Operation Manual

8. PROGRAMMING A BID CHIP / KEY

As soon as a BID chip/key is connected to the

charger, the charger switches to the mode for pro-

gramming a BID chip/key. The same applies if the

charger is switched on with a chip connected.

All parameters for the battery, for which this chip is

to be used, can be set from this menu. In addition,

stored charge or discharge values can be read (see

Section 8.3). The programming menu is exited on

removing a BID chip/key and the Start display is

shown again.

8.1 MENU STRUCTURE, PROGRAMMING PROCEDURE

Operating Instructions

Power Peak® Quad EQ-BID 230 V

připojte

čip

odpojte

čip

‘ENTER’-

Button

‘ENTER’-

Button

‘ENTER’-

Button

‘ENTER’-

Button

‘ENTER’-

Button

‘ENTER’-

Button

‘ENTER’-

Button

+/-

Button

+/-

Button

+/-

Button

+/-

Button

+/-

Button

+/-

Button

+/-

Button

# 30 8196