Operation Manual

ROYAL evo 7
Page 24
Press the “ENTER” button or one of the 3D digi-adjustors
to open the sub-menu.
The sub-menu now opens.
(Example “Enter owner’s name”:
sub-menu “User “):
To help you remember where you are, the first line
again displays the symbol for the associated main
menu, together with the name of the currently selected
sub-menu.
(Example: switching language:
Main menu Setup: “L“ / sub-menu “ User “)
Note:
If the screen area is not sufficient to list all of the sub-
menus, you will see arrowheads “ © “ or “ ª “ at the
edge of the screen. You can then simply “leaf through”
up or down using the UP / DOWN buttons ( / ) or
one of the two 3D digi-adjustors in order to reach the
start or end of the list. This is similar to “scrolling” in a PC
program. Example:
11.3.3. How to change values / settings
We will enter the user’s name as our example.
Starting from the status display, this is the procedure:
1. Press the L button.
This takes you to the Setup menu. There you can
select the User sub-menu using the UP / DOWN
buttons ( / ) or one of the two 3D digi-
adjustors. Press ENTER (or one of the 3D digi-
adjustors) to move to the sub-menu.
2. Now select the Name parameter using the UP /
DOWN buttons ( / ) or one of the two 3D digi-
adjustors.
3. To change the settings / parameters (in our exam-
ple “Entering the user’s name” Æ Name) press the
ENTER button or one of the 3D digi-adjustors.
If you are dealing with a % value, you can now
change the selected value / parameter using the
UP / DOWN ( / ) buttons or one of the 3D digi-
adjustors.
In our example “Entering the owner’s name” we
will use the keypad to input text (Î 11.1.3.).
Press the ENTER button (or press one of the two
3D digi-adjustors) to confirm your input and leave
the input field.
Note regarding storing:
Altered values are stored immediately. It is not
necessary to store information manually.
 TIP!
Using the REV/CLR button
The value of a parameter can be altered using either the
UP / DOWN buttons ( / ) or one of the two 3D digi-
adjustors. Many % values can be reversed (or reset to
the default setting) by pressing the REV/CLR button.
11.3.4. How to return
When you leave the input field, the cursor returns to the
parameter you last selected. In our example “Entering
the owner’s name” Æ Name :
To leave the sub-menu and main menu navigate to Ҭ
Exit “ in the second line (Fig. 1) and press the ENTER
button (or one of the two 3D digi-adjustors. Repeat this
procedure until you land back at the status display.
Fig. 1 Fig. 2
 TIP!
Switching directly to other main menus
If you wish to switch from any menu to another main
menu, you can do this simply by pressing the approp-
riate direct access menu button.
 TIP!
Returning to the status display
Pressing any direct access menu button twice takes you
quickly to the status display you last used. Require-
ment: you must not be at a parameter value (in an input
field).