Operation Manual

Manual
25
11. The “ROYAL pro ” philosophy
11.1. Operating the ROYAL pro
11.1.1. Using the keypad
The ROYAL
pro is programmed using the keypad and
the two 3-D digi-adjusters. There are eleven buttons in
all.
a. Six buttons for direct access to main menus
L
Setup (Configuration)
H
Control
G
Mixer
K
Servo
A
Timer
I
Memory
b. Special function buttons
F
Allocate 3-D digi-adjuster for:
altering values in flight Î 20.1.
calibrating servos Î 17.1.2.
Activate scanner when switching on
REV/CLR
Reverse (REVerse) Erase (CLeaR).
Many set-up values (% values) can be restored to
the default setting using this button
ENTER
Menu / Open / Close parameter

Cursor up / Increase values

Cursor down / Reduce values
c. Text input buttons
The ten buttons with inscribed letters are used for en-
tering text (name of transmitter owner, model, free
mixers, assignment lists):
Text is entered in the manner familiar from mobile
telephones. The two 3-D digi-adjusters can be used to
select individual characters in the input field.
The characters which can be called up by rapidly and
repeatedly pressing one button are printed in small
script below the direct menu access buttons (row 1)
and above the working buttons (row 2).
When you enter a letter at the start of a text input, or
after a space, this is automatically displayed as a
capital letter, with the following letters automatically
set in lower case. If you wish to enter a series of capi-
tal letters, simply ‘leaf past’ the lower-case letters, and
the capitals will follow. When you select a letter, the
cursor automatically moves on to the next position.
The cursor can also be moved forward or back manu-
ally to any position using either of the two 3-D digi-
adjusters.
Text input is concluded by pressing the ENTER but-
ton. The screen now displays a request to input text:
Clear rest
of line?
Yes ->
REV
/CLR
No -> ENTER
x Pressing the REV/CLR button erases all inputs af-
ter the last position of the cursor.
x Pressing ENTER leaves the text unchanged.
Entering special characters:
Certain buttons can also be used to enter characters
in addition to the printed ones, such as accented let-
ters and other special characters:
Button Character
ABC1
A B C Ä 1 a b c ä
DEF2
D E F 2 d e f
GHI3
G H I 3 g h i
JKL4
J K L 4 j k l
MNO5
M N O Ö 5 m n o ö
PQR6
P Q R 6 p q r
STU7
S T U Ü 7 s t u ü
VWX8
V W X 8 v w x
YZ_9
Y Z 9 y z _ ( ) { }
/-#0
0 / ? ! - + % # & < > *
Space character
11.1.2. Using buttons when operating a model
The REV/CLR button resets all timers to
the set alarm times.
The 3-D digi-adjusters can be allocated
to any parameter which is marked in the menus with a
hyphen “-” (Î 20.1.).
Button
F is used to unlock / lock the values allo-
cated for adjustment:
Fig. 11.1.2.1.: Aileron Expo allocated to the right-hand 3-D
digi-adjuster
a. Value locked b. Value unlocked