Operating instructions

SMART SX
_________________________________________________________________________________________________________
Page 28
SMART SX instructions # 985 5335 (23.07.2012 PaCh) • Errors and omissions excepted •
©
MULTIPLEX
13. FAULT FINDING
Although the system is simple to use and extremely secure and reliable, you may still encounter the occasional prob-
lem when using the SMART SX. The table below lists a few possible problems, together with their causes and reme-
dies. Please check the table, as the cause of a problem is often a mistake in handling, and the table is designed to help
you locate errors which are often extremely simple.
Fault Reason Remedy
1
Transmitter cannot be switched
on
Dry / rechargeable cells completely
flat
Fit new dry cells, charge re-
chargeable cells, check cells are
correctly inserted
2 Control surface travels too small Dual Rates active
Check Dual Rate settings, see
Chapter 7.11
3
The system fails to work over the
distance specified for the range
check
The receiver aerial may not be in-
stalled correctly
Try a different aerial position;
see Chapter 7.16
4 Model cannot be controlled
Receiver not bound to transmitter
Flat airborne battery
Carry out Binding procedure,
Charge airborne battery
5 Binding cannot be carried out
Distance between transmitter and
receiver too great
Reduce the distance to 20 cm or
less
The MULTIPLEX team hopes you have many hours of pleasure with your SMART SX radio control system.
Errors and amendments reserved