User Manual

B-46 WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #8 (05/08/12) — PAGE 7
SPECIFICATIONS
Table 2. Trowel Specifications
Model B46H90 / B46R90 / B46H11 B46H11H
Number of Blades 4 4
Ring Diameter 46.5 in. (1181 mm) 46.5 in. (1181 mm)
Rotor Speed (RPM) 60 - 130 90 - 155
Path Width 43.5 in. (1105 mm) 43.5 in. (1105 mm)
Table 4. Specifications (Engines)
Engine
Model HONDA GX270UTQA2 ROBIN EX-270D50020 HONDA GX340U1QAP2
Ty pe
Air-cooled 4 stroke, Single
Cylinder, OHV, Horizontal Shaft
Gasoline Engine
Air-cooled 4 stroke, Single
Cylinder, OHV, Horizontal Shaft
Gasoline Engine
Air-cooled 4 stroke, Single
Cylinder, OHV, Horizontal Shaft
Gasoline Engine
Bore X Stroke
3.0 in. X 2.3 in.
(77 mm x 58 mm)
2.95 in. X 2.36 in.
(75 mm x 60 mm)
3.2 in. X 2.5 in.
(82 mm x 64 mm)
Displacement 270 cc 265 cc 337 cc
Max Output 9 H.P. @ 3600 RPM 9 H.P. @ 4000 RPM 11 H.P. @ 3600 RPM
Fuel Tank Capacity
Approx. 1.59 U.S. Gallons (6.0
Liters)
Approx. 1.59 U.S. Gallons (6.0
Liters)
Approx. 1.72 U.S. Gallons (6.5
Liters)
Fuel Unleaded Gasoline Unleaded Gasoline Unleaded Gasoline
Lube Oil Capacity 1.06 Qt. (1.0 Liters) 1.06 Qt. (1.0 Liters) 1.06 Qt. (1.0 Liters)
Speed Control Method Centrifugal Fly-weight Type Centrifugal Fly-weight Type Centrifugal Fly-weight Type
Starting Method Recoil Start Recoil Start Recoil Start
Dimension (L x W x H)
14.0 x 16.9 X 16.1 in.
(355 X 430 X 410 mm)
13.82 x 16.54 X 16.14 in.
(351 X 420 X 410 mm)
16.7 x 17.7 X 17.4 in.
(425 X 450 X 443 mm)
Dry Net Weight
50.7 lbs (23 Kg.) 46.3 lbs (21 Kg.) 68 lbs (29 Kg.)
Table 3. Noise and Vibration Emissions for Model B46H90
Guaranteed ISO 11201:2010 Based
Sound Pressure Le
vel at Operator Station in dB(A)
Quick Pitch
TM
Handle 89
Standard Handle 89
Guaranteed ISO 3744:2010 Based
Sound Power Level in dB(A)
Quick Pitch
TM
Handle 111
Standard Handle 111
Hand-Arm Vibration Per ISO 5349-1:2001
in m/s
2
¦A(8)
Quick Pitch
TM
Handle 1.7
Standard Handle 1.51
NOTES:
1. Sound Pressure and Power Levels are “A” weighted Measures per ISO 226:2003 (ANSI S1.4-1981). They are measured with the operating
condition of the machine which generates the most repeatable but highest values of the sound levels. Under normal circumstances, the sound
level will vary depending on the condition of the material being worked upon.
2. The vibration level indicated is the vector sum of the RMS (Root Mean Square) Values of amplitudes on each axis, standardized to an 8 hour
exposure period, and obtained using operating condition of the machine that generates the most repeatable but highest values in accordance
with the applicable standards for the machine.
3. Per EU Directive 2002/44/EC, the daily exposure action value for hand/arm vibration is 2.5 m/s
2
“A(8). The daily exposure limit value is 5 m/s
2
“A(8).