 1 BALL 1 OIL PUMP ROTOR ASSY. 1 OIL PUMP COVER 1 SCREW 5 GASKET, GEAR CASE .................. 1 ...........
Table of Contents KUBOTA V1205B --- MAIN BEARING CASE ASSY. MAIN BEARING CASE ASSY. PAGE 82 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Main Bearing Case Table of Contents KUBOTA V1205B --- MAIN BEARING CASE ASSY. MAIN BEARING CASE ASSY. NO. PART NO. ITEM Full View 010 020 030 040 050 060 070 080 090 100 110 120 1624104092 1624104540 1626404360 1624104810 1624104460 1626404820 0102350625 0102350620 1627104040 1624104560 1627104050 1627104060 QTY. REMARKS ASSY. CASE, MAIN BRG. 1 BOLT, BEARING CASE 8 GASKET, BRG. CASE .................... 1 ........... REPLACES 1624104360 COVER, BEARING CASE 1 OIL SEAL 1 GASKET, BRG. CASE COVER ......
Table of Contents KUBOTA V1205B --- HEAD COVER ASSY. HEAD COVER ASSY. PAGE 84 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Head Cover Table of Contents KUBOTA V1205B --- HEAD COVER ASSY. Full View HEAD COVER ASSY. NO. PART NO. ITEM 010 020 030 040 050 060 070 080 090* 100 110* 120 130 140 COMP. BREATHER 1 GASKET, BREATHER 2 BOLT 2 ELEMENT, BREATHER 1 PIPE, BREATHER 1 BAND, PIPE 2 PLATE 1 ASSY. COVER, CYLINDER ............ 1 ............ INCL.
Table of Contents KUBOTA V1205B --- INLET MANIFOLD ASSY. INLET MANIFOLD ASSY. PAGE 86 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Inlet Manifold Table of Contents KUBOTA V1205B --- INLET MANIFOLD ASSY. INLET MANIFOLD ASSY. NO. PART NO. ITEM Full View 010 020 030 040 050 060 1625911800 1624105550 1624111820 0102350618 0102350630 0102350650 COMP. INLET MANIFOLD JOINT, BREATHER PIPE GASKET, IN-MANIFOLD BOLT BOLT BOLT QTY. REMARKS 1 1 1 3 2 3 BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents KUBOTA V1205B --- EXHAUST MANIFOLD ASSY. EXHAUST MANIFOLD ASSY. PAGE 88 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Exhaust Manifold KUBOTA V1205B --- EXHAUST MANIFOLD ASSY. EXHAUST MANIFOLD ASSY. NO. PART NO. ITEM Full View 010 020 030 040 050 060 1721512310 1629912360 1624191490 1627192010 0151350822 1526312370 QTY. REMARKS MANIFOLD, EXHAUST 1 GASKET, EX-MANIFOLD ............... 1 ........... REPLACES 1624112360 STUD 8 NUT ................................................. 8 ........... REPLACES 1624192010 STUD 4 GASKET, MUFFLER ....................... 1 ...........
Table of Contents KUBOTA V1205B --- ROCKER ARM VALVE ASSY. ROCKER ARM VALVE ASSY. PAGE 90 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Rocker Arm Valve KUBOTA V1205B --- ROCKER ARM VALVE ASSY. ROCKER ARM VALVE ASSY. NO. PART NO. ITEM Full View 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190 200 210 1624113110 1629913120 1627113240 1624113330 1526113360 1624113150 1624113280 1624114050 0341050606 1624114350 1624114410 1526192010 1526194010 1526114420 1624114430 1624114440 1624114310 0461200120 1624114030 1624114230 1624114240 QTY.
Table of Contents KUBOTA V1205B --- CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 92 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Camshaft Table of Contents KUBOTA V1205B --- CAMSHAFT ASSY. Full View CAMSHAFT ASSY. NO. PART NO. 010 1526115550 020 1624115110 030 1627116010 035* 1627116150 040* 1552193610 050* 1624116510 060* 0571200518 070* 1624116270 080* 0102350614 090 1627124010 100# 1627124980 110 1624124360 120 1624124370 130 1624124320 140 1624124250 150 0102350616 ITEM QTY. REMARKS TAPPET 8 PUSH ROD 8 CAMSHAFT ASSY. ......................... 1 ........... INCL.
Table of Contents KUBOTA V1205B--- PISTON CRANKSHAFT ASSY. PISTON CRANKSHAFT ASSY. PAGE 94 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Piston Crankshaft KUBOTA V1205B --- PISTON CRANKSHAFT ASSY. PISTON CRANKSHAFT ASSY. NO. PART NO.
Table of Contents KUBOTA V1205B --- FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 96 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Flywheel Table of Contents KUBOTA V1205B --- FLYWHEEL ASSY. Full View FLYWHEEL ASSY. NO. PART NO. ITEM 010 020* 030 040 050 060 070 080 090 100 110 120 COMP. FLYWHEEL ......................... 1 ........... INCL. ITEMS W/* GEAR, RING ................................... 1 ........... REPLACES 1523163820 BOLT, FLYWHEEL 6 HOUSING, FLYWHEEL 1 BOLT 8 COVER ............................................ 1 ........... REPLACES 3122014170 BOLT 1 PLAIN WASHER 1 BOLT 1 PLAIN WASHER 1 STARTER ASSY. ..............
Table of Contents KUBOTA V1205B --- INJECTION PUMP ASSY. INJECTION PUMP ASSY. PAGE 98 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Injection Pump Table of Contents KUBOTA V1205B --- INJECTION PUMP ASSY. Full View INJECTION PUMP ASSY. NO. PART NO. ITEM QTY. REMARKS 010 1627195690 JOINT 1 020 1624142010 FUEL PIPE ASSY. .......................... 1 ........... INCL. ITEMS W/* 030* 1624142750 PIPE BAND 2 040 1628551010 INJECTION PUMP ASSY. 1 050 1588152110 INJECTION PUMP SHIM 1 060 1624152110 INJECTION PUMP SHIM 2 070 0131110620 BOLT 3 080 1584191500 STUD 3 090 1584192320 CAP NUT 3 100 030206150 LOCK WASHER ............................
Table of Contents KUBOTA V1205B --- FUEL CAMSHAFT ASSY. FUEL CAMSHAFT ASSY. PAGE 100 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Fuel Camshaft Table of Contents KUBOTA V1205B --- FUEL CAMSHAFT ASSY. Full View FUEL CAMSHAFT ASSY. NO. PART NO. ITEM QTY. REMARKS 010 1624116170 FUEL CAMSHAFT 1 020 0810306202 BALL BEARING 1 030 0810306204 BALL BEARING 1 040 1624151110 CAM, FUEL 1 050 1624192330 CAP NUT 1 060 1624195230 WOODRUFF KEY 1 070 1753851150 INJECTION PUMP GEAR 1 080 0102350618 BOLT 3 090 1624116320 STOPPER 1 100 0102350612 BOLT 2 110 1628255012 GOVERNOR SHAFT ASSY. .....................1 .......... INCL.
Table of Contents KUBOTA V1205B --- NOZZLE HOLDER ASSY. NOZZLE HOLDER ASSY. PAGE 102 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Nozzle Holder KUBOTA V1205B --- NOZZLE HOLDER ASSY. NOZZLE HOLDER ASSY. NO. PART NO. ITEM Full View 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190 1627142502 1584151360 1560196650 1753842020 1624142320 1758242030 1624142320 1510142570 1647553000 1584153622 1627153710 1627153722 1627153712 1627153742 1584153850 1584153860 0302450520 1624165512 1627165560 QTY. REMARKS OVER FLOW PIPE ASSY. .............. 1 ...........
Table of Contents KUBOTA V1205B --- IDLING APPARATUS ASSY. IDLING APPARATUS ASSY. PAGE 104 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Idling Apparatus Table of Contents KUBOTA V1205B --- IDLING APPARATUS ASSY. Full View IDLING APPARATUS ASSY. NO. PART NO. ITEM QTY. REMARKS 010 1625954090 IDLE APPARATUS ASSY. ............... 1 ........... INCL. ITEMS W/* 020* 1625954100 ADJUSTING BOLT ASSY. 1 030* 1584192020 NUT 1 040* 1584192330 CAP NUT 1 050* 1560196650 GASKET 2 060* 1624154420 CAP 1 070 1624154120 ADJUSTING BOLT 1 080 1584192020 NUT 1 090 1584192330 CAP NUT 1 100 1560196650 GASKET 2 110 1624154420 CAP 1 120 1627160012 SOLENOID ASSY.
Table of Contents KUBOTA V1205B --- GOVERNOR ASSY. GOVERNOR ASSY. PAGE 106 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Governor Table of Contents KUBOTA V1205B --- GOVERNOR ASSY. GOVERNOR ASSY. NO. PART NO. 010 1628556480 020 1628556410 040 1625756052 050* 1626156210 060* 1624156153 1624194010 Full View 070* 090* 1624156330 100* 0461200090 110 1624156250 120 1624156260 130 0102350614 140 1624156210 150 1624156340 ITEM QTY. REMARKS START SPRING 1 GOVERNOR SPRING 1 FORK LEVER ASSY. ...................... 1 ........... INCL.
Table of Contents KUBOTA V1205B --- SPEED CONTROL PLATE ASSY. SPEED CONTROL PLATE ASSY. PAGE 108 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Speed Control Plate Table of Contents KUBOTA V1205B --- SPEED CONTROL PLATE ASSY. SPEED CONTROL PLATE ASSY. NO. PART NO. ITEM Full View 010 020* 030* 040* 050* 060* 070* 080* 090* 100* 110* 120* 130 140 150 160 170 1758257010 1627157150 1624157160 0481100100 0541100420 1624194020 1624192020 1627156023 1627157720 1547157980 1622257510 1627157740 1624157210 0102350616 0151350616 0205650060 030206150 QTY. REMARKS CONTROL PLATE ASSY. ............... 1 ........... INCL.
Table of Contents KUBOTA V1205B --- DYNAMO ASSY. DYNAMO ASSY. PAGE 110 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Dynamo Table of Contents KUBOTA V1205B --- DYNAMO ASSY. Full View DYNAMO ASSY. NO. PART NO. ITEM 010 020 030 040 050 060 070 080 DYNAMO ASSY. DYNAMO STAY BOLT BOLT NUT PLAIN WASHER PLAIN WASHER BOLT 1553164013 1622564420 0112350825 0112350855 0205650080 0401350080 0401550080 0102350616 QTY. REMARKS 1 1 1 1 1 1 1 1 BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents KUBOTA V1205B --- WATER FLANGE ASSY. WATER FLANGE ASSY. PAGE 112 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Water Flange Table of Contents KUBOTA V1205B --- WATER FLANGE ASSY. WATER FLANGE ASSY. NO. PART NO. ITEM Full View 010 020 040 060 070 080 090 100 110 120 130 140 150 160 170 1622272700 1624173340 1753883040 1626472920 0102350616 0102350655 1624173350 1624173360 1920373010 1627173260 1567673270 0102350630 1628572860 1624172870 3620082720 QTY. REMARKS COMP. FLANGE, WATER 1 PIPE, WATER RETURN 1 THERMOMETER SWITCH 1 WATER FLANGE GASKET ............. 1 ...........
Table of Contents KUBOTA V1205B --- WATER PUMP ASSY. WATER PUMP ASSY. PAGE 114 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Water Pump Table of Contents KUBOTA V1205B --- WATER PUMP ASSY. Full View WATER PUMP ASSY. NO. PART NO. 010 1625973032 020* 1625973550 030* 1548173050 040* 1625973510 050* 1624173340 060 1623973430 070 0102350630 080 0102350680 090 1625973520 ITEM QTY. REMARKS WATER PUMP ASSY. ..................... 1 ........... INCLUDES ITEMS W/*;REPLACES 1625973030 BALL BEARING 1 MECHANICAL SEAL ASSY. 1 WATER PUMP IMPELLER 1 WATER RETURN PIPE 1 WATER PUMP GASKET ................. 1 ...........
Table of Contents KUBOTA V1205B --- FAN ASSY. FAN ASSY. PAGE 116 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Fan Table of Contents KUBOTA V1205B --- FAN ASSY. Full View FAN ASSY. NO. PART NO. ITEM 010 020 030 040 050 060 FAN ................................................. 1 ........... REPLACES 1625974112 FAN PULLEY 1 FLANGE BOLT 4 FAN DRIVE PULLEY 1 BOLT 1 V BELT 1 1727474110 1624174250 175450612 1753874280 1624191020 1624197010 QTY. REMARKS BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents KUBOTA V1205B --- RADIATOR ASSY. RADIATOR ASSY. PAGE 118 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Radiator Table of Contents KUBOTA V1205B --- RADIATOR ASSY. Full View RADIATOR ASSY. NO. PART NO. ITEM 010 020* 030* 040* 050 060 070 RADIATOR ASSY. ........................... 1 ........... INCLUDES ITEMS W/* CAP ASSY. 1 WATER OVER FLOW PIPE 1 PIPE CLIP 2 WATER PIPE 1 WATER PIPE 1 CLAMP 4 1753872060 1527272020 1562172710 1550172470 1628672850 1628672940 3620082720 QTY. REMARKS BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
Table of Contents KUBOTA V1205B --- AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 120 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Air Cleaner Table of Contents KUBOTA V1205B--- AIR CLEANER ASSY. AIR CLEANER ASSY. NO. PART NO. ITEM Full View 010 020* 030* 040* 050* 060* 070* 080 090 1753811010 1574111080 1574192620 1574194430 1574111470 1574111170 1627187450 1538111250 1500036920 QTY. REMARKS AIR CLEANER ASSY. ..................... 1 ........... INCLUDES ITEMS W/* CLEANER ELEMENT ASSY. 1 WING BOLT 1 GASKET ASSY. 1 VALVE 1 GASKET 1 A/C ELEMENT LABEL 1 AIR CLEANER BAND ..................... 1 ...........
Table of Contents KUBOTA V1205B --- FUEL FILTER COMPONENT ASSY. FUEL FILTER COMPONENT ASSY. PAGE 122 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Fuel Filter Component KUBOTA V1205B --- FUEL FILTER COMPONENT ASSY. FUEL FILTER COMPONENT ASSY. NO. PART NO. ITEM Full View 010 020* 030*# 040*# 050*# 060* 070* 080* 090* 100* 110* 1758243010 1758243510 1430143820 1430143840 1430143830 1627143580 1627143590 1627143570 1627143560 1627143930 1556787460 QTY. REMARKS FUEL FILTER ASSY. ...................... 1 ........... INCLUDES ITEMS W/* BODY .............................................. 1 ...........
Table of Contents KUBOTA V1205B --- DYNAMO COMPONENT ASSY. DYNAMO COMPONENT ASSY. PAGE 124 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Dynamo Component KUBOTA V1205B --- DYNAMO COMPONENT ASSY. DYNAMO COMPONENT ASSY. NO. PART NO. ITEM Full View 010 020* 030*# 040*# 050*# 060*# 070*# 080* 090*% 100*% 110*% 120*% 130*% 140*% 150* 160* 170* 180* 1553164013 1553164122 1553164110 1553164040 1553164140 1553174180 1553174140 1553164363 1526493010 1553164292 1553164072 0814106201 1553193010 1553164190 1526164150 1526192030 1526194070 1526194020 QTY. REMARKS DYNAMO ASSY. ............................. 1 ...........
Table of Contents KUBOTA V1205B --- STARTER COMPONENT ASSY. STARTER COMPONENT ASSY. PAGE 126 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Starter Component Table of Contents KUBOTA V1205B --- STARTER COMPONENT ASSY. STARTER COMPONENT ASSY. NO. PART NO.
Table of Contents KUBOTA V1205B --- NOZZLE HOLDER COMPONENT ASSY. NOZZLE HOLDER COMPONENT ASSY. PAGE 128 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Nozzle Holder Component KUBOTA V1205B --- NOZZLE HOLDER COMPONENT ASSY. NOZZLE HOLDER COMPONENT ASSY. NO. PART NO.
Table of Contents KUBOTA V1205B --- NOZZLE HOLDER COMPONENT ASSY. NOZZLE HOLDER COMPONENT ASSY. PAGE 130 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Nozzle Holder Component Table of Contents KUBOTA V1205B --- NOZZLE HOLDER COMPONENT ASSY. NOZZLE HOLDER COMPONENT ASSY. NO. PART NO. ITEM Q TY. REMARKS 110# 1584198810 ADJUSTING WASHER .................... 4 ........... 1.675MM 110# 1584198820 ADJUSTING WASHER .................... 4 ........... 1.700MM 110# 1584198830 ADJUSTING WASHER .................... 4 ........... 1.725MM 110# 1584198840 ADJUSTING WASHER .................... 4 ........... 1.750MM 110# 1584198850 ADJUSTING WASHER ....................
Table of Contents KUBOTA V1205B --- INJECTION PUMP COMPONENTS ASSY. INJECTION PUMP COMPONENTS ASSY. PAGE 132 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Injection Pump Components KUBOTA V1205B --- INJECTION PUMP COMPONENTS ASSY. INJECTION PUMP COMPONENTS ASSY. NO. PART NO.
Table of Contents KUBOTA V1205B --- ACCESSORIES ACCESSORIES ASSY. PAGE 134 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV.
Table of Contents Accessories KUBOTA V1205B --- ACCESSORIES ACCESSORIES ASSY. NO. PART NO. ITEM Full View 090 100* 110 130 140 150# 160 170 180 190 200 210 220 1753842500 1024442320 0966170500 1491142750 3741059110 374105510 1518160190 1518160200 151160260 151165760 1569465990 1518164602 1624787112 QTY. REMARKS OVER FLOW PIPE ASSY. .............. 1 ........... INCLUDES ITEMS W/* PIPE CLIP ...................................... 2 ...........
Table of Contents TERMS AND CONDITIONS OF SALE — PARTS Effective: July 1, 2000 PAYMENT TERMS 4. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier.
NOTE PAGE BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV.
PARTS AND OPERATION MANUAL PARTS AND OPERATION MANUAL Table of Contents HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800/427-1244 or 310/537-3700 FAX: 800/672-7877 or 310/637-3284 SERVICE DEPARTMENT 800/835-2551 or 310/537-3700 FAX: 310/638-8046 WARRANTY DEPARTMENT 800/835-2551 or 310/537-3700 FAX: 310/638-8046 MAIN 800/421-1244 or 310/537-3700 FAX: 310/537-3927 Manufactured for Multiquip Inc. by DENYO MANUFACTURING, CO., USA MULTIQUIP INC.
