Operation Manual

Menus
Page 108
PROFI TX
Cu
The input passes through a 7-point curve before mixing. You can
choose from 8 curves. The same curve can be used for multiple
inputs in different mixers. This eliminates extra configuration effort.
When scrolling through the 3rd column of the mixer definition you will see any
combination of the icons described above in the following order:
Icon
Effect
™ 2
Symmetrical, for surface pairs moving in opposite directions
™+ 2
Symmetrical, for surface pairs moving in opposite directions with
offset
™+
Symmetrical, with offset
™- 2
Symmetrical, for surface pairs moving in opposite directions with
deadband
™-
Symmetrical, with deadband
™
Symmetrical
š
Asymmetrical
š 2
Asymmetrical, for surface pairs moving in opposite directions
›
Single-sided
›+
Single-sided, with offset
›-
Single-sided, with deadband
œ
Single-sided, with additional set point at half travel
Cu1
to
Cu8
Curve mixer: The mixer input passes through one of 8 control
curves.
Cu1 2
to
Cu8 2
Curve mixer as described above, for surface pairs moving in
opposite directions