Operating instructions

RR Panda Sport
# 26 4268
RR Panda Sport
# 26 4268
D
Zusatzanleitung RR Panda Sport Nr. 82 5912 - 20130221 BEDO Seite 1 von 2
GB
Das Modell RR Panda Sport # 26 4268 ist nahezu ugfertig vormontiert
und es entfallen für Sie zahlreiche Arbeitsschritte, die in der Bauanleitung
beschrieben sind. Das Modell ist somit in kürzester Zeit betriebsbereit.
Lesen Sie vor Fertigstellung und Inbetriebnahme die Bauanleitung und
beachten unbedingt auch die Sicherheitshinweise und Tipps.
Um das Modell vollständig auszurüsten, ist noch ein Empfänger und der
Antriebsakku notwendig. Unsere Empfehlungen hierzu entnehmen Sie
bitte aus der Bauanleitung und darüber hinaus (z.B. Sender, Ladegerät
etc.) dem aktuellen Katalog oder der Multiplex Homepage unter: www.
multiplex-rc.de
Stückliste RR Panda Sport # 26 4268
Lfd. Stk. Bezeichnung Material Abmessungen
1 1 Bauanleitung Panda Sport KIT
1.1 1 Anleitungen Panda Sport RR / MULTIcont BL-20 SD / Antrieb
3 * 1 Rumpf vormontiert * Elapor geschäumt Fertigteil
5 1 Tragäche links Elapor geschäumt Fertigteil
6 1 Tragäche rechts Elapor geschäumt Fertigteil
7+8 1 Höhenleitwerk Elapor geschäumt Fertigteil
30 50 Trimmgewicht Metallkugel Ø4mm / 15g
20 2 Klettband Pilzkopf Kunststoff 25 x 60 mm
21 2 Klettband Velours Kunststoff 25 x 60 mm
28 1 Inbusschlüssel Metall SW 1,5
* mit 2 eingebauten Servos Nano-S (UNI) incl. kompl. Ruderanlenkung,
Motor PERMAX BL-O 2812-1100, Regler MULTIcont BL-20 SD und
montiertem Klapp-Propeller 7x4“.
1. Prüfen Sie mit Hilfe der Stückliste den Inhalt auf Vollständigkeit.
2. Fernsteuerungseinbau
Punkt 14. in der Bauanleitung ==> Abb.13
3. Tragächen anbringen ==> Abb.30
4. Höhenleitwerk montieren ==> Abb.29
5. Kontrolle des Modells
Punkt 27. in der Bauanleitung ==> Abb.34
6. Ruderausschläge und Schwerpunkt einstellen
Punkt 28. und 31. in der Bauanleitung ==> Abb.31+33
7. Der Erstug - ab Punkt 32 in der Bauanleitung
Prüfen Sie vor jedem Start die Funktionsfähigkeit Ihres Modells, der
Ruder und Anlenkungen sowie den Anrieb und die Akkus.
# 26 4268
The RR Panda Sport # 26 4268 is supplied pre-assembled and virtually
ready to y. Many of the individual stages of construction described in the
Building Instructions are already completed for you, with the result that
the model can be ready for the air very quickly. Please take the time to
read through the Building Instructions before completing and ying the
model, paying particular attention to the Safety Notes and Tips. To com-
plete the model’s equipment you will need a receiver and ight battery.
For our recommended items please refer to the Building Instructions. For
additional items (e.g. transmitter, battery charger etc.) refer to the current
catalogue or the MPX website at: www.multiplex-rc.de
Parts List - RR Panda Sport # 26 4268
Part-No No.off Description Material Dimensions
1 1 Panda Sport KIT building instructions
1.1 1 RR Panda Sport / MULTIcont BL-20 SD / Power Set instructions
3 * 1 Fuselage, assembled * Moulded Elapor foam Ready made
5 1 L.H. wing panel Moulded Elapor foam Ready made
6 1 R.H. wing panel Moulded Elapor foam Ready made
7+8 1 Tailplane Moulded Elapor foam Ready made
30 50Trim ballast Metal balls Ø4mm / 15g
20 2 Velcro tape, “hook” Plastic 25 x 60 mm
21 2 Velcro tape, “loop” Plastic 25 x 60 mm
28 1 Allen key Metal 1.5 mm A/F
* With two factory-tted Nano-S (UNI) servos, including all control surface
linkages, Brushless motor PERMAX BL-O 2812-1100, controller MULTI-
cont BL-20 SD and assembled 7x4” folding propeller.
1. Check that all kit components are present, referring to the Parts List.
2. Installing the receiving system components
Point 14. in the Building Instructions ==> Fig. 13
3. Installing the wings ==> Fig. 30
4. Installing the tailplane ==> Fig. 29
5. Checking the model
Point 27. in the Building Instructions ==> Fig. 34
6. Setting the control surface travels and the Centre of Gravity
Points 28. and 31. in the Building Instructions ==> Figs. 31+33
7. First ight - section in the Building Instructions starting at Point 32.
Before each ight check all the model’s working systems: the control
surfaces, the linkages, the power system and the batteries.
D : Zusätzlich Empfohlene Ausrüstung
Empfänger z.B. RX-5 light M-LINK # 5 5808
oder Empfänger RX-5 M-LINK telemetriefähig # 5 5817
Akku z.B. Li-BATT FX 3/1-950 (M6) # 15 7321
GB: Additional recommended equipment:
Receiver e.g. z.B. RX-5 light M-LINK # 5 5808
or RX-5 M-LINK telemetry-capable # 5 5817
Flight battery e.g. Li-BATT FX 3/1-950 (M6) # 15 7321
F : Equipement recommandé:
Récepteur z.B. RX-5 light M-LINK # 5 5808
ou RX-5 M-LINK télémétrique # 5 5817
accu p.es. Li-BATT FX 3/1-950 (M6) # 15 7321
I : Componenti consiglati:
Ricevente p.es. z.B. RX-5 light M-LINK # 5 5808
oppure RX-5 M-LINK telemetrica # 5 5817
pacco batteria p.es. Li-BATT FX 3/1-950 (M6) # 15 7321
E : Componentes recomendados:
Receptor, p.ej. z.B. RX-5 light M-LINK # 5 5808
o RX-5 M-LINK compatible con telemetría # 5 5817
batería, p.ej. Li-BATT FX 3/1-950 (M6) # 15 7321
MULTIPLEX Modellsport GmbH & Co.KG.Westliche Gewerbestrasse 1.D-75015 Bretten-Gölshausen.www.multiplex-rc.de