Operation Manual

3. TECHNICAL SPECIFICATION

Operating voltage: 11 V...28 V DC, (12 V as well as 24 V lead battery or a powerful

mains power supply. do not use a car battery charger!

Cell count: Output1:

1-18 cells NC / NiMH

1-7 cells LiFe, LiIo, LiPo

1-12 cells Pb / lead

Output 2:

1-18 cells NC / NiMH

1-7 cells LiFe, LiIo, LiPo

1-12 cells Pb / lead

OUTPUT OUT 1 and. 2:

Charging current: 0.1 ... 20 A (max. 500 Watt at 24 V; max. 250 W with 13,5 V pro

Output)

Discharging current: 0.1 ... 10 A (max. 50 Watt per output)

Equalizer connection: for 1-7 cells LiFe, Lilo, LiPo

Discharge voltage.: 0,1 ... 1,1 V per cell (NiCad- / NiMH-batteries)

2,5 ... 3,7 V per cell (LiPo- batteries), 2,5...3,6 V (LiIo), 2,5...3,3

V (LiFe)

1,8 V per cell (lead batteries)

Trickle charge : 0 ... 500 mA, adjustable in 50 mA steps for NC- / NiMH-

batteries, C/20 with BID Chip

Equaliser current: approx. 300 mA

Charge Cut-Off:

NC/NiMH: automatic, digital Delta-Peak system

Cut-off sensitivity: 5 ... 25 mV per cell NC-batteries

3 ... 15 mV per cell NiMH- batteries or ZERO peak

Lead and lithium: automatic, voltage-dependent, CC-CV method

(LiPo 4.2 V, LiIo 4.1 V, LiFe 3.7 V, lead batteries 2.3 V/ cell)

Temperature cut-off: 10 ... 65°C, adjustable in 1°C steps

Capacity monitoring: 10 ... 150 %, adjustable in 10 % steps (NC- / NiMH- batteries)

10 ... 120 %, adjustable in 10 % steps (Lithium- / lead batteries)

Time limit: 20-300 Min. / Off

TCS (Terminal Capacity

Selection) capacity cut-off/ end warning with 10- 100% charge condition of the Lithium

battery

Dimensions: 170 x 175 x 60 mm

Weight: approx. 1220 g

Operating Instructions

Power Peak

Twin EQ-BID

# 30 8563