Operation Manual
4. CONTROLS
4.1 DESCRIPTION OF CONTROLS
t „INC“- AND „DEC“-BUTTONS
The "INC" and "DEC" buttons are used to navigate within a menu as well as increasing
(INC) and decreasing (DEC) a value setting.
1. INC
The arrow symbol will be scrolled line-by-line upwards until the required line is
highlighted. The settings of the charge as well as the discharge parameters are
increased by one step within the menu.
2. DEC
The arrow symbol will be scrolled line-by-line upwards until the required line is
highlighted. The settings of the charge as well as the discharge parameters are
deccreased by one step within the menu.
3. Holding one of the buttons down automatically increases the parameter value.
t vENTER“-BUTTON
1. Operating the button within the line marked with an arrow,
selects one of the parameters.
2. Continuous pressing the button will start a charge-/ discharge-/ cycle
procedure.
Operating Instructions
Power Peak
®
Twin EQ-BID
7
11-28 V DC
power supply
Graphic display
128 x 64 dot
matrix
USB port
OUT 1
"MODE" -button
“ESC“ Taste
Temperature
Sensor
Output 1
Equalizer port:
Output 1
v$)i5BTUF
Select OUT
1/2
“ENTER” button
OUT 2
Temperature
Sensor
Output 2
“INC” button
“DEC” button
Connection
for the BID-
chip/ key
Output 1
Connection for
the BID-chip/
key
Output 2
Equalizer port:
Output 2
OU
T
1
O
U
T
2
# 30 8563
41