Operation Manual

Seite 15
Parts List - STUNTMASTER# 264293:
Part No. Qty Description Material Dimensions
1 1 Fuselage Elapor Ready made
2 1 Wing Elapor Ready made
3 1 Tailplane Elapor Ready made
4 1 Rudder Elapor Ready made
5,6 2 Brace support Elapor Ready made
7 1 Battery hatch Elapor Ready made
8 3 Spinner Elapor 40 mm Ø
9 1 Fin in-! ll piece Elapor Ready made
10 1 Left-hand undercarriage leg Elapor Ready made
11 1 Right-hand undercarriage leg Elapor Ready made
12 2 Spinner centring pin CFRP 2.5 x 13
13 2 O-ring for attaching propeller Rubber 17 mm Ø
14 1 Propeller, GWS EP Plastic 9 x 5“
15 2 Propeller adapter ring Aluminium 10 mm Ø
15 2 Tailplane brace CFRP / plastic approx. 1.5 x 130 mm
16 2 Front wing brace CFRP / plastic approx. 1.3 x 300 mm
17 2 Rear wing brace CFRP / plastic approx. 1.3 x 305 mm
18 2 Aileron pushrod CFRP / plastic approx. 1.3 x 130 mm
19 1 Elevator pushrod CFRP / plastic approx. 1.3 x 510 mm
20 1 Rudder pushrod CFRP / plastic approx. 1 3 x 620 mm
21 1 Rudder pull-cable Kevlar approx. 3.3 m long
22 4 Screw Metal 1.4 x 6 mm
23 4 Washer Metal 5 mm Ø
24 1 L.H. aileron horn Plastic Ready made
24 3 Pushrod clevis Plastic Ready made
25 4 Motor mounting screw Metal 2 x 5 mm
26 1 STUNTMASTER building instructions Paper Din A 4
27 1 Model complaint processing form Paper Din A 5