Operation Manual

ROYAL evo
Page 58
2. Mixer definition
The helicopter mixers can not be modified. In the mixer menu G only the values for the particular inputs can be set.
The table below shows the assignment of the five predefined mixers. Mixers 6 to 14 are not predefined. If you modify
mixer a warning appears in the display: “ATTENTION! Modifications affect all models using this mixer! Save changes?”
Pressing the ENTER button confirms the changes. Pressing REV/CLR restores the previous settings.
The symbols after the mixer input names have the following meaning:
™
symmetrical mixing
š
asymmetrical mixing
œ
single sided mixing with curve (2 points)
›-
single sided mixing with dead zone
™-
symmetrical mixing with dead zone
›+
aingle sided mixing with offset
-Tr
after the name of the input means “mixing without trim”
£ Define mixer
¨ Exit
Name ELEVATR+
1 Elevator ---- ™
2 Spoiler ---- œ
3 Flap ---- œ
4 Thr -Tr ---- ›-
5 -------- ---- --
£ Define mixer
¨ Exit
Name AILERON+
1 Aileron ---- ™
2 Spoiler ---- ›+
3 Flap ---- š
4 Ele -Tr Mix1 š
5 -------- ---- --
£ Define mixer
¨ Exit
Name V-TAIL+
1 Elevator ---- š
2 Rudder ---- š
3 Spoiler ---- œ
4 Flap ---- š
5 Thr -Tr ---- ›-
£ Define mixer
¨ Exit
Name FLAP+
1 Flap ---- š
2 Spoiler ---- ›+
3 Aileron ---- š
4 Ele -Tr Mix1 š
5 -------- ---- --
£ Define mixer
¨ Exit
Name DELTA+
1 Aileron ---- ™
2 Elevator ---- š
3 Thr -Tr ---- ›-
4 -------- ---- --
5 -------- ---- --