Operation Manual
ROYAL
pro
66
15. Main menu ¢Control
The main menu Control is opened by pressing this
button:
H
The term transmitter control refers to all those operating
elements on the transmitter which are assigned to a
control function. These include sticks, sliders and
switches.
This menu is dynamic, i.e.:
x The menu content differs for fixed-wing model air-
craft and helicopters.
x The screen only displays those transmitter controls
which are used directly to control servos or mixers.
x Controls which have no variable parameters are
not displayed
(
Tow rel., Brake, Mixture, AUX1 and AUX2).
For a simple fixed-wing model aircraft or helicopter the
main menu
Control may look like this:
Typical fixed-wing model aircraft:
¢Control
¨Exit
Aileron ....
Elevator ....
Rudder ....
Throttle ....
Spoiler ....
ªFlap ....
TriggerPoint ....
Typical model helicopter:
¢Control
¨Exit
Aileron ....
Elevator ....
Rudder ....
Collect. ....
Throttle ....
TriggerPoint ....
15.1. Menu Control
Control
Parameter Default
Aileron
Elevator
Rudder
Trim Current trim (display only)
Step Trim increment
0.5% 1.5% 2.5% 3.5%
D/R Dual-Rate
10% to 100%
Trvl Transmitter control travel setting
Flight phase specific
0% to 100%
Expo Flight phase specific
-100% 0% 100%
Throttle
TrCut Motor CUT switch,
(display only, with Status * =
active)
Trim Current trim
(display only)
Step Trim increment
0.5% 1.5% 2.5%
Mode Effect of throttle trim
HALF = from idle to half-throttle
FULL = from idle to full-throttle
Expo Expo
-100% 0% 100%
Slow Delay, only when throttle is opened
0.0s to 6.0s
Spoiler
Flap
Time Slow function
0.0s to 6.0s
Fixed value
Flight phase specific
-100% OFF 100%
L. gear
Time Slow function
0.0s to 6.0s
Tow rel.
Brake
Gyro
Mixture
AUX1
AUX2
No adjustment at the transmitter control end!
Adjustment is only possible in the menu
¤Servo, Calibrate
Direction of rotation á
Centre P3
End-points P1, P5
Curve points P2, P4
TriggerPoint
(Î 15.3.)