Operation Manual

STOP / ENTER BUTTON

t "DVSSFOUPQFSBUJPOFH$)"3(&DBOCFUFSNJOBUFECZQSFTTJOHUIF4501CVUUPO

t 5IF&/5&3CVUUPODPOGJSNTBTFMFDUJPOFHBDUJWBUJPOPSEFBDUJWBUJPOPGBTFMFDUFE

menu.

DATA VIEW BUTTON

t 4IPXTUIFDIBSHFSEBUBFHJOQVUWPMUBHF1SFTTJOHUIJTCVUUPOBMTPTIPXTBMMJOEJWJ-

dual cell voltages of a connected LiPo battery pack.

All buttons have an Autorepeat function so that the respective function is repea-

tedly switched when the button is held pressed.

INTEGRATED SOUND GENERATOR

t5IFQJF[PCV[[FSDPOGJSNTFBDIUJNFBCVUUPOJTQSFTTFEBOEBDPVTUJDBMMZTJHOBMTUIFFOE

of charging/discharging as well as any faults.

4. TECHNICAL SPECIFICATION

Operating Voltage: 230 V AC/ 50 Hz

Cell count: 1 ... 14 cells NC/NiMH,

1 ... 6 cells LiIo (3.6 V), LiPo (3.7 V), LiFe (3.3 V)

1 ... 6 cells (2...12 V) lead-acid battery

Charging current: 0.1 ... 5 A at max. 50 W

Discharging current: 0.1 ... 1 A at max. 5 W

Equalizing current: max. 250 mA

Charging power: 50 W, current is controlled to suit

e.g. 24 V battery voltage, charging current approx. 2.0 A

e.g. 28 V battery voltage, charging current approx. 1.7 A

Discharging power: 5 W, current is controlled to suit

Trickle charge: Charged capacity <1 Ah: No trickle charge

 $IBSHFEDBQBDJUZ"I5SJDLMFDIBSHFBU$

(only with NC and NiMH)

Cut-off voltage: 0.8 V per cell for NC and NiMH,

3.0 V per cell for LiPo, Lilo

2.5 V per cell for LiFe

1.8 V per cell for lead batteries

Charge Cut-Off:

NC/NiMH: automatic, digital Delta-Peak system

Lead and lithium: automatic, voltage-dependent, CC-CV method

Dimensions: est. 225 x 170 x 40 mm

Functions: Charge, discharge, discharge-charge, balance

10 internal memory locations

Note:stated values refer to a single charge output port!

Operating Instructions

Power Peak® Quad EQ-BID 230 V

# 30 8196