Operation Manual
ROYAL evo 7 - Instructions
Page 61
ENGLIS
H
20.3. Template: ACRO
Suitable for power models and powered aerobatic
models with two aileron servos, including power train-
ers, F3A-class competition models, fun-fly models (with
aileron differential, snap-flap mixers, …) and fast electric
models (hot-liners), for which the motor is controlled
using the throttle stick (with mixed functions such as
aileron differential, ailerons doubling as landing aid,
flaperons for thermal and speed tasks, V-tail mixer with
all elevator compensations for spoilers, flaps and throt-
tle). This model type includes flight phase switching.
Typical models: Sky-Cat (see sketch), Bonito
AILERON+
AILERON+
Rudder
ELEVATR+
Throttle
e.g.:
retracts,
tow release
AILERON+
Throttle
AILERON+
ELEVATR+
e.g.:
spoiler,
retract
Rudder
fixed
assignment
assigned but
alterable
vacant
20.3.1. Transmitter controls and switches
Name of assignment:
MOTOR
Control
Physical
control
Note
Throttle
‡
Stick
Idle = back
Can be altered (Î 13.3.3.)
Spoiler E
Spoiler retracted = forward
Can be altered (Î 13.3.4.)
Flap F Control for camber-changing flaps
L-Gear
O Retracts
Aero-tow G
Brake G
Gyro E
Mixture F Mixture adjustment
AUX1
L Auxiliary channel 1
AUX2
G Auxiliary channel 2
Switch
Physical
control
D-R
L
Dual-Rate switch for
aileron, elevator and rudder
CS
N Combi-Switch
THR-CUT
H EMERGENCY throttle CUT
Timer
‡
Stick
Runs when throttle stick = forward
Can be altered (Î 17.)
SNAP/FLAP
Mix-1
I
Switch for SNAP-FLAP
Switch for A/B mixer (Î 9.2.)
Mix-2 G
Switch for A/B mixer (Î 9.2.)
Mix-3 L
Switch for A/B mixer (Î 9.2.)
Teacher
M Trainer switch
F-PH 1-3
J Flight phase switch
20.3.2. Servo assignment /
receiver output sequence
Chan
-nel
MPX Hitec Futaba JR
1 AILERON+ AILERON+ AILERON+ Throttle
2 ELEVATR+* ELEVATR+* ELEVATR+* AILERON+
3 Rudder* Throttle Throttle ELEVATR+*
4 Throttle Rudder* Rudder* Rudder*
5 AILERON+ ----- ----- -----
6 ----- AILERON+ AILERON+ AILERON+
7 ----- ----- ----- -----
Channels with a grey background cannot be changed!
Channels marked “-----“ can be assigned freely (Î 16.2.).
* automatically changes to
V-TAIL+ if the V-Tail
mixer is activated (=
ON)
(Î 15.1.).