Operation Manual

Menus
PROFI TX
Page 123
covers the entire setting range.
the setting for the rotational speed
around this axis. In neutral position the
rotational speed is maintained at zero:
The model always points in the same
direction.
The sensitivity setting ranges from
0% ... 100%:
The sensitivity setting ranges from
-100% ... +100%:
Fixval.Sense
With this parameter, a fixed gyro sensitivity is set for each individual flight phase.
Alternatively, a control can be used. If this is preferred, set the sensitivity to OFF
and assign a control to the Gyro control function. Refer to page 101 for more
details regarding controls assignment.
o The following applies to pure Damping gyros: Adjustment range: 0% to +100%
o The following applies to Heading gyros:
Adjustment range for heading-hold: -100% to -1%
Adjustment range for damping: 0% to +100%
Only the value of the activated flight phase can be displayed. When implementing
changes make sure to activate the desired flight phase first.
The next line indicates if a heading gyro operates in Damping or Heading mode.
If the sensitivity parameter is set to OFF and a control is assigned to the "Gyro"
control function, the value supplied by this control and the respective identifier (<E)
are displayed next to it on the right. If no control is assigned, nothing is displayed
and the sensitivity setting is zero.