Operation Manual

ROYAL evo 7 - Instructions
Page 31
ENGLIS
H
14. Main menu Control H
The term transmitter control refers to all the elements
of the transmitter to which control functions are as-
signed. They may be sticks, sliders or switches.
The Control menu is dynamic, i.e. it only shows those
controls which are used for the currently active model.
All other controls are suppressed, in order to prevent
confusion caused by unnecessary information. For a
simple fixed-wing model or helicopter the Control
main menu may look like this:
Overview of controls and available parameters
The following table provides an overview of all trans-
mitter controls, in each case with all available para-
meters. The controls are arranged according to fixed-
wing models and helicopters. Some controls may ap-
pear in fixed-wing and helicopters. Controls which have
the same parameters are assembled in groups.
Where you see the  symbol after an available para-
meter, this means that the value may be different in all
flight phases.
for fixed-wing model aircraft
Control Parameter Note Section
Trim 
Display of trim position
in %
14.1.2.
Step
Digital trim increment
0.5% / 1.5%
14.1.3.
D/R
Dual Rate (switchable
control travel)
0% to 100%
14.1.5.
Travel 
Travel adjustment,
0% to 100%
14.1.6.
Aileron
Elevator
Rudder
Expo
Exponential control
effect
-100% to +100%
14.1.7.
Idle Display of ideal setting
14.1.4.
Step Digital trim increment
0.5% / 1.5%
14.1.3.
Throttle
Slow
Slow function (speed
setting) for throttle
0.0 to 4.0 sec.
14.1.9.
Slow
Slow function
(speed setting)
0.0 to 4.0 sec.
14.1.9
Spoiler
Flap
Fixed values

Flight phase dependent
fixed value setting for
the transmitter control
OFF, -100% to +100%
14.1.8
for model helicopters
Control Parameter Note Section
Trim 
Display of trim position
in %
14.1.2
Step
Digital trim increment
0.5% / 1.5%
14.1.3
D/R
Dual Rate
(Switchable travel)
0% to 100%
14.1.5
Travel 
Travel adjustment
0% to 100%
14.1.6
Roll
Pitch axis
Yaw
Expo
Exponential
control effect
-100% to +100%
14.1.7
Coll. p.
P1...P6 
6-point coll. pitch curve
coll. pitch values:
P1...P6: -100% to +100%
14.1.10
Min. Throttle min. (idle)
0% to 100%
14.1.12
Throttle
P1...P5 
5-point throttle curve
P1...P5: 0% to 100%
14.1.11
RPM
Fixed
values

Flight phase dependent
fixed value setting for
speed controller
OFF, -100% to +100%.
Fixed values for the
speed controller are
switched off using
switch G
14.1.8
Thr. limit
– No adjustments
for fixed-wing models and helicopters
Control Parameter Note Section
L. gear
Slow
Slow function
(speed setting)
0.0 to 4.0 sec
14.1.9.
Aero-tow
Brake
Gyro
Mixture
– No adjustments
AUX 1
AUX 2
– No adjustments