manual

11
EasyGlider PRO + electric BlueEdition
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you are
completely satisfied with the contents of your kit. However, we would ask you to check all the parts (referring to the Parts List) before
you start construction, as we cannot exchange components which you have already worked on. If you find any part is not
acceptable for any reason, we will gladly correct the defect or replace the item in question once we have inspected it. Please send the
part to our Model Department, being sure to include the purchase receipt and a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in terms
of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we cannot
entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely
requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at the
flying field. Errors and carelessness in building and flying the model can result in serious personal injury and damage to
property. Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we
are obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Additional items required for the EasyGlider PRO:
Adhesive:
Use medium-viscosity cyano-acrylate glue (“cyano” - not styrofoam cyano) Zacki ELAPOR # 85 2727 for this model.
Epoxy adhesives produce what initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away
from the parts under load. Hot-melt glue (from a glue gun) is a useful alternative adhesive.
MULTIPLEX radio control system components for EasyGlider PRO:
RX-5 light M-Link receiver Order No. 5 5808
or RX-5 M-Link receiver (telemetriy capable) Order No. 5 5817
Tiny-S servo (2x required) Elevator / rudder Order No. 6 5121
Nano-S servo (2x required) aileron Order No. 6 5120
or Tuning-servo Tiny-MG (2x required) Elevator / rudder Order No. 6 5122
Tuning-servo Nano-PRO MG (2x required) aileron Order No. 6 5119
Extension lead 400 mm UNI (2x required) Aileron servo Order No. 8 5029
Extension lead 300 mm UNI (2x required) Aileron servo Order No. 8 5031
Battery charger:
MULTIcharger L-703 EQU 230V Order No. 9 2523
or Combo MULTIcharger LN-3008 EQU w. mains PSU, AC/DC 230V/12V 5,0A Order No. 9 2545
EasyGlider PRO power set
Power set "EasyGlider PRO 3S STANDARD" Li-BATT powered Order No. 33 3651
Power set "EasyGlider PRO 3S STANDARD" Order No. 33 2651
EasyGlider PRO tuning power set
Power set "EasyGlider PRO 3S TUNING" Li-BATT powered Order No. 33 3650
Power set "EasyGlider PRO 3S TUNING" Order No. 33 2650
Flight battery
Li-BATT eco 3/1-2000 (M6) 2000 mAh Order No. 15 7231
Li-BATT eco 3/1-3000 (M6) 3000 mAh Order No. 15 7236
Additional items required for the glider variant only
NiMH receiver battery, 4 / 2100 mAh Order No. 15 6052
Mini switch harness with charge socket Order No. 8 5045
Aero-tow release Order No. 72 3470
Tools:
Scissors, balsa knife, side-cutters.
Note: remove the illustration pages from the centre of the building instructions.
Specification: Glider Electric glider
Wingspan 1800 mm 1800 mm
Overall length 1130 mm 1130 mm
All-up weight approx. 800 g with standard power system approx. 980 g
Wing area, FAI approx. 41.6 dm² FAI approx. 41.6 dm²
Wing loading approx. 20 g / dm² approx. 24 g / dm²
RC functions Elevator, rudder, aileron as glider, plus throttle
GB