Operation Manual

Tamiya model trucks
Page 68
SMART SX FLEXX
3
Move the left vertical rocker switch to
centre position. (3-speed gearbox)
An acoustic signal indicates that centre
position has been assumed.
4
Start programming mode on the MFC-01 (see operating instructions for
Tamiya MFC-01).
5
Teaching the actuator:
Hold the actuators in the end positions for 2 seconds each.
(a)
Left stick: forwards
(b)
Left stick: backwards
(c)
Left vertical rocker switch (gearbox):
 press forwards and hold
 press backwards and hold
 return to the centre position by
briefly pressing the rocker switch
(An acoustic signal indicates that
centre position has been
assumed.)