Operation Manual

5. USING THE CHARGER FOR THE FIRST TIME
Connect the charger to a 230 V 50 Hz mains socket.
5IFMBOHVBHFTFMFDUJPONFOVBQQFBSTJGUIFhhCVU-
ton is pressed and held while connecting the supply
voltage. This can be
5IFMBOHVBHFTFMFDUJPONFOVBQQFBSTJGUIFh*/$h
button is pressed and held while connecting the sup-
ply voltage.
set separately for each charger.
The menu language can now be selected from this display. The available languages can
CFTFMFDUFEPOFBGUFSUIFPUIFSXJUIUIFh*/$hPSh%&$hCVUUPOT*OEPJOHTPUIFSFBSFUIF
following options available:
t (FSNBO
t &OHMJTI
t 'SFODI
t *UBMJBO
t 4QBOJTI
Language selection must be concluded by pressing the ENTER button. The start display
shown above will then appear.
5.1 WORKING DISPLAY
This display provides the user with all the necessary information during a charging or
discharging operation. The upper line of the status display shows the type of operation
(C for charging, D for discharging, F for
finish and alternately C/B for balancing
lithium batteries). The charged or dischar-
ged capacity and the time elapsed since
the start are also shown on the top line.
The type of battery (NC for nickel-cadmium
battery, NM for nickel-metal battery, LP for
lithium-polymer battery, Li for lithium-ion
battery, LF for lithium-ferum battery and
Pb for lead battery) is shown on the bottom
line. The display therefore shows all impor-
tant parameters at a glance during a charging or discharging operation.
Operating Instructions
Power Peak® Quad EQ-BID 230 V
8
Status indicator
Battery
type
Current battery
voltage
Charge or
discharge
current
Time
elapsed
Capacity indicator
# 30 8196
32