Operation Manual

Register your pedometer → upload your steps
How do I set up my pedometer
Install the battery according to
the instructions in the Omron
instruction manual included in
the pedometer packaging.
Insert the flash disk into the
USB port of your computer.
Remember that you must have
administrative rights in order
to install this software onto a
computer.
You can prevent interference
from anti-virus software
before and during installation
by disabling the software.
Remember to re-enable it on
completion of the installation.
A screen providing step-
by-step instructions should
appear automatically. If there
is no such screen, refer to the
instructions in the ‘Getting
started’ section in this user
manual.
Remember that you cannot
switch the pedometer off.
The pedometer will start to
count and display the number
of steps you have taken after
you have been walking for
longer than four seconds.
The pedometer will
automatically reset to zero
steps at 00:00 hours each day.
Refer to the Omron instruction
manual for instructions on
wearing your pedometer for
maximum accuracy.
Q
A