manual

19
Parts List - Dogfighter
Part No. Description Material Dimensions
No. off
1 1 Building instructions
3 1 Decal sheet, racer Printed adhesive film 330 x 700 mm
3 1 Decal sheet, fighter Printed adhesive film 330 x 700 mm
4 1 L.H. fuselage shell Moulded Elapor foam Ready made
5 1 R.H. fuselage shell Moulded Elapor foam Ready made
6 1 Fuselage in-fill piece Moulded Elapor foam Ready made
7 1 Wing Moulded Elapor foam Ready made
8 1 Canopy Moulded Elapor foam Ready made
9 1 Tailplane Moulded Elapor foam Ready made
10 1 Spinner Black EPP Ready made, Ø 62 mm
Small parts set
20 3 Velcro tape, hook Plastic 25 x 60 mm
21 3 Velcro tape, loop Plastic 25 x 60 mm
22 2 Latch catch Inj.-moulded plastic Ready made
23 2 Latch tongue Inj.-moulded plastic Ready made
24 2 Glue-fitting horn Inj.-moulded plastic Ready made
25 2 Swivel pushrod connector Metal Ready made, Ø 6 mm
26 2 Washer Metal M2
27 2 Nut Metal M2
28 2 “Twin” control surface horn Inj.-moulded plastic Ready made
29 2 Articulated pivot barrel Metal Ready made, Ø 6 mm
30 4 Allen-head grubscrew Metal M3 x 3mm
31 1 Allen key Metal 1.5 mm A/F
32 2 Screw Plastic M5 x 35mm
33 2 Wing spreader plate A Inj.-moulded plastic Ready made, M5
34 2 Wing spreader plate B Inj.-moulded plastic Ready made, M5
35 2 Glue-fitting screw bush, M5 Inj.-moulded plastic Ready made
36 1 Firewall Inj.-moulded plastic Ready made
37 2 Motor mount Inj.-moulded plastic Ready made
38 4 Firewall adjuster screw Metal M3 x 10 mm
39 2 Firewall attachment screw Metal M3 x 16 mm
40 1 Battery bearer plate Inj.-moulded plastic 20 x 60 mm
41 1 Battery retainer strap Plastic 16 x 200 mm
42 2 “Nano” servo mounting frame, upright Inj.-moulded plastic Ready made
43 1 L.H. pushrod fairing Inj.-moulded plastic Ready made
44 1 R.H. pushrod fairing Inj.-moulded plastic Ready made
45 2 Aileron pushrod, one Z-bend Metal 1 Ø x 70 mm
46 1 Elevator pushrod, one Z-bend Metal 1 Ø x 80 mm
47 1 Rudder pushrod, one Z-bend Metal 1 Ø x 110 mm
48 1 Spinner holder Inj.-moulded plastic Ready made
Spar and spar cap set
50 1 CFRP main wing spar Rectangular CFRP strip 6 x 1.5 x 225 mm
51 2 ‘Snake’ outer sleeve Plastic 3 / 2 Ø x 415 mm
52 3 GRP spar cap GRP 1.3 Ø x 800 mm
RR Dogfighter (only available in RR-version)
60 3 Servo and output arm Nano-S UNI
Power system parts for RR version
61 1 Brushless outrunner motor Metal Himax C 3516-1130
62 1 Brushless speed controller MULTIcont BL-40 S-BEC
63 1 Propeller driver Metal ACC 370
64 1 Propeller Plastic 10 x 7" APC-E
65 4 Screw Metal M3 x 12 mm
66 4 Washer Metal M3
67 2 Servo extension lead 150 mm
RR instructions
1.1 1 Supplementary instructions, RR
1.2 1 Power set instructions
1.3 1 Speed controller instructions